Free Books Online

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

Raise your hand if you’re a fan of traditional interior design schemes. Because today we are proud to present a wonderful house of fascinating details are located in Gothenburg, Sweden. Seen on Skeppsholmen, the project has a nice open living room, which covers the dining room, as well as the terrace and garden. On the second floor above the living room is furnished with a bedroom in the attic, and storage facilities well. Basement can accommodate storage / boiler room and laundry area with washing machine. The entire house is a charming and traditional, because of the presence of many moving parts in wood and other interesting colored decorations. We invite you to explore all and be inspired!

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

Game Recording with MPEG-4: using H.264/AVC in Programs such as Dxtory, Bandicam and MSI’s Afterburner (Text-Only, Long Version)


This article is a Text-Only version, showing how to use a few programs (one of them completely free) to utilize this efficient codec in game recording, using steps and settings that I personally found optimized performance and showing which ones slowed things down when recording. 
For a video example of how to set the x264/AVC codec recordings to be editable in
Sony’s Vegas or Adobe’s Premiere video editing applications, see my post about it here:
http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html

The MPEG-4 video codec has been around for over a decade now. I remember recording TV shows to watch later on, on a system with an ATI All-In-Wonder videocard (back when videocards had only 8MB of VRAM!) and the joy of the changes I was seeing, going from compressing the shows in MPEG-2 format to MPEG-4 using either Quicktime or DivX (or it’s open-source competitor, XviD). Smaller file sizes and still decent quality? Awesome. Those were MPEG-4 Part 2 or ASP (Advanced Simple Profile) iterations of MPEG-4. Today, we are up to MPEG-4 Part 10 or AVC (Advanced Video Coding) and great times are to be had by all who record their video game adventures, as modern hardware and capturing apps allow not only for h.264/AVC to be used for video compression and archiving – it can also be used for small filesize ‘live’ game recordings and great retainment of detail, if desired.

Dxtory, Bandicam and MSI Afterburner all provide the ability to utilize the various codecs installed on your system to record with (others do as well, I am merely choosing these more popular game recording apps as examples). To record with MPEG-4/h.264/AVC, it is simply a matter of installing that codec on your computer [if it isn’t already], then choosing it inside of whichever game recording app you prefer. The codec’s interface (GUI, Graphical User Interface) will allow you to change whatever settings you wish – but these settings will be quite different from what you may be used to, if you have done any h.264/AVC video compression in the past. Why?

Because we are going to be balancing the settings – not just for retaining quality at a small file size (as you would like to when archiving a movie to keep on your computer) – but now also for recording speed. For instance, if we try to set things for high compression and attempt to keep detail at the same time (as we would for archiving a movie), it simply takes too long to process and compress the changes between frames ‘on-the-fly’ and save them into a file, when attempting to record game output. This would result in the game ‘lagging’ and dropping frames to try and keep up, as it falls behind dealing with analyzing and compressing and then writing the data, resulting in a video with ‘choppy’ playback as well. So, when recording our gameplay ‘live’, we must now consider the various settings and their affect on how fast we can put through the processing of frames and writing it to a file at the same time.

I will be addressing most of the settings in the h.264/AVC codec, but not all of them. I will be concerned mainly with the ones that will slow down processing, so that things do not take too long and fall behind and cause ‘lag’, both in the game and the resulting video file itself. This differs from compressing for archiving our own movies, because instead of being only concerned with Quality (setting everything on ‘high’ and letting it take as long as it needs), we must now balance Speed of the compression as well, being now more concerned with each of these settings and how they can possibly slow things down when recording the ‘live’ game rendering. As is the nature of live recording, we want it to easily and quickly process the frames and save them to a file. I will explain how to do all of this.

Recording with H.264/AVC

“x.264” is a free/open-source utilization of the h.264/AVC codec (the XiWave GNU GPL MPEG-4 Codec). It is normally a command-line driven executable [when you run it, you type things in, to get it to do things], so what we want for game recording with these programs, is a version with an ‘interface’ so that we can just tell our apps what to do with the mouse and buttons/sliders and it translates it into commands for the codec. All we would have to do is choose a few settings and checkboxes (what most people are used to – a nice, easy, graphical user interface).


Doing a search for ‘x264+windows’, there are a few places you can get the installer/setup program for x264 and Windows, here are the main ones:

This is the “Official” Open-Source Video For Windows version of the x264 codec (Red Logo) at the time of this writing:
http://sourceforge.net/projects/x264vfw/

This official codec is what is covered in the “Easymode” sections of this article


This is an “Unofficial” x264 Video For Windows Codec (Black Logo), at the time of this post, that allows for far more settings to be edited via checkboxes and pulldown menubars, but is more difficult to use (these two links are both the same thing):
http://www.digital-digest.com/software/x264_VFW_Codec.html
http://komisar.gin.by/index.html

This unofficial codec is what is covered in the “Hardmode” sections of this article


Basically, you can see that what we want is a “Video For Windows” version, which (thanks to all those great people that have worked on it over time!) has a nice, easy-to-use interface for picking the settings you want to use, without typing in a long line of commands every time. After installing the codec/interface into Windows, it’s just a matter of opening whatever game recording program you prefer and selecting it to use it.

Here’s how to select it for usage in these three game recording programs:

Recording with x264 and Bandicam

  • Once the codec is installed, run Bandicam and go to the Video tab and click on the Settings button
  • In here, under the Video category, next to Codec, click on the pull-down menu bar (with a little triangle at the end) and choose External Codec, which allows you to use other codecs installed in your system
  • Then, click on the three ellipsis (““) button and it will let you “Select external video codec”
  • Select the “x264vfw” H.264/MPEG-4 AVC codec from the list and click on the Configure button
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

Recording with x264 and Dxtory

  • Once everything is installed (Dxtory requires dotNET 4.0, a download link is on their main Download page), run Dxtory and click on the Movie settings button (which shows a little handy-cam with it’s lcd screen hanging out the side)
  • Under the Video Codec category, next to the word Codec, click the pull-down menu bar (with a little triangle at the end) and choose “x264vfw” H.264/MPEG-4 AVC Codec from the list and click on the little pen icon/button to the right, which opens the Configuration dialog box of the codec
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

Recording with x264 and MSI Afterburner

  • Once the codec is installed, run MSI Afterburner and click on the Settings button at the bottom 
  • In here, go to the Video Capture tab and under the Video Capture Properties category, click on the pull-down menu bar (with a little triangle at the end) and choose “VFW compression”, which allows you to use the other codecs installed in your system
  • Then, click on the three ellipsis (““) button and under Compressor, click on the pull-down menu bar (with the little black triangle at the end) and choose “x264vfw” H.264/AVC codec from the list and then click on the Configure button to the right
  • This is the x264vfw configuration interface and in here are all the settings we will talk about next…
» Note:  To record with x264/h264/AVC and have it easily-importable and recognized properly in NLE’s (Non-Linear video Editing applications, such as Sony’s Vegas and Adobe’s Premiere lines of products [for example]) without having glitches or corruption or other problems, one setting for MPEG-4 codecs must be changed from the Default Setting right from the start. I created a video example of how to change this setting in Bandicam, Dxtory and MSI’s Afterburner and the post with that video can be found here at this blog:
http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html
To understand some of the concepts and settings utilized by this codec (and helpful information to know for game recording and video compression in general), a quick word on Bitrate:

[This section is highlighted in green headings for navigation, to assist you whether you are re-reading this article or you feel you know a lot about bitrate in video editing and wish to skip it]

Bitrate (in Layman’s Terms)  /start

When talking about game recording, bitrate is an expression of the amount of data we are using to create the recorded file [literally, how many bits of information we are using]. It is usually expressed as how much information per second we are telling the codec to use, to represent the frames that are getting pushed through, and save them to our output video file.
The main thing to remember is that More Bitrate = Bigger Filesize

For example, if we record using a 1MB per second (1MB/s) setting, then after 2 minutes of recording (120s), our recorded file size will be 120MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 3600MB (3.6GB).
If we record using a larger amount, let’s say 2MB per second (2MB/s), then after 2 minutes of recording (120s), our recorded file size will be 240MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 7200MB (7.2GB).
It’s that simple. The more bitrate we use, the bigger the recorded file will be. 

For those used to video compression and editing, or even general users of multimedia, you may be more familiar with data rates in the realm of:

MP3 (MPEG-3 audio) song bitrates such as: 128kbps, 192kbps, 320kbps
PSP (PlayStation Portable) video bitrates such as: 768kbps, 1500kbps
DVD (MPEG-2) bitrates such as: 8000kbps, 9800kbps
Blu-Ray/HD bitrates such as: 16000kbps, 25000kbps, 50000kbps

All of these are usually expressed as Megabits/Kilobits/bits over time (in seconds), hence the “ps” at the end.
eg. 16 Mbps = 16,000 kbps = 16,000,000 bps (bits per second)

~bits (lower-case ‘b’) and Bytes (upper-case ‘B’) are different~

There are 8 bits (lower-case ‘b’) in 1 Byte (upper-case ‘B’)
8 bits in 1 Byte
8000 bits = 8 kilobits (‘kilo’, which is 1000 Bytes) = 1 KiloByte
8000 kilobits = 8 megabits (‘mega’, which is 1000 KiloBytes) = 1 MegaByte 

For example, if you were rendering out a movie to upload to YouTube and you chose an output bitrate of “8000 kbps” in your editing/compression application, that is 8 Mbps (bits, lower-case ‘b’), which means 8 Megabits per second. Converting that into Bytes (upper-case ‘B’), means that video will be running at 1 MBps, which is 1 MegaByte per second (upper-case ‘b’). 

At that bitrate (1MB/s), it is the same bitrate as our example above [just under where it says “More Bitrate = Bigger Filesize”] and it will take up roughly 60MB of space on your hard drive every minute of recording. Thus is the interaction between Bitrate and File Size and how to convert between the two. The higher the bitrate setting used, the bigger the output file size will be (the recording). 

There is one other formula to remember: More Bitrate = Better Quality. This formula applies to almost everything digital: video (DVD/BluRay), audio (MP3/MP4), pictures (PNG/JPG), any multimedia that is digital. If you allow/use more bitrate, the picture/music/video is represented better [or to be more precise, closer to the original input] because there are literally more bits used to create the picture/sound/etc.

Quick example – think of a square that is divided up into 9 sections. Now pretend it is trying to ‘represent’ a painting, any painting you can think of. With only 9 blocks of data available (each one can only be a certain color), then it would look like nothing but some colored blocks and barely look like the painting at all. Now, imagine a square divided up into 80 sections. Pretend it is trying to represent the same painting. Even though it will be ‘blocky’ still, if each section can be only one color, it will still look ‘more like the original’ than the 9-sectioned block, right? 

That’s the interaction of bitrate and quality.

Which means, for digital compression, it is essentially a ‘balancing act’ between Quality and File Size, with Bitrate being the tool to measure with. Do you want a high-quality output? Then turn up the bitrate and you’ll end up with a large file size. Do you want a small file size? Then lower the bitrate and you’ll get lower quality as well. That’s the essence of bitrate, in a nutshell.

Bitrate (in Layman’s Terms)  /end



The x264 Interface and Configuration in “Easymode”
(The Official interface with red x264 logo)

With the official version of the interface for using the x264 codec (“x264vfw”), there is only one screen, with pulldown bars to adjust most settings.
The Basic Section

To start with, under the Basic category, there is a Preset setting. This is a very handy setting, which makes many of the more obscure/hidden choices within this codec (there are dozens, behind the scenes) easy to configure. By clicking on the question mark near the bottom right corner (“?”), you can see the intimate details of the different Profiles and Presets that can be selected in these pull-down menu bars within this first “Basic” section of the interface.

For game recording, we are more concerned with speed. We don’t want the codec to break out it’s magnifying glass and scrutinize each frame coming through in strict detail, because that would cause it to slow down, which will cause it to ‘lag’ behind, not only in the game, but in the recorded file itself as well (“choppy-ness”). 
So, the first thing to do, when using this codec for ‘live’ game recording, is to change the Preset setting from it’s original default of Medium to “Ultrafast“. This is the fastest option for this setting.
The other options, such as Superfast, can also be used, but be aware that the more you go down the selections available, the more options are being ‘turned on’ behind-the-scenes with this codec, and while some of them do help apparent quality of the video, they are geared more towards a slow, steady, long-term compression session (like when you might archive a video/movie) with high-quality settings and slow, scrutinizing analysis of the frames. While not a bad thing, for game recording, we don’t want that. We want it to save what we are seeing on the screen fast, to a file. We want speed. Feel free to take a look and learn about the various options the other Presets turn on [many of them are covered in this article further down], but for optimal speed, Ultrafast is the setting to use.
The next pull-down set of options to choose from is Tuning. These are also a set of pre-selected options that, depending on which one you choose here, will enable or disable certain functions in the codec. These choices are helpful is easily fine-tuning the codec to compress a movie/video/clip of each certain type, as it enables options in the background that will help with efficient, detail-oriented compression of that certain type of material. 
For game recording, again we are more concerned with speed. These options, while helpful in a slow, ‘leave-it-overnight’ compression session of clips or movies of ours we want to save; for live game recording we want to leave it at it’s default setting of “None“, so that the codec keeps it’s magnifying glass put away and doesn’t spend any extra time analyzing the frames coming through.
There are two checkboxes below these first two pull-down menus and they are titled “Fast Decode” and “Zero Latency“:
Fast Decode turns off a few options [behind the scenes] that help by reducing the processing ‘load’ of the video stream, such as CABAC and Deblocking [these are explained in more detail further within this article]. These are options that help keep some quality (especially at lower bitrates), but as the name proclaims [“Fast”], for optimal speed of recording we want this option “Checked“, to enable it (which will turn off these extra options for now).
Zero Latency also turns off a few options behind the scenes, ones that increase compression time, such as B-frames [explained later in this post] and how far to ‘look ahead’ at frames coming in, for analysis. Since we want speed for recording our game footage and less analysis [remember, more analysis slows things down], we want this option “Checked” to turn off the extra options that are ‘behind-the-scenes’ with this setting.

The rest of the settings in this Basic section of the interface need not be adjusted for game recording, but a good Wikipedia page, talking about the various Profiles and Levels and their capabilities can be found here:
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC

The Rate Control Section

All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision to make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means 2-3 times the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes for example). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on, but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spent analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording, because the result of this setting [at this time] is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’ which is much higher) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it [and doesn’t]. This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps quality down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression/archiving with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

Some Data / Bitrates seen with CRF

Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
CRF 42  ~1600 kbps
CRF 32  ~6000 kbps
CRF 29  ~8500 kbps
CRF 26  ~14000 kbps
CRF 23  ~22000 kbps (codec default setting for CRF)
CRF 22  ~23000 kbps
CRF 21  ~32000 kbps
CRF 18  ~45000 kbps
CRF 15  ~64000 kbps
CRF 13  ~79000 kbps
CRF 10  ~101,000 kbps
CRF 5    ~119,000 kbps
CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

What CRF setting to use

So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

The higher the bitrate (lower CRF number) the higher the quality and file size will be
The lower the bitrate (higher CRF number) the lower the quality and file size will be

You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

That’s about it for the nice-and-easy one-panel official graphical interface for the x264vfw H.264/AVC codec. Just a few small changes and a decision of what quality/bitrate you would like to use and it is all ready  for you to record with whatever game recording program you prefer. Have fun with it!

What follows below, is the unofficial, more detailed, three-tabbed version of the x264vfw H.264/AVC codec interface. If this version is not installed on your system, or you do not care to use the more complicated version (you definitely don’t have to), then please skip down to the section called 
“Slash-whew-sweating-emoticon”. No version is better than the other, by the way, they both utilize the same codec, one just gives you more options to set [and I happened to install it by accident when learning about recording with the x264 codec in the beginning], that’s all.

The x264 Interface and Configuration in “Hardmode”
(The Unofficial interface with black x264 logo)

There are three main tabs in this version of the x264 Video For Windows interface: 
Main
Analysis and Encoding
Rate Control and Other
Each Tab has many different settings. We will talk about most of them – but not all of them – we are mainly concerned with the ones that will affect game capturing. I am going to be going through the Tabs in reverse order. This will help to explain the concepts in a more logical order [believe it or not].

Rate Control & Other Tab

In the ‘Rate Control and Other’ Tab, our main attention need only be on the VBV bitrate/buffer settings in the first Rate Control area. The other settings can be tweaked, but this need be the only one to change – when concerned only with game capturing – as it can dictate the final output filesize of our recording. 
Why all that math and talk about bitrate above? Because of the very first setting we are going to cover, part of the Rate Control section:

The very first setting in this third tab of the x264vfw interface is something called “VBV max bitrate” and it is expressed in “kbit/s”. Yay, we just learned about that! It means that the value typed in here will be accepted as “kilobits per second”.

What does the “VBV” mean? It stands for “Video Buffering Verifier” and this setting will let us state the overall maximum bitrate we want to restrict the video recording to be, so that it does not go over it. 
Why would we want to do that? Remember that the amount of bitrate (per second) that we are using to record with affects the output video file size. If it is a large amount, the file size will be bigger. If we wanted to restrict the recorded output file size and keep it smaller, we could put an amount in here and it will do it’s best to keep within that amount, allowing us to control how much bitrate it uses to record with (and thus control how big the game recording output will be).
So, to use our example just above, if we wanted to restrict the bitrate of the game recording output to be only 1MB/s (1 MegaBytes per second), what do we do? 
That’s right, we convert it to lower-case (small-‘b’) bits, first:
We want 1 MegaByte per second of a bitrate
1 MegaByte is 1000 KiloBytes
since 1 Byte = 8 bits
then 1000 KiloBytes = 8000 kilobits
so to restrict the maximum bitrate allowed for our capture to 1MB/s (taking up 60MB of drive space per minute of recording) we would put “8000” in the ‘VBV max bitrate’ box.
This box then, gives some control over how much diskspace you want to devote to the game recording file output. If you do not want to restrict the bitrate, do not put anything in these first two boxes on this third tab. 
If you do want to set a restriction here on the bitrate, set a “buffer size” as well (the box just below the first one). This ‘buffer size’ gives a sliding-window-view of how much the codec will keep track of what is going through and ‘watch’ to make sure that it stays below the amount in the box above (the ‘max bitrate’ box). It is used more for compressing for portable devices (which have less RAM and are not able to buffer/keep track of a large amount at a time and therefore must have a restricted amount set here).  
For our purposes – game recording – remember that we must be more concerned with speed (to reduce lag), so in this box, we cannot put a very large amount. Why? Because the larger the buffer, the more that the codec will try to ‘store up’ in RAM, in order to ‘watch it’ (process it) and keep track of how big the bitrate gets, in order to keep our restriction of the ‘max bitrate’ box on it. So, a smaller amount such as “2000” up to maybe “4000” in this ‘buffer size’ box is a good amount. The overall buffer size also allows room for the video to ‘go over slightly and come back down to within’ the amount we set, but the larger the amount is, the more data will be held behind for processing that will be done on the game recording and the slower everything will get – and we don’t want that – we want as close to ‘Lag Free’ recording as we can get. A “0” then, would be the optimal amount to put in here, when speed is a concern; but then we would not be able to set a maximum bitrate… more on this later in the article…
That’s all we will adjust on the Rate Control & Other tab.
Analysis & Encoding Tab
Here’s where we will do the most adjusting, as these settings in here are the ones with the most impact on speed and game recording.
In the Analysis section, the first few adjustments are checkboxes concerning Partitions. Partitions are exactly what they sound like: it is how much the codec will divide up the screen, into sections, so that it can analyze each section and look at what is changing, decide how to compress it, how much to compress it, and so on. For game recording, remember we are more concerned with speed, than messing with how the codec is going to scrutinize the screen, so we are going to uncheck everything in the Partitions sections. Really. We are also going to uncheck the Adaptive DCT setting (which will deselect/lock out/grey out some of the checkboxes for us).
For game recording, we are going to leave a checkmark in the “Fast P-skip” setting.

Frame Types (in Layman’s Terms)  /start

There are three main types of frames in video encoding:
I-type frames
P-type frames
B-type frames

I-frames are ‘Intra-coded Frames’, sometimes called Information Frames, because they hold the most information in a ‘group of frames’ (which is what makes up a video) and therefore I-frames take up the most space (as far as the amount of space it will take up on your hard drive). They also look the best as well, as they usually use a higher bitrate (which is why they take up the more space). They are utilized by the codec to indicate a large change in what is going on in the video/on the screen, like a sort of ‘reset’. They can usually be identified by the screen being ‘cleared up’ of blocks/glitches from video compression, as the compressed video is played back. 

For instance, if you are running down a dark hallway and turn a corner and there is an explosion, in order to more accurately represent that large change in color and motion in the game recording, the codec will most likely decide to insert at least one I-frame and use a larger amount of data to keep more detail as it tries to represent all of the huge changes going on, on the screen and in the frames.

I-frames also serve some other purposes: the ‘intra-coded’ means that they are not dependent on other frames around it in the video  [which is a collection of frames], as they hold all the information needed to represent the frame all within itself [remember ‘inter-murals’ in school involved other schools and ‘intra-murals’ was contained all within your own school, this is the same thing]. 

They also are usually used as Keyframes. Since I-frames contain all the data need to represent the entire frame, on it’s own, video applications can use it as a ‘starting point’ or ‘reference point’ (“keying off of it”) and allow for more compatible cutting/editing on them and use them to start ‘seeking’ from, when editing a video. The two main things to remember about I-frames/Keyframes [the same thing] is that (1) I-frames can stand alone all by themselves, as they have all the information needed to display an image/frame, and (2) I-frames allow video editing programs [like Sony’s VegasVideo/MovieStudio/Pro and Adobe’s Premiere/Pro] to ‘reset’ and show you where you are starting to edit from – if there are a large number of frames between these I-frames (“keyframes”), it will take longer for the program to read between all of them and then show/allow you to start editing from where you have selected in the video editing program (it will take longer overall to edit by hand as the program starts and stops and you have to wait while editing).  

MJPEG game recordings are made up entirely of I-frames, as every frame in the captured video is it’s own JPEG compressed picture and it is the most editing-friendly and compatible codec to capture with, no matter what game capturing program you use. In fact, most video editors can read MJPEG without installing any other codecs on your system 

P-frames are called ‘Predicted Frames’. They hold far less information in a group of frames (video) and take up far less space. They actually only hold the differences from the Previous I-frame, that is, they only keep track of the changes on the screen/what has changed on the screen since the last I-frame, which is why they are far smaller than I-frames. 

For instance, if you are playing a character in a game and you are just standing at the mailbox reading an in-game message, there isn’t much changing on the screen at all. Perhaps on the side of the mail window, there is only someone running by and that is all that is happening on the screen, nothing else is moving at all. P-frames will only keep track of the movement that person running by and not keep track of the mail message or anything else going on in the frame (things that aren’t moving) and it will save only those changes to the game recorded file as P-frames. Hence, they can indeed take up a much smaller amount of space in a game recording, since they are only recording the things that are changing on the screen.

B-frames are ‘Bi-directional Frames’ (called ‘Bi-Predictive Frames’). They hold even less information than P-frames, as they are only keeping track of the differences between any frame before or after itself (even using P-frames that are around it and not needing an entire I-frame to start from). This means they are only only keeping track of very small changes (only one frame ahead or behind) and can therefore be extremely small and take up very little space in a video file. B-frames are one of the reasons why we can archive/compress movies in such small file sizes – only the differences of what is going on, on the screen/in the frames, is being kept track of. Both P and B frames help to save a ton of space when it comes to video compression.

Frame Types (in Layman’s Terms)  /end

Why all that talk about the different types of frames in a group of frames (video)? Because now we can easily understand the next few settings in the configuration window. 
Fast P-skip is a setting that allows the codec to look at P-frames and decide if there are enough changes to analyze it further, or ‘skip’ over them and just process them as they are. This is decided on by the codec when it looks at some other settings on this tab (such as the “ME” settings) but for the most part, it helps speed – our main concern with game recording – more than it helps things to ‘look good’, so we will leave a checkmark in it, as we briefly stated above.
Max frame refs and Mixed refs are talking about Reference Frames and how many to use in a group of pictures/frames. When encoding, a codec can use frames in front (P-frames) or in front and behind (B-frames) of the current frame it is working with, to keep tracks of what has changed between frames. When encoding for movies, we want as many as possible (or as many as the codec decides to put in) in order have things keep a lot of detail wherever it is needed, especially for scene changes; but for game recording, we want things to run faster (so that the game capture does not lag the game or cause lag within the recorded file (“choppy-ness” in playback), so we actually want the codec to use as little number of Reference Frames as possible.
Remember, every time the codec has to ‘think’ or analyze the frames more, it will slow down to break out it’s magnifying glass and scrutinize, so what we want for this setting is the lowest (one) Reference Frame (put a “1” in the Max frame refs box) so it doesn’t have to do much more work than just looking quickly one frame ahead or behind, when when figuring out what has changed. 
Mixed reference frames allow the codec to compress frames based on changes in frames that are also being referenced by other frames [if you can follow that]. Again, the codec is going to have to slow down and take a look, and for game recording, we want things to stay lean and mean (fast), so uncheck this bad boy (if you make the Max frame refs a “1”, it will be disabled anyway, since it does not have enough frames to deal with to look around at them anyway).
The next few settings down that all say “ME” refer to Motion Estimation. This is the process of keeping track of where things are moving on the screen and how to deal with compressing the changes it is keeping track of. For game recording, we want the codec to analyze as little as possible (so it doesn’t lag behind what is going on, on the screen) so we must choose the lowest settings for all of the “ME” options. 
That means “Diamond” analysis as the ME algorithm (pulldown menu choice), an ME range of the smallest we can choose from (“4”) and the lowest amount of Subpixel ME refinement we can have (“0” or no subpixel refinement). Remember, we want the codec to just save what is happening on the screen and analyze as little as possible, so it doesn’t fall behind.
With the choices above, Chroma ME and the Psycho-visual Rate Distortion Optimization strength will be locked out/not applicable, which is good for game capturing, as it scrutinizes the frames that are coming from the game even less.
The next couple settings, in the middle column of the tab, that say GOP in them, are talking about the size of the Group Of Pictures we want in our capture. If you can recall the things we have already said about how a codec decides to compress frames, it looks to frames ahead and behind at times, looking at the differences between them, and then decides how to compress the frames based on what it finds (and the settings we set). For movie compression, we want a large number, so that the codec mainly keeps track of the differences only between frames, as much as it can, and a large GOP size allows it a lot of ‘room to move’ and look around. For game capturing, we don’t want it to be quite as big, as the more frames on it’s plate it has to deal with, the more it will slow down and take time to decide what to do with them. 

There is also a chance that some video editing applications will not like the large (or any) Groups Of Pictures and may see the video stream as corrupted or give wierd artifacts/effects when it plays it back. This is one reason why using MJPEG as a game recording codec is suggested often, as it’s built-in GOP is “1”, as evey frame is it’s own self-contained ‘group’ and no editing app has to mess with it or over-analyze it. It is the most compatible, but you can use any codec you wish, but you may have to change the codec’s Keyframes or GOP to “1” for compatibility [more on this in future articles!]


Hence, we will set a nice low number [I personally used “50” around the time of this post]. Be aware that if the number is a multiple of the framerate you are recording in, Videophiles may notice the screen ‘shifting’ or having other odd effects ‘in time with’ the framerate (eg. if recording at 60fps and the GOP size is 60, some people notice the screen ‘correcting’ or ‘shifting’ or ‘flickering’ every second, as it ends the group or frames and starts a new one every second).
You can use “1”, which will make the codec act like MJPEG in a way, but then the codec will not have any room to analyze/compare/compress anything, and the resulting file will require much more bitrate to keep detail (to accurately represent what is going on in each frame)… more on that later in this article…
Weighted P-frames and Max consecutive B-frames is yet more analysis for the codec to do (especially B-frames, which remember, is a frame that ‘looks both ways’ for changes to frames in front and behind it, therefore can slow down recording a lot). For game capturing, we gots’ta keep setting things for speed and not letting the codec analyze too much. Change the Weighted P-frames to “None” (via a pull down bar) and the B-frames to “0” if they aren’t already. This is effectively telling the codec “you ain’t got time fo’ B-framez” so the rest of the settings that say “B-frames” should be locked/greyed out after that.
[In tests, enabling B-frames would actually crash the x264vfw app]
Under the Encoding section, the last column of this tab, the first section has to do with Deblocking
Deblocking is a way to try and ‘hide’ areas where the codec has cut out detail or ‘let go of data’ (lossy) in attempts to conform to the other settings in the codec and/or compress the frames highly. I’m sure almost everyone has seen Compression Artifacts like macroblocks or Gibbs Effects (mosquito noise) in high/over-compressed video and video streams. It’s not very pretty and turning on the Deblocking filter is one way of masking these artifacts, so that the video overall looks nicer to the human eye. 
The problem with Deblocking is that the codec will smooth things out, when trying to hide artifacts (especially ones that occur with lower bitrates/quality). It can be forced to keep detail with negative values (useful for movies/games with film grain), but overall it still takes more compression time to use, as the codec stops and analyzes the frames, looking for what to Deblock. So, for game recording for the most part, for optimum speed, Deblocking should be disabled, that is, “No Checkmark” in the box for In-loop deblocking filter (which will disable the two Deblocking settings below it).

[In my own trials/experiments, I found that a low amount of deblocking (as in “1”) for these two recording settings is acceptable and helps to hide some otherwise icky-looking compression effects that occur at lower bitrates (bitrate control is covered more in the next section), but for optimum speed (it is not needed at higher bitrates anyway) and especially for older/less powerful systems, turning deblocking off will always speed things up.]
CABAC is extra analysis that can really make a difference in compressing video. Some mobile players cannot even use it though, as it requires more processing power. The optimal setting for this, as it is extra analysis/processing being done – for game recording – would be “Off” (unchecked).

 [I have successfully done many recordings with CABAC on, as it seems to have only a slight effect on recording ‘lag’ on my system; but for optimum speed/less lag when recording (and at a slight loss for keeping some quality), it should be disabled.. for speed. ]

The only other thing to adjust in this tab, when game recording, is the Trellis setting. Trellis is a way of analyzing and attempting to keep certain detail when compressing, especially at lower bitrates, but as many times already mentioned, we want speed for game recording, so set the Trellis analysis to “Off” (via a pulldown bar). 

Main Tab

All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means twice the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed [I just realized this whole article can be it’s own drinking game]. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on [I hate watching a low-quality video stream online and it goes absolutely-stupid blurry at high-motion scenes just because there are many things happening on the screen], but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spend analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording. The result is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it (and doesn’t). This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps it down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

Some Data / Bitrates seen with CRF

Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
CRF 42  ~1600 kbps
CRF 32  ~6000 kbps
CRF 29  ~8500 kbps
CRF 26  ~14000 kbps
CRF 23  ~22000 kbps (codec default setting for CRF)
CRF 22  ~23000 kbps
CRF 21  ~32000 kbps
CRF 18  ~45000 kbps
CRF 15  ~64000 kbps
CRF 13  ~79000 kbps
CRF 10  ~101,000 kbps
CRF 5    ~119,000 kbps
CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

What CRF setting to use

So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

The higher the bitrate (lower CRF number) the higher the quality and file size will be
The lower the bitrate (higher CRF number) the lower the quality and file size will be

You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

Slash-whew-sweating-emoticon

That was a lot to take in at once – but you made it through – and now you are set to record using H.264/AVC, whether you prefer Dxtory, Bandicam or use the completely free-to-use Afterburner from MSI. You are also now knowledgeable in both the Official and an Unofficial version of the x264 Video For Windows graphical way of setting up the codec, to change the settings.

Other than the Rate Control setting above (CRF) which you can adjust and set how you want it, the rest of the settings I have personally tested and found which ones allow for the faster recording performance and which ones negatively affect the speed of recording, utilizing the x264vfw interface (which these programs use to record in H.264/AVC). Turning off/down the ones I have stated throughout the article should give you the fastest/closest to ‘lag-free’ recording you can get with this codec, while still taking advantage of it’s compression capability. [My own Personal Notes/Opinions/Settings are below]

Please note that if your system is older or not as capable (perhaps you have a notebook/laptop which has less capability than a full desktop system with it’s own dedicated videocard and soundcard), you may have to do things like lower the recording resolution (or the resolution you are playing at in the game), increase the CRF number (so that it uses slightly less system resources to process the recording and will then use less bitrate and less disk space).

There are many things that can be done to help with speed, make for smoother recording, less lag, etc.
Here is a link to an article I wrote earlier on this blog, with general Tips to help with game recording:
http://gametipsandmore.blogspot.ca/2012/05/tips-for-game-recording-currently-text.html
No matter what game you play or what program you are using to record, these Tips will help you overall, with trying to record your games.

Lastly, please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you will. 

As always, do some of your own testing, see what works the best for you on your system and get things looking exactly how you want them to look – and have fun with it!


Personal Short Version/Opinion
and 
Settings I use:

H.264/AVC (MPEG-4 Part 10), is not normally a recommended codec to record with, for most people. It does not have the capability of super-high-almost-what-you-see-is-what-you-get quality that other codecs like FRAPS1, YV12, Lagarith or RGB Raw would give you. 
Heck, the highest bitrate possible (using the CRF setting, the fastest of the Rate Control settings in my tests) is only about 100,000kbps. That’s still about 2-4x the bitrate of the average BluRay movie mind you, and it seems fine to me, to look at the recorded videos of it.

Even if I had Terabytes of hard drive space to record to, I would still like to record in as small a filesize as I can, attempting at the same time to keep ‘good enough’ quality. Gone for me, are the days of filling my drives with FRAPS recordings (which have very high quality though) when today, with the more powerful CPUs and GPUs, I can record in a high MJPEG setting (for compatibility with editing apps) or a high MPEG-1 setting (which saves a lot on diskspace as well and has decent compatibility with video editors) – and now I can save even more space and record with MPEG-4 AVC, if desired. 
For instance, on my older system, a dual-core cpu with an NVIDIA GTS250, recording with x264/AVC brings my framerate down by about ten frames per second and sometimes more. On my newer system, a six-core cpu with an AMD HD 6870, recording with x264/AVC, with the same settings, brings my framerate down by only a couple of frames per second with my settings. Wonderful stuff.

I did many, many tests to find out what specific settings made differences (especially with the Unofficial version of the interface) and for the most part, it turned out as intuitive as it seemed at the outset: any setting that increased analysis and processing of the frames slowed things down. 
I had to test it all of course, and I found many settings that didn’t make a ‘huge’ impact on performance, and with more powerful hardware these are able to be used and enjoyed, helping to compress the frames even further, keeping decent detail and resulting in a very small recorded file size. As you can adjust/optimize settings far more in the Unofficial interface (at least a bit easier/graphically), I tend to use that one more than the Official version; but in essence, both are the same thing. Here’s some of my findings [my settings are in these square brackets]:

For the Official (“Simple”, red x264 logo) interface:

I found that, on a more modern desktop system, the Preset can be turned ‘down’ a bit (the amount of analysis going up a bit), to Superfast or even sometimes Veryfast, since many of the hard-cpu-hitting options like Trellis and larger Motion Estimations don’t kick in at these settings. Anything lower/slower than that makes it lag behind too much as it processes frames.
[I usually use Superfast]

While Zero Latency is pretty much required for live game recording, Fast Decode is not entirely needed, especially if you have a faster rig to power the game and record at the same time on. My computer isn’t even top of the line but it can handle NOT using Fast Decode (which disables CABAC, and a couple other things). CABAC can have quite a bit of an effect on quality, and since it doesn’t seem to have a huge performance hit, I use it. Fast Decode also disables Deblocking and that leads into my next setting…
[I always use Zero Latency]
[Even though it helps with speed, most of the time I don’t use Fast Decode]

The only other thing I change in the interface is deciding on the main Rate Control type and Rate Factor. In my own tests, CRF seemed to have the least amount of effect on framerate out of them all, and I fluctuate on what CRF I use, depending on the game I’m recording and what the recording is for. If I’m recording a high-quality test, of course it will be a low CRF, but it need not be a 1 to look good. I am quite satisfied with a CRF of 15-18 for decent-quality captures. The bitrate of a 1080p capture at that CRF ran about 45,000kbps, which is a high-quality BluRay movie’s bitrate. For just average gameplay for fun, I usually run a CRF of 21 up to 23. The quality is ‘good enough’ then, especially with a low Deblocking setting helping out (the Preset of Superfast leaves Deblocking “On” at the default 0:0 setting). I don’t recommend going below CRF23, with deblocking or not, as it just becomes too ‘garble-y’, to use a more technical term… Web broswer/low-motion games or hard-edged/animated games that look like Minecraft also need a higher bitrate (lower CRF), so that the hard edges aren’t messed up and the smooth/flat areas aren’t too compressed and get ‘blocky’.
[I use a CRF in the range of 18 for higher-quality capturing, going up to 23 if disk space is low, and don’t suggest higher than 23, so that quality doesn’t suffer too much] 

Nothing else need be adjusted in the Official x264/red logo interface, but I sometimes add “–keyint 50” or “–keyint 20” into the area (no quotation marks) ‘for advanced users’ at the bottom. This is a command that will force a keyframe/I-frame after that many frames have gone by. This helps to keep the seeking time low when editing and allows for closer cuts when not recompressing the clip when editing. If you having a problem with editing MPEG-4/AVC files, try using a –keyint setting of “1”, so that every frame is an editable/seekable keyframe. A higher GOP is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info). You may want to increase the bitrate to keep quality then though, as the codec can’t really compress/do much of it’s ‘magic’ then, without room to work between frames. As stated above, the optimal codec for editing is MJPEG, but many do not like the quality (try turning it up to 100%).
Leaving it blank and not using any “–keyint” command will allow the codec to use many more frames (250 is the default I believe) for compression and the resulting recorded file size will be very small.

For the Unofficial (“Complicated”, black x264 logo) interface:

The first tab is just the Rate Control setting. CRF seemed to have the least effect on framerate.
I also sometimes add the –keyint setting to the command box at the bottom, just like I talked about a couple paragraphs up.
[I use a CRF in the range of 18 or less for higher-quality capturing, going up to 21 or if disk space is low, up to 23 at the most and don’t suggest higher than 23, so that quality doesn’t suffer too much]

For the second tab, there is a lot to change, but I mainly talked about why up in the article, so I’ll just state what I like to use here, after this paragraph on Deblocking:

Deblocking can be forced to ‘leave things in’/keep details, by using a negative value, especially when dealing with effects such as film grain and minute details and noise; but for the most part deblocking will ‘smooth things out’, especially trying to hide where a lot of detail has been lost, where compression artifacts like Macroblocks and Gibbs Effects (mosquito noise) around edges would show up. I don’t recommend putting deblocking up too high though, as it can really make things downright blurry. With deblocking completely off, all of the detail is kept, but many things can look like they have a ‘wood grain’ pattern on them. With a high bitrate/low CRF, there is no need for deblocking at all anyway, as there would be a lot less compression/artifacting. When recording a high-quality test or something like that, I leave it off. When just recording random gameplay or myself doing something, I turn it on at a low setting, to help with keeping things looking slightly more ‘clean’.
[I use Deblocking at 1:0 (CUDA default) up to 3:0, when I use it, but any more and things start to look ‘too smoothed out’ to me]

For this second tab then:
[No Partitions (all unchecked, Fast P-skip checked, 1 Max reference frame, ME algorithm on Diamond, ME range of 4, Subpixel ME refinement of 0 or 1 (any higher causes more lag), GOP size of 20 or 50 (this is the –keyint setting from above, higher is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info), No Weighted P-frames, Max consecutive B-frames to 0 (none), In-loop deblocking filter unchecked (off) or checked (on) with a 1:1 deblock, CABAC on (it’s slower for less-capable systems), DCT decimation checked (on), Trellis set to Off]

In the third and last tab of the Unofficial (black x264 logo) interface, I sometimes set a VBV max bitrate of about 40000 (kbps) just to keep the filesize down, especially when I’m going to edit and recompress for uploading somewhere (which usually gets rendered out for upload at that bitrate or lower anyway), it looks ‘good enough’ for me (this also requires a buffer of some sort, to allow it to check the bitrate as it goes up and down, so I put in 4000 or 10000 if I set a VBV max bitrate)
[No maxbitrate usually, unless you want to save some harddrive space (eg. 50000k)]

That’s all I change for both of those interfaces, from their defaults, as of the time of this post. 
Keep in mind that as games are updated and Re-Optimized, drivers are Updated, and new hardware is released/purchased, I may change these settings (and I advise you to try some tests too, if you wish, when things change). Also, I am not a stickler for the utmost quality and don’t mind things getting compressed a bit, so you might want tighter/higher settings. 
Mainly, I hope that this info helps some of you to either record with less lag (many people report that with more optimized MPEG-4/AVC settings they have less apparent lag) or just learned some terms and concepts that may help when editing and compressing your own videos/shows/etc and overall just help you record better/smoother. I actually enjoyed testing all of these things out and learning about it and I hope it helps anyone that is recording their gameplay adventures.


See you in the games!

It’s Not Just You™ – HumbleBundle ‘Vegas Pro, Discover Creative Freedom’ Installer/Registration Not Working [Notification]

For the next two weeks (13 Days, according to the Countdown at the HumbleBundle Website, starting today) there is a fantastic offer for Video Editors, Music Composers, Web Developers and more – over $900 worth of Software, including Sony’s Vegas Pro [the Vegas Editing Product Line was bought out by MAGIX, a German software company that has produced it’s own editing software for years, popular for their “Music Maker” and “Movie Edit Pro” lines]. So what’s the issue? Well, this Bundle is so darn popular, many parts of it aren’t working/responding, at this time. For example, if you run into the Installer ‘starting but just closing/crashing’ or the store or program ‘not registering’ or the ‘website is down’… just letting you know… It’s Not Just You™

Part of the reason why this Bundle is so popular (although many HumbleBundles are quite popular at different times), is because one of the main pieces of Software offered is Vegas Pro Edit, originally by Sony. This video editing software is a Premium Version (“high end”) of this program, normally being sold at around $400. Along with other great products, such as Magix Music Maker, Xara’s Photo and Graphic Designer, Xara’s Web Designer, Photo Story Deluxe and more – it’s easy to see why this Bundle is so popular, for all kinds of content creators and producers. Indeed, if you are into (or trying to get into) making music, editing video, or web design, at all; I highly recommend picking up this fantastic bundle of software, if you can. The link/URL to the HumbleBundle directly, is here:

https://www.humblebundle.com/software/vegas-pro-creative-freedom




For those unfamiliar with HumbleBundle, it is a retail site that offers a mix of software, books and games, connected to and donating a portion to, a customer’s chosen Charity. For example, my account is connected to Extra Life, the ‘Gaming Marathon’ Fund Raising charity that I try to play for every November, on behalf of Children’s Miracle Network Hospitals. Because I attached this Charity to my Account, any purchases I make will contribute a portion to my charity. One of the greatest things about HumbleBundle however, is that the products – although one is not able to choose which products to buy specifically – are usually offered in ‘portions’ or ‘packs’ for any amount that you can afford to pay (as low as $1 up to whatever you can pay for the software company/charity/etc); and the more you can pay/donate, the more software/books/games/etc you will get. Since 2010, these ‘Pay What You Want’ Bundles (for Windows, Mac and Linux) have become quite popular over time.

The issue that has arisen this time then, is that the Bundle is so popular, that the server for the Installer has become Unresponsive (“not working”). Even the Website for the Retail/Vendor/Developer itself has become Unresponsive, giving this Error Message [to me] seen below (from Chrome):

As also sometimes happens with the most popular HumbleBundles, some people are experiencing very slow Downloading of their purchased products (as in 256kBps or less). Others are experiencing the Installer for the products stops functioning. This is what I personally am experiencing too (the Installer seems to startup, but then ‘crashes’ (or at least disappears) and is unable to continue. After one random attempt, I got a message stating that the Installer actually tried to Download the Installation Files but could not properly communicate with their servers. The message that came up [for me] can be seen below:

Trying another time later on, I did see the Installer for the ‘MAGIX Music Maker 80’s Version’ pop up and start Downloading, which was nice to see; however the overall download speed was pretty slow [understandably] at about 300kBps.

If I may make a Suggestion then – if you are running into any of the issues above, at this time: my suggestion would be, to definitely pick up the Bundle if you can [Note: You have to purchase the Bundle for at least $20 to get Vegas Pro] – then wait a while before you attempt to install anything. According to the MAGIX website, you can access your purchase (to install it) anytime after buying it, from now until September 2018 [Note: A free Magix account must be created if you do not already have one]. So, there is no rush, once you purchase it, to get the Installation Files from MAGIX. I also recommend backing up your Installation Files, once Downloaded, onto a USB drive, External Drive or even Optical Disc – anything that can back up your purchase for future re-installation, if needed (at least, until you buy a newer version of any applications you like..).

By the way, a quick note about Vegas Pro ‘Edit Version’ (about a 450MB download) – for those wondering about the difference between the Vegas Movie Studio versions and the Vegas Pro versions (and what the ‘Edit’ identifier means), here is a short summary of the differences:

  • the Movie Studio versions of the editor are an easier-to-use, scaled-down version of the Vegas editor, with still many features, allowing up to 200 Tracks of Events (clips/media) – increased from 20 Tracks recently! It just lacks many of the advanced features of the Pro versions (such as the  ‘NewBlueFX Titler’ [professional version], Bézier Tool Masking (“any shape”), et.al). The Movie Studio version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-movie-studio/product-comparison/#productMenu

  • the Vegas Pro ‘Edit version’ of the editor costs less than the other Pro(fessional) versions, as it is missing the DVD/Blu-Ray authoring package, as well as some advanced filters and creation utilities (such as the Boris FX media generators, et.al) – it is still a ‘full featured’ Professional-level Video Editing program however, allowing Unlimited Tracks, full 4K Support, Bézier Tool Masking (“any shape”), includes the ‘NewBlueFX Titler’ [professional version] and much, much more. The Pro version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-pro/product-comparison/#productMenu


[Note that the links above will show the most recent versions of the programs, but the comparisons themselves (the effects and capabilities of each) will remain similar, despite the edition versions changing over time]

Here is a capture of the Vegas Pro ‘Edit version’ comparison, for the 14th edition [CAD prices, sorry]:

Although the Vegas line of editing products have always had a bit of a learning curve due to their more advanced capabilities (Sony used to give out a DVD with some introductory courses for it; I am privileged to say I have one of these), MAGIX has created a few tutorials of their own, which can be found at the MAGIX Vegas Pro Tutorials website, here:

http://www.vegascreativesoftware.com/us/vegas-pro/online-tutorials/

So, try not to let it bother you ‘too much’, if you have run into any of these issues (downloading, installing, registering, etc). Just wait a little while longer and try doing it again, in the near future. For now, don’t worry – It’s Not Just You™…

Good Luck with it – and Have Fun!
[Note: I am not affiliated with Sony, MAGIX or HumbleBundle in any way, and I will not receive any compensation for mentioning them here – I am merely an enthusiastic user of their products and wanted to share what I felt was helpful information/notification. I have used other video editing programs in the past (such as PowerDirector, Nero Vision and Windows Movie Maker and some free video editors, such as Avidemux, DVD Soft’s FreeVideoEditor and VirtualDub) and will still use them when desired in the future]

Addendum:

During the time it took for me to compile this posting, I was able to try again and began Downloading then eventually Installing Vegas Pro [Edit version] – and it is going smoothly still – however, Downloading of the various applications in the Bundle are still quite slow. 
If you do not mind that, dear reader, go ahead and try again now; otherwise, as in my Suggestion, perhaps wait a while (as in days) before attempting to have a fast/smooth installation of these popular applications. 

Choosing a Sensible Diet, Healthy Appetite

So you like to eat! That’s normal. A healthy appetite is one of the greatest assets in life. The whole body seems to respond to the sight, smell, and taste of a well-prepared meal. Every organ responds to the occasion. The glands work more vigorously, the digestive organs operate more efficiently, and the nervous tensions relax. That is why eating is such a pleasure, especially when you are healthy.

Many people, however, are neither sick nor well. They are somewhere in between. They drag themselves around, feeling half dead much of the time. Yet, they are not sick enough to go to bed. What is the cause of their trouble? Many times it is due to a faulty diet. Some victims of nervous conditions could be completely cured if they would only learn to eat properly. The same is true of many others who suffer from digestive complaints. They could all find relief from their miseries by choosing better meals.

So much depends on the right choice of food. This human body in which we live is a superb machine. It is capable of operating smoothly for seventy or eighty years, provided that we treat it well. But if we fail to supply it with the materials it needs, the results may be well-nigh disastrous.

Every time we open our mouths to eat we make an important decision concerning our future.

Good health always begins in the garden. A well-balanced diet naturally includes plenty of wholesome fruits and vegetables.

Diet Start

What we choose to eat will either help to keep us strong and healthy or it will leave us weakened and less prepared to meet the stress and strain of living. The kind of health and the length of life we enjoy probably depend more on the type and quality of foods we choose than on any other factor. The choice is up to us.

It was the Creator’s plan that the foods we eat should keep us young and healthy. Many bring on premature old age by wrong eating habits.

Unfortunately, a great many people never give much thought to their diet. They will eat anything they can get their hands on or that may appeal to their perverted appetites. In their minds one thing is as good as another—or as bad. They will eat at any odd time whether they are hungry or not. No wonder they are sick! The human digestive system was never intended to sustain this kind of abuse.

Don’t Be a Faddist

On the other hand, there are some who react quite differently. They take great pains regarding what they eat. They are so careful to avoid anything that they suspect might cause them trouble. They are so particular in everything they do. Every now and then they go on some newfangled diet in the hope of winning back their lost energies. This means that they often deprive themselves of the very things they so much need. Such people are slowly starving themselves in the midst of plenty.

In most cases there was nothing radically wrong with such people. They simply didn’t know how to feed themselves in a proper manner. They were not intelligent on some of these most vital issues of life.

It should seem perfectly obvious to everyone that our bodies are built up entirely from the things we eat. We have no other way of getting these important substances into the system. Yet how few of us really think very much about this. To keep well we must develop different tastes. Our appetites need to be educated. For instance, we must realize that we cannot continue to eat devitalized foods without paying for our folly.

Foods that are highly flavored with sugar and condiments are usually devoid of some of the most important elements needed by the body. The seasonings often cover up the natural flavor to satisfy an abnormal appetite. But such foods may be completely lacking in the vital elements necessary to maintain a person in good health.

Rules for Choosing a Sensible Diet

Choosing a sensible diet is not so difficult. There are a few simple rules that anyone can follow. First of all, it is important to have plenty of variety in your diet. Don’t be satisfied with the same old humdrum meals. Look around for something new and different—avoid monotony. Find new ways of preparing food. It is a fact that the more variety you have, the less you are likely to suffer from some dietary deficiency.

The second rule is to learn something about the different materials your body needs. For instance, if you are going to build a house, you will have to buy certain supplies, such as timber, glass, bricks, plaster, nails, paint, and many more. In the same way the human body needs different building materials for the important job it has to do. These things are essential at every age of life, but more particularly during those rapidly growing years of childhood and youth. They are also necessary when one is recovering from some serious illness or injury, or during pregnancy and lactation.

What are these different materials? Doctors refer to them as proteins, fats, carbohydrates, amino acids, vitamins, minerals, and water. These are the materials of which the body is composed. They are present in our foods. When these various substances are absorbed into the blood stream, they are usually stored in the liver and other organs until they are needed. With the exception of water, each must undergo certain changes before being used in the human system. Myriads of chemical reactions are taking place within your own body at this very minute. This is what keeps you healthy and strong, so that all your organs will be working at full capacity.

From our foods we get the materials out of which the bones, muscles, nerves, skin, and all the internal organs are formed. From our food we also derive the energy we need in carrying on all the activities of life. In addition, we must have other important chemicals that are needed to regulate the activities of every organ in the body. Unless these materials are present in our daily diet, we are likely to suffer from some deficiency. Sooner or later we will find ourselves in real trouble.

The average diet of many families today is lacking in certain of these nutrients. Sometimes the trouble is due to insufficient protein. At other times it may be a loss of vitamins or minerals, which may have occurred during the preparation of the food. Some people try to make up for a deficient diet by taking extra vitamins in the form of pills. These may help, but they will never take the place of good food in supplying the needs of the body. There is always danger in trying to follow some haphazard, unbalanced diet. Only a sensible way of living will enable us to enjoy a full and satisfying life, free from diseases that could have been avoided.

Astaxanthin – Anti-Oxidant Superstar

While many antioxidants can be obtained by eating organic fruits and vegetables, astaxanthin is derived only from a specific microalgae called Haematococcus pluvialis.  The algae uses astaxanthin to protect itself from intense sunlight, ultraviolet radiation and low nutrition.

There are two natural astaxanthin sources: the microalgae that produce it and the salmon and krill which consume the algae directly. The best resources for these foods are wild-caught Alaskan Salmon and Krill Oil Supplement, which offer many other nutritional benefits.

Research indicates astaxanthin may benefit those suffering from inflammatory conditions including arthritis, rheumatoid disorders, metabolic disease, as well as cardiovascular, neurological and liver diseases.

Astaxanthin can also help to increase your muscle capacity and stamina, decrease workout recovery time, and decrease muscle pain.  Other proven benefits include:

Reduction of Inflammation
Protects Vision
Enhances Heart Health
Decreases Oxidative Stress
Protects Against Sunburn
Boost Your Immune System
Helps Prevent and Fight Cancer

Astaxanthin and Eye Health

Astaxanthin is an extremely powerful anti-oxidant:  65 times more powerful than vitamin C, 54 times more powerful than Beta-Carotene and 14 times more powerful than Vitamin E.
Astaxanthin crosses the blood-brain barrier AND the blood-retinal barrier which is a huge deal for your brain AND your eyes!

Astaxanthin is a member of the carotenoid family of anti-oxidants that include beta-carotene, lutein and zeaxanthin.   Of all the carotenoids, only zeaxanthin and lutein are found in the retinas of your eyes.  This is because your eye is a highly light and oxygen rich environment, and it needs a large amount of free radical scavengers to prevent damage. 
Scientists have specifically studied astaxanthin for its effects on the eyes and discovered that it is completely safe, and much more potent than all the other carotenoids.   Specifically it has been shown that astaxanthin supplementation can be effective in preventing a whole list of eye diseases including:

Age-Related Macular Degeneration
Diabetic Neuropathy
Cystoid Macular Edema
Central Retinal Arterial and Venous Occlusion
Glaucoma
Inflammatory Eye Diseases including retinitis, iritis, keratitis, and scleritis

Astaxanthin is one of the few anti-oxidants that you should consider supplementing because you cannot obtain the recommended dosage from your diet alone.      The good news is that there are excellent Astaxanthin Supplements available from companies like Jarrow, Doctors Best, and Swanson to name a few.   It should be taken with a meal with fat because it is fat soluble with dosage from 4mg – 12mg per day although there are no harmful effects from higher dosages.

MODERN RESIDENCE LAKE HOUSE DESIGN BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

See all of its 340 square meters, the lake house designed by David Guerra Architecture located in Minas Gerais, Brazil. The very steep terrain, as the permit was built by architect has the opportunity to build a box-shaped structure with overhanging balconies. Residents are a mother and her adult son, so the house must meet their need for privacy and comfort, and entertainment. The landscape box provided by an excellent situation increases the value, while the collection is very personal spaces. Benefits son of a bedroom with a separate entrance, located on the ground floor, next to the playroom. Gourmet kitchen is also located on the lower floor where there are also two additional bedrooms and a service area. Balcony and terrace make the connection to fresh air and beautiful scenery. The first floor features a garage, laundry room, living room and dining room, balcony, a guest room and master bedroom.

This is a nice place to live, providing a platform for entertainment and relaxation for its residents and their guests, do not you think?

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

Food Repair Guide: Baking Part 1

Bread

Bread, being about the first thing that man made, is also about the easiest. Ordinary bread is only flour, salt, liquid and yeast, well kneaded to mix, and baked. The modern cook with a food processor need not even bother about the kneading (which is only done to spread the yeast really thoroughly through the bread) as the food processor does it all for her. Unless, of course, she enjoys doing battle with balls of dough!

Ingredients/yeast

Flours differ but, as long as the flour is of good quality and dry, the differences are a matter of personal taste. Water is the normal mixing liquid and sea salt has a better flavour than table salt.

If the yeast is fresh and alive, when put in a damp, warm atmosphere, it will rise and grow whether it is incorporated in a dough or alone. Old age kills both compressed and dried yeast, as do extremes of temperature: anything over 110°F/50°C or below standard refrigerator temperature.

Once the yeast has been creamed by mixing it with sugar and a little warm liquid, it needs only to be thoroughly amalgamated into the dough, by hand or machine.

Diet Start

Rising, etc.

After the yeast has been mixed in, the dough must be left to rise, and in some cases prove. This will happen more or less quickly depending on the ambient temperature, but the longer it takes, the better the bread will be. Elizabeth David, among others, maintains that bread that has been left for 24 hours in a moderately warm kitchen will taste far better than bread that has been ‘hurried’ in a warming oven. However, an hour should be the minimum time — unless you are using a food processor and extra vitamin C to assist the raising.

If the dough does not rise, it means that the yeast is dead — whether through old age or overheating — and there is nothing you can do about it. Dead yeast has a smell and flavour not unlike dead cats and is totally unrevivable. Throw it out and start again.

Once you have mastered the basic techniques of bread making, all fancy breads are merely an elaboration on them. Most bakery books are extremely explicit in their instructions.

Cakes

Raising agents

Most cakes use eggs or chemical raising agents rather than yeast. The lighter sponges use whisked egg white; heavier sponges or fruit cakes use whole eggs or a combination of whole eggs and baking powder or bicarbonate of soda. These work by giving off gases when heated, thereby raising the mixture. The more chemical raising agent one uses, the lighter, dryer and less keeping the cake will be. Thus, fresh light sponges or angel cakes should be eaten within 24 hours to be at their best; a rich Madeira cake will keep several weeks; a fruit cake several months.

Mixing

The early mixing processes in all cake making are important, be it beating eggs and sugar to a ribbon or creaming butter and sugar for Victoria sponges. In both cases, early and thorough beating ensures that the cake will remain moist. Beating later in the process when the flour has been added will make the cake tough, heavy and elastic. Obviously, beating a light sponge after the egg white has been folded in would defeat the purpose of the operation.

For cakes that need to hold a filling in place — such as a cherry Madeira where you are attempting to keep the cherries in suspension — do not add all the liquid until you are sure that the full amount will not make the mixture too liquid to support the fruit.

Packet mixtures

If you feel that you cannot face the traumas of total cake making, there are a great number of excellent packet cake mixes on the market and you might be well advised to give up the whole business of being a home baker and use one of them.

Cooking

Follow the instructions in the recipe (or on the packet) for baking times and temperatures but do check yourself, as your oven may not behave exactly as the instructions say it should. Do not, however, continually open and shut the oven, as you will kill whatever chance the poor thing had of rising evenly in a constant heat. Similarly, when you test it, do not be too vigorous. If a light sponge gets a fat skewer stuck in it, it will break the crust and release half the air being carefully husbanded inside. Press the sponge very gently with your finger and, if it resists, it will be done. A more robust cake will stand the skewer treatment but, even then, do not do it more than you must.

Turning out

Whether the mixture is from a packet or home-made, it is most important that you are able to get it out of the tin when it is cooked. Greasing and flouring tins should work but has been known, only too often, not to — especially if the butter was salty! Invest in one, or several, loose-bottomed cake tins, which guarantee complete success — not only for cakes but for pâtés, mousses, jellies or anything else that you fear may lurk shyly in its container and refuse to emerge in public. If the mixture is very liquid, as in a very light sponge, line the tin with greaseproof paper to prevent it leaking out the bottom.

My trip to Vietnam Cont….

I finished the organization capacity assessment of the 5 local civil society organizations (NGOs) in Vietnam. They are all working or trying to work in a “rights” based approach. The main services of these local NGOs are focused towards marginalized groups, ethnic groups etc. However this is not what the Government wants; they prefer them to work on a needs based approach.

They have therefore come up with a way to allow such organizations to work on a slightly different rights based approach. However this is a structured method which can be monitored by the Government. This is how it is set up:

All international non governmental organizations (INGOs) have to be registered with the ministry of foreign affairs under “VUFO” – Vietnam Union of Friendship Organization. VUFO is the organization which deals with the administration of INGO policy and compliance as it were. Under VUFO they have what is known as the NGO Resource Center which deals with some operational issues as well as help set up working groups under thematic areas. (E.G: HIV AIDS, Gender, LGBT etc.)

All/most (there can be exceptions) rights based local non governmental organizations are registered under “VUSTA” – Vietnam Union of Science & Technology. VUSTA is the organization which deals with the administration of local NGO policy, compliance and deals with the operational issues as well as help set up working groups for thematic areas.

Both types of working groups in theory are independent; however they can have representatives from ministries, other government agencies, communist party advocacy committee etc. in addition to like minded NGOs and INGOs.

Through these working groups research based policy alternatives (advocacy and lobby for rights based services & opportunities) are submitted to each relevant ministries. This is then passed on to the cabinet of ministers. Based on the agenda of the National Assembly cabinet may submit these policy alternatives to the assembly who may or may not approve, amend or adopt these policies. It sound quite easy but in practice this is a long process.

Many organizations do not have long term resources to sustain this type of process. However based on authority levels at different levels/branches of the government some organizations are able to get the corporation of the government to deliver right based services themselves or through quasi government agencies.

The “local NGO” in general is a relatively new phenomenon in Vietnam. They tend to be small and with low capacity. They have the potential to play a key role in delivering services to special interest groups and ethnic minorities in Vietnam. There are some clear examples where the government has allowed the use of this method effectively in isolated cases.

There is a significant difference to how international & local NGOs operate in Vietnam, Lao, Cambodia, China, Mongolia & Myanmar. They have learned to operate within the service gaps of these socialistic countries and they are beginning to get noticed for the excellent work done, by their governments and civil society in general. However, they too face some of the most common issues such as resource mobilization, retention of staff, planning, budgeting, monitoring etc. faced by NGOs the world over.

Now about Hanoi; it is indeed a busy city and one that is growing rapidly I really like visiting Hanoi and the friendliness of the people of Vietnam. I visited most of my favorite cafes and bars which I patronized on my previous travels to Hanoi. Everywhere you look you see construction sites (Except central Hanoi) these buildings are mixed developments like what you saw in Dubai several years ago. They are still to go in for developments such as Dubai Marina, Dubai International Financial District; I counted over 40 cranes on the drive from the airport to my hotel. They do not seem to be affected as much as the others in terms of the global financial crisis.

Walking through the streets of Hanoi I noticed something unique to Vietnam (I think). Most of the Hanoi streets are dotted with Café’s and restaurants. With the vast majority of the Vietnamese using motorbikes for travel, each one of the establishments have something resembling a valet parking for those patrons arriving at the establishment in their motorbikes. The parking attendants use a white chalk to mark on the seat of the motorbike the number of bikes parked in the day / rider / owner / and parking sequence. When patrons leave the parking attendants starts moving the motorbikes closer to the entrance (perhaps for tips) and it is done on a continues basis. I was fascinated by this as my experience in other parts of the world is that they put up a huge sign saying that parking is at your own risk; and they are only interested in what you spend at the establishment and keen to get you out as soon as they can so that another patron can be served. Hope this continues in the future as well.

I will be flying home tomorrow and will prepare for 3 more assignments which have simultaneous time lines. Organization Capacity Assessment of research & policy advice organization in South Asia, Organization Capacity Assessment of 5 local NGOs in Indonesia. Organization Capacity Assessment of 4 branch offices in the east of Sri Lanka.

TestRun, Quick ‘End Of The World’ Edition Answers: Does SLI Really Make A Difference? and Where Should I Put PhysX for NVIDIA Videocards? (Text-Only Version)


Update: Added more Tests and Results – Hitman: Absolution Benchmark, Unigine: Valley Benchmark, Left 4 Dead 2 Unscripted Gameplay Test, Tribes: Ascend Gameplay Test and Rollercoaster Tycoon 3: Platinum Gameplay Test


Recently becoming the proud owner of another NVIDIA card, I swapped out my trusty AMD/ATi Radeon HD 6870 from ASUS that has served me so well and lovingly joined together two GTX 560 Ti videocards in electric matrimony to try out some SLI. I share now my experiences, the results of many tests and answers to questions I have seen in many places online, including one I had myself.

This is also a ‘Quick’ Edition, a version of the testing and results that are text-only for now, where I may do a full version as time permits in the future, with screen recordings, graphs and other materials that I would like to share and would help people out.

The Experiment

For this TestRun, with two NVIDIA videocards, I try answer the question: “Does SLI really make a difference?” and also “Where to put PhysX?”. Sure, the answer of ‘if it makes a difference’ is answered other places online, with pretty graphs and numbers; but I am one of those people that, although accepting, don’t ‘truly believe’ things unless I can test it out myself. This is a human stubbornness I know, but it also helps me explore many things I would not have otherwise experienced and allows me to share those results and experiences with others. “Does it really double performance?” is probably a more specific question of what I’m feeling, as of course it should make a difference, after all I am putting another 384 processing cores towards throwing around colorful shapes on my screen. I want to know if it even ‘doubles’ the awesomeness of games that I play. There are two cards in there now, so what’s the difference in performance?

Another aspect I plan to explore is regarding PhysX, NVIDIA’s lovechild of bouncing balls and splattering sparks. Does it affect game performance? Which card should run it if I have it on? Is it better to run it on a dedicated card [that only uses it for that] or off of the CPU? These are my own questions as well since finding a second NVIDIA gpu on sale… PhysX is only in a hamfisted-handful of games – and is only going to be found on NVIDIA GPUs, but it is supposed to improve visual/perceived quality in the games that do use it, due to the fancy waving flags, shattering glass and splattering blood [and the like]. I am going to test the options of having it on the first or second SLI card and how PHysX runs off of the CPU, too.

The Test

For this TestRun, I used utilities such as FurMark and FluidMark, Unigine’s Heaven Benchmark and a handful of games to benchmark and test with, such as Just Cause 2, Alien Vs. Predator, Lost Planet 2, Battlefield 3, Unreal Tournament 3 and Batman: Arkham City (all but the first two utilize PhysX). I am currently running an AMD 6-Core CPU and two GTX560Ti’s in SLI mode on a GIGABYTE 990FXA chipset mainboard.
I assume this is still an average-to-above-average system at the time of this writing (perhaps upper midrange but definitely not top-of-the-line) and it would help out anyone with a similar rig in the future as well with examples of some of the performance difference they will see [if they add a second videocard].

The Data

Here are my benchmarking test results and average framerates, comparing SLI mode with a single GPU:

FurMark: Score (2127), Average Framerate (40fps)
FurMark: Score (3959), Average Framerate (65fps) SLI
Lost Planet 2 – Benchmark B: Average Framerate (44fps)
Lost Planet 2 – Benchmark B: Average Framerate (103fps) SLI
Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (28fps)
Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (51fps) SLI
Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (44fps)
Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (90fps) SLI
Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (960), Average Framerate (38fps)
Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (1717), Average Framerate (68fps) SLI

Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1077), Average Framerate (26fps)
Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1741), Average Framerate (42fps) SLI
Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (32fps)
Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (33fps) SLI
(Hitman: Absolution does not appear to take advantage of SLI and/or is not Optimized for it, despite double-checking that SLI mode is enabled and trying to utilize NVIDIA’s ‘Custom Game Profile’ for it, as well – the following two games also do not appear to take advantage of SLI mode)

Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (51fps)
Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (53fps) SLI
Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (17fps)
Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (19fps) SLI




Here are some unscripted, raw gameplay framerates, averaged:
(multiple samples taken of each with FRAPS’ built-in benchmarking utility)

Alien Vs. Predator: Marine Storyline, Average Framerate (47fps)
Alien Vs. Predator: Marine Storyline, Average Framerate (89fps) SLI
Battlefield 3 : Multiplayer with 64 Players, Average Framerate (33fps)
Battlefield 3 : Multiplayer with 64 Players, Average Framerate (61fps) SLI

Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (128fps)
Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (185fps) SLI

*Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (36fps)
*Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (37fps) SLI
[*Game does not appear to be fully optimized currently, article with more detail here:
http://gametipsandmore.blogspot.ca/2012/11/planetside-2-and-ultra-settings-quality.html)


Here are the PhysX tests, done with FluidMark:

FluidMark: Score (5338) single-card mode, PhysX on the card, Average Framerate (87fps)
FluidMark: Score (5449) SLI, PhysX set to (GPU1), Average Framerate (89fps)
FluidMark: Score (7512) SLI, PhysX auto-selected (GPU2), Average Framerate (123fps)
FluidMark: Score (7379) SLI, PhysX set on (GPU2) Dedicated, Average Framerate (121fps)
FluidMark: Score (1291) SLI, PhysX set on (CPU), Average Framerate (21fps)

The Conclusion

So, does putting in a second videocard practically ‘double’ your gaming performance? Dang right it does. Now, I have read that it ‘should’ in many other articles online, but again, I had to test it out for myself. Almost across the board, in every game I threw at it, the performance was almost doubled. Wonderful stuff.

For those about to spend money on a second GPU for SLI because now they know it ‘will definitely make a difference’, I should mention as a Tip here that the more cards you add in (for 3-way or 4x SLI or Crossfire, for instance) the lower the rate-of-return you actually get on the investment.
In other words, adding a third card won’t ‘double the performance again‘ and adding a fourth card won’t ‘double that performance yet again’ –  it won’t even give you 300% and 400% performance [for the third and fourth videocards added]. You will actually see diminishing returns as you add more cards.
Still, if you have enough money for only a second GPU that matches your ‘old’ one, but not enough money to splurge on a new, faster one, clearly SLI/Crossfire is the way to go, it really does make a huge difference.

The PhysX tests are interesting, as they answer a question that I myself was wondering: does it matter whether you set PhysX on GPU1, GPU2 or the CPU, and should a GPU be dedicated to it?

It seems to make sense, that although a powerful, complex 6-core processor, my CPU is nowhere near the raw number-crunching [if ‘simpler’] streamlined data-geyser that the 384-core video card is. The difference can be clearly seen in the results. On the CPU, PhysX calculations [alone/isolated] gave a 23fps output of gushing blood on the screen, while even just one videocard running PhysX by itself put out 87fps of crimson data. Adding another card and telling that GPU instead [of utilizing the first card] to ‘calculate the physics if you please’ took the framerate up to over 120fps. Clearly, NVIDIA is showing that the videocards were made to handle the floating leaves, sparks and bouncing balls of PhysX …and ball handle they did.

What is interesting is the difference that was made, depending on which card you chose to handle PhysX. When the PhysX was set to GPU2 (the card not plugged directly into the monitor in my case), the highest score was achieved. When the PhysX was set to GPU1 (the card plugged directly into the monitor), it scored almost exactly the same as if there was no second card in the system at all. Now, the utility (FluidMark) does test ‘only‘ PhysX and there isn’t much to see on the screen other than some bouncing baubles, but it seems to show that if you put PhysX on the same card that you are using as your display card (that your monitor plugs into), then it might in fact affect performance of that card to display the pretty images on your screen slightly – or at least, to ‘deal with PhysX and show pretty colors on your screen’ at the same time.

Either way, they are both better than utilizing the CPU, as the pitiful performance when on the CPU (at least for ‘mainly PhysX only’ calculations) is over 500% slower than the performance seen when PhysX calculations are put on the second video card, and still calculated at over 400% slower compared to when PhysX is put on the first video card in an SLI setup. Clearly it is better to have PhysX calculations done on a GPU – and perhaps not put it on the main display card if you can.

Testing the ramification of this in actual gameplay, I played some Unreal Tournament 3 and Batman: Arkham City, while juggling the PhysX of both games to be calculated on the CPU, GPU2 and GPU1 (the main display card where the monitor is plugged in). Using FRAPS for collecting benchmark data in Average Frames Per Second, I saw no more than a few frames difference between all modes.
That is, playing with PhysX set to GPU2, PhysX set on GPU1 or putting the PhysX onto the CPU, I saw only a few frames of difference in actual gameplay performance. Mind you, it can be argued that I didn’t see as many sparks, blood, snow or leaves float across my screen at times; but overall, if you are concerned with only “the game performance ramifications” of where to put PhysX, The Answer Is: playing a game, it doesn’t really matter (but the CPU calculates PhysX slower than putting it on any card, as seen in the data).

Overall, if you can’t afford that fast, newly-released videocard you want, but you can afford to get another GPU of the same type as the one you have now – and your motherboard and powersupply can support it – it’s totally worth it to get a second videocard for SLI/Crossfire performance (and if you’re going the NVIDIA route, it doesn’t really matter where you put PhysX).

Have fun upgrading and See You In The Games If The World Doesn’t End Soon!

And More: “An Internal Error Occurred When Overlapped Buffer Is Full” in VideoStudio X10 [Error Workaround]

[This post is currently Text-Only for speed of Posting. I may return and add example Screenshots and more, Soon™]


Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue

Go to “Update 2017-05-02


Just a quick bit of information, for those using Corel’s VideoStudio X10 to edit and render their video projects and running into this error…

I was working on trying to finish some of the many, many, many projects I have in various stages of completion, and ran into an odd error when trying to render a Project in VideoStudio X10. The error said only:


“An Internal Error Occurred When Overlapped Buffer Is Full”


This is somewhat odd, as this is more of a generic Windows Application error than it is a VS (VideoStudio) error. So, I went to the Official Corel Support Forums and did other online searching…






I found a lot of people who have experienced this error, but none that had any solutions, sadly.
So, it was Time To Go Troubleshooting! /maskandcape

Now initially, I was trying to render in 1080p using the more common MPEG-4 Part 10 (h.264/AVC) format. VSx10 offers GPU-acceleration (where it utilizes the power of the videocard), like many video editing programs do these days, to help render and compress the output – and the quality of MPEG-4 can be quite good for the size, when it comes to compression.

BOOM, the error pops up, interrupting the rendering process.
Okay, time to see what could be causing it.

First, I tried to render in the other Formats that VSx10 offered (MPEG2, WMV, etc) and nothing would finish rendering without this error – except for Windows Media Video format (WMV).

Since WMV does not require GPU-acceleration to render, I disabled all GPU-powered optimization in the Preferences of the application (disabling ‘hardware acceleration’ where I could). I was hoping this would render with other formats without acceleration (MPEG-4 does not ‘require’ hardware acceleration, for example, but it renders much faster with it). Still, the error came up in any other format than WMV…

So, to dig in a bit of a different hole than the WMV format to find answers, I took out all elements of the Project except for the first video files (taking out the audio files, the Text added, images, etc) and tried to render again. It worked!

I then added in the Text elements (made with Corel’s built-in Title tools). It worked!

Since it worked with Text and all video files now, I added in the Audio Files.

BOOM, the error popped up again.
That’s okay, it’s progress – now we know that something related to the Audio is having troubles.

I was looking at the Audio Files and noticed that I had some ‘Audio Filters’ and ‘Speed/Time-Lapse’ adjustments on them (to help them synchronize somewhat in the Project), so I took those effects out and tried to render again. It worked!

Okay, so since it works with the Audio Files present – without ‘FX’ on them – then it might have something to do with the Filtering/effects…
I enabled only the Speed/Time-Lapse adjustments and left out the Audio Filters for the Audio Files that utilized them. It worked!
I then enabled the Audio Filters again and BOOM, the error reared up and roared in my face.

So, it appears that there may be something with the Audio Filters in VideoStudio that does not play nicely when you go to render the Project (for those experiencing this problem..). Nothing but WMV would produce output for me, at the time of this posting (this is with VideoStudio X10 Service Pack 1).


My advice then, is to try to utilize audio files that do not require Audio Filters in VSx10, for now (until the source of this problem is fixed in full).


If you must apply some sort of affects or filtering, there are many audio editing tools out there that can be used, at least until this gets looked at/fixed someday. Some suggestions off the top of my head are:

  • Sony’s Sound Forge (recently acquired by MAGIX, I think).
    This is a pretty capable application, with lots of effects, pitch shifting, fading and filtering available – I have used it a lot in the past when it was run by Sony. It costs some money, however.
  • Audacity.
    This is a free (Open Source) audio editing application that is popular and has many of the features and filters that Sound Forge has – I have used this too, before I could afford to buy any editors at all.
  • Adobe Audition.
    Adobe acquired the older-but-popular Cool Edit Pro audio editing program, which I personally used to use and like. I have not used it since Adobe took over, so I cannot vouch for how this one is – I assume that it is similar to how CEP was – which was quite capable. It is not free, however.


For now then, I will bring this up with Corel Support and see what they have to say about it – until this gets ‘fixed’, avoid utilizing Audio Filters in VideoStudio, if you can – for now…


Hopefully this information will be of use to those who, like me, were running into this annoying error in an otherwise decent video editing application – and hopefully it gets fixed soon!


If I remember, I will come back and Update this Post when a ‘Fix’ has been released!



Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue with Corel’s VideoStudio x10 and how it handles some Audio formats (sample rate / bit depth). I am in contact with Corel Support at this time via e-mail, discussing this issue.




Here is what I have found after further testing:


I did some further testing on the audio files, looking at their specific properties. 
I found that the files giving this error were in 24bit depth, 96000Hz format. 

Just to experiment/investigate, I converted the audio file to 16bit depth, 44000Hz format (Standard Compact Disc Audio WAVeform format) and it worked! 

Here is what I found then, during more testing on the bit depth:

– 16bit audio file = Audio Filters and Speed Adjustment can both be used at the same time
– 24bit audio file = Only one or the other can be used at a time

Both Audio Filter and Speed Adjustment added = Error with 24bit audio file at 96000Hz sample rate
(I found that the 24bit depth audio files were also 96000Hz..)

Testing 24bit audio files at 44000Hz resulted in NO ERROR = it worked
(when using both an Audio Filter and a Speed Adjustment at the same time)

The error was repeatable however, with a 96kHz 24bit audio source file (having both a ‘trouble’ Audio Filter (one of those three listed above) and a Speed Adjustment on it).

Although this is not a ‘game breaking’ issue (I personally don’t mind converting any of my 24bit audio source files that are at 96kHz into 16bit depth versions but it is more work), this may be an issue for more novice users, who may not know how to do so. 
[Hmm, maybe I will make a Quick Tip on this, to help those people out…]

Related to this, many commercially available Samples (sound source files) are distributed to the customer as 24bit audio files, for higher fidelity. 
(Example: I purchased Sample Packs from Sony Creative Software and they came in a bundle as 24bit audio files. Another purchased Pack from BigFishAudio also had the source files being delivered as 24bit sources)
If any of those are at 96kHz (I see that most are at 44kHz anyway…), then it may bring up this issue. 

I realize too that it may be my machine, or my specific combination of hardware, interacting (CPU/Sound/etc) and also there does not seem to be many 96kHz 24bit audio files floating around in general usage (from what little I have seen, perhaps there are, but as I stated above, commercially-purchased packs seem to come in 44kHz 24bit format, at most).

Although this is not a ‘Fix’ directly dear readers, hopefully this information can help you VideoStudio users to avoid it, ‘stepping around it’ at least, for now – and perhaps this testing and information can even be utilized improve VideoStudio for the future… (I am in contact with their Support now, discussing these occurrences).






[Note: I am not affiliated with Corel or any of the other companies mentioned herein. I have not and I will not receive any compensation of any kind, for mentioning VideoStudio here. I am merely a user of the product and have used many of the other products mentioned above, including other video editing programs, not omitting Open Source / Free applications. I simply share information I have discovered, in hopes that it will help others.]

Beautiful Bed Room Design Sample

Beautiful Bed Room DesignBeautiful Bed Room Design

Beautiful Bed Room Design MinimalistBeautiful Bed Room Design Minimalist


Beautiful Bed Room Design ElegantBeautiful Bed Room Design Elegant


The hottest color of 2010 is Beautiful Bed Room Design which is a strong color that must be used as a complement with lighter tones so as to not overwhelm the space and to make it look classy and fun.In the pictures above you can see a beautiful turquoise interior starting with the chandelier and ending with pillows.It’s a good combination between turquoise and floral tapet from walls.

9 Benefits of Orange Jasmine for Health and Beauty

9 BENEFITS OF ORANGE JASMINE FOR HEALTH AND BEAUTY

9 Benefitsof Orange Jasminefor Health and BeautyOrange jasmine (Murraya paniculata L.) usually grows wild on the edge of the forest, in the undergrowth, and guardrail garden and planted as an ornamental plant in the yard. Such as ylang and jasmine flowers, yellow flowers are also often used for traditional medicine. Parts of plants that can be used is the leaves, twigs and roots. Skins and stems are also useful for medicine.
Leaves and twigs are useful in overcoming inflammation of the testicles (orchitis), could also overcome inflammation of the airways (bronchitis), urinary tract infections, gonorrhea, vaginal discharge, and come irregular menstruation, body fat overload, and slimming the body, pain ulcer (ulcer), dental pain and soften the skin.
9 Benefits of Orange Jasmine for Health and Beauty - 1
Its roots are also useful for treating bruises caused by collision or hit, rheumatic pain, sprains and insect bites and poisonous snakes, boils, eczema and scabies. While the bark is also useful to overcome tooth pain, pain due to open sores in the skin or mucous membranes (ulcers).
1. Can Smooth Skin
Yellow leaves are still fresh as much as 30 g washed and then pounded until creamed. Add 1 cup of water was while in the mix with the average. The material is then scrub the skin before bedtime.
2. Can Smooth Menstruation
Yellow leaves and leaves of henna (Lawsonia inermis) each fresh ingredients as many handheld ½, 1 finger rhizome of ginger leaves, washed and cut into pieces as needed. Add 3 cups water was then boiled until the remaining 1 cup water. After the cold filtered water, then drink 2 times a day, each ½ cup.
3. Treating Urinary Tract Infections
Yellow leaves are still fresh as much as 35 g washed and then add 3 cups water. Boil until the water remaining half. After all cold filtered and taken 3 times a day, each is ½ cup.
4. Inflammation of the Testicles
Provide 9 sheets of yellow leaves are still fresh as much as 60 g and bitter herbs as much as 35 g washed and then boiled in 3 cups water until the remaining 1 cup water. Once everything is cold filtered, then taken 2 times a day, each ½ cup. Do it every day until cured.
9 Benefits of Orange Jasmine for Health and Beauty - 2
5. Can Slimming Body
Yellow leaves are still fresh and the leaves of noni (Morinda citrifolia) each and a total of a handful of Intersection dribbles too much as half a little finger until finely ground. Add 1 cup cooking water, stirring until evenly distributed. Wring with a piece of cloth. Water that is collected while drunk in the morning before eating.
6. Can Treat Toothache
Oil that comes out of the bark of yellow flowers are already burned dripped on the hollow.
7. Can Treat Arthritic Joints
Orange Jasmine root and root (Lantana camara) washed, then add 3 pairs of chicken legs. And all the ingredients are cut into pieces as needed and then add enough water to be submerged. All the ingredients are then cooked. Once cooked and the water is drunk warm.
8. Can Heal Bruises
Orange Jasmine and glass plate, respectively, and the fresh leaves, the same lots, washed and then finely ground. Add some wine while stirring on a fire. Then Warm taped at the bruised body.
9. Can Treat Boils
Dried yellow root that is as much as 30 g washed and cut into pieces as needed. Boil 3 cups of water until the water boiled only the remaining l glasses. Once cool then filtered then drink. In day 2 times, each ½ cup.

Okay, that was it some yellow flowers benefits as a traditional medicine to cure various diseases. Hopefully article 9 Benefits of Orange Jasminefor Health and Beautycan we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
How Shoes May be Impacting Your Health
Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
The Health Benefits of Grounding
Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
So have some fun, kick your shoes off and get back to nature!
How to get the benefits of Grounding
Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

WORKOUT ANYTIME on WYFF Greenville

WORKOUT ANYTIME on WYFF Greenville

Jennifer Young and Laura Stokes of WORKOUT ANYTIME Easley were recently featured on two segments on WYFF Greenville. The segments focus on easy holiday workout tips, and Jennifer and Laura do a fantastic job talking about the different services and facilities offered at WORKOUT ANYTIME
View the segments here and here. 

Fast DietaryTrack rules

During this first two weeks you need to:

  • Eat about 150g (5oz) of protein per day, which should come from a portion about the size of your palm at each meal, plus two all-protein snacks per day.
  • Eat around 20g of carbohydrates per day. A simple way to work this out is to use a set of measuring cups (a cup holds 250m1/8 fl oz). You should aim to eat approximately 3 cups of low GI vegetables or 2 cups of low GI vegetables and 1/2cup low GI fruit — at least half of which should be eaten raw.
  • Get 30 per cent of your daily calorific intake from fats, which may include: olive oil, walnut oil, grapeseed oil, coconut oil, homemade mayonnaise, flaxseed oil, small amounts of butter, small amounts of sour cream
  • Drink 8-10 glasses of water daily; you can also drink herbal teas, but avoid alcohol, soft drinks, tea and coffee, because caffeine interferes with ketosis
  • Avoid artificial sweeteners, which can stimulate insulin secretion
  • Rev up your protein levels by including at least one whey-protein drink per day
  • Eat enough — otherwise you may start to burn muscle tissue
  • Avoid starchy, carbohydrate-heavy foods such as pasta, bread and potatoes
  • Beware of hidden carbohydrates in sauces and dressings
  • Check the labels of all foodstuffs and avoid all processed foods
  • Not give up!

Diet Start

Dietary Q&A

Q. I have been restricting my carbohydrate intake for days now and I have no energy. I thought this plan was supposed to make me feel better, not worse.

A. Your body is adapting to the metabolic conversion of burning fat for energy instead of glucose. This takes about three days in most people, which is why it is usually best to start the diet over a weekend when you are able to relax more. After three days you should see a rise in your energy levels, but if you continue to feel lethargic or unwell, stop the plan and check with your doctor.

Q. Will I get enough fibre on this plan?

A. Fibre is provided by the inclusion of fibrous vegetables and fruit, and is increased if you eat most of these raw. However, if you experience constipation during the initial stages, try adding psyllium husks or psyllium- husk powder to your whey smoothies, because they comprise 100 per cent soluble fibre. Psyllium husks are pure dietary fibre, composed mostly of cellulose. They swell when they come into contact with water and release

a gelatinous mass (mucilage) which passes through the colon and aids easy elimination.

Q. Why does a lowcarbohydrate diet cause bad breath?

A. When you are on the Fast-Track Plan and restricting your carbohydrates to around 20g (3/40z) per day, you will be burning ketones, which may cause your breath to smell a little unpleasant. Don’t worry, this is easily masked by chewing parsley-oil capsules or by using a natural breath-freshener spray. Make sure that you drink plenty of water because this will help to neutralize the odour.

a friendly stopped by to say hello, at 5000 feet

The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

Spotted in a hoarders driverway

the front yard was covered in a variety of junk.

Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

Immune Complex Food Sensitivity

These occur when antibodies attack allergens but don’t manage to kill them. The result is an allergen (called an antigen) with an antibody stuck to it. This creates a whole new animal (an antigen-antibody complex) that the body doesn’t recognize. When this happens, the ‘new animal’ starts circulating around the body, and this circulatory immune complex, or CIC, can eventually lodge in tissue.

CICs create many of the same reactions as classic allergies. When they circulate through or lodge in tissues, such as those of the kidneys, lungs, liver, or joints, they can cause terrible problems by starting immune and inflammatory responses. They can cause joint problems similar to arthritis, and they can cause organs to malfunction. They often interfere with the body’s filtering mechanisms, such as the lymphatic system and kidneys. Some researchers believe they contribute to many types of kidney disease, some of which are eventually fatal.

Diet Start

Sometimes, people with serious CIC problems experience widespread conditions — such as migraines, kidney problems, and joint pain — and never realize that all of these problems have a single cause.

Frequently, patients come to me hoping only to lose weight, but when they resolve problems such as excessive CIC production, they also overcome other serious health conditions. One recent patient, for example, not only lost 22 pounds but also recovered from chronic joint pain, migraines, and gallbladder inflammation. This patient was happy to lose her weight, but was overjoyed to solve the other problems. Of course she had to make a serious commitment to her health and change her lifestyle. But she enjoyed the whole process, because she felt so much better every step of the way.

This reinforced my belief in the adage, ‘If you just strive for thin, you’ll never win. Strive for health, and thin will follow.’

Now you know about the risk factors that make you vulnerable to food reactions, and you know how food reactions work. Good for you! You now have more knowledge about this subject than many doctors do.

Now that you have a good foundation of knowledge, you’ll be able to understand why food reactions cause bloating and swelling. Once you understand this, you need never again be a victim of false fat.

RELAXING BATHROOM MODERN DECORATION

Relaxation can be achieved in a variety of ways. If the shape of the tub that makes the difference, decorative items or inspire the idea that you can see, these bathrooms all have something in common with relaxation. Some interiors are rich in green arrangements, which add freshness and energy of the place. He also tried to find some bathroom designs that have a special color.

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM DESIGN

We realized that the wood has a great influence on modern decoration, the first picture, for example, because it adds authenticity and personality. The windows are also of great importance because they have a great influence on the aesthetics and atmosphere of a room. Diagonal windows give a dramatic touch and are welcome if there is a nearby slope. Most of the bathrooms in the following images are modern, but also you will find some classic elements that blend well with contemporary arrangements.

LUXURY RELAXING BATHROOM LUXURY DESIGN

RELAXING BATHROOM LUXURY DESIGN

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM GREEN DESIGN

LUXURY RELAXING BATHROOM GREEN DESIGN

LUXURY RELAXING BATHROOM STYLE

LUXURY RELAXING BATHROOM STYLE

It’s Not Just You™ – Battle.Net Issues with Logging In Today [Notification]

Just a quick post to let others know that if you are having logging in to Battle.Net today (August 1st) that lots of people have been having problems as of this morning. Blizzard has addressed this with a quick note via their twitter, seen at:

https://twitter.com/BlizzardCS/status/760100687111938048

Retry or Go Back To Bed? Hmmm….

For those playing Blizzard/Battle.Net games this weekend, hopefully it will be up soon – just letting you know, It’s Not Just You™ !

HOW TO DECORATE A KITCHEN MINIMALIST

A café is a place where people meet, talk and relax. The ambience of a café is loved by many people and that is why many of them visit one daily after work so that they can talk and share things with their friends and relax after the long day. One can decorate their kitchen with a café theme so that they have a coffee shop at home, or they feel the same. Creating the same theme as that of a coffee shop is a brilliant idea to add a different touch to the kitchen and make it nice and cozy also.

Minimalist Decorate a KitchenMinimalist Decorate a Kitchen

Decorating the kitchen with a café theme is not at all difficult or expensive as many would think it to be. People have two options when they want to incorporate a café theme; they can either completely change everything in the kitchen or they can use what is there, and use it and still create the theme. The things that one can use along with the colors and the final touches, is what matters the most.

A basic thing that one can add to the kitchen which will be useful also and will also help to create the café theme is to use a table with four chairs in the space. The chairs should be comfortable and for this one can add cushions to it. The table should not be crowded with too many things and under table you can opt for a modern carpet or rug.There are several types of these rugs you can get including wool area rugs, contemporary rugs and even discount area rugs that you can find online.The other thing that one can do easily is to paint the walls of a different color. The color should be bright and be chosen keeping in mind the natural light that comes in the kitchen.

Near the table that one keeps in the kitchen, one can place a book shelf and place some nice coffee table books or books of art and poetry. Another thing that can be done to create the café theme is that one should only be able to see things related to a coffee shop in the kitchen. The table should only have sugar and coffee beans etc, the counters should only have the appliances that are used in a coffee shop like the blender or the coffee maker. It is not that the kitchen cannot have other useful appliances; all that one needs to take care of is that these should be kept in the cupboards and should not be seen as this can ruin the café theme that one wants to create.

the 2018 La Jolla Concours Best of Show award was presented to the Mullin Automotive Museum for their 1939 Bugatti Type 57SC Aravis Cabriolet.

The Mullin Museum is a must see, they have an incredible collection of Bugatti. Probably the 2nd best collection you will ever be able to see, and probably the only Bugatti collection in the USA available to the public.

http://justacarguy.blogspot.com/2012/01/mullin-museum-what-it-looked-like-from.html  for a quick look

http://justacarguy.blogspot.com/search/label/Mullin%20Museum  for all the galleries from when I was there in 2012

and for a more thorough gallery of this car http://justacarguy.blogspot.com/2011/12/beautiful-bugattis-from-mullin-museum.html  and that’s why I didn’t take another set of photos… there isn’t much reason to look at two sets of the same car.

good representation of the concepts

WORKOUT ANYTIME on CNN Money

WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

What’s next for Blockbuster’s empty stores
By: Patrick deHahn

Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

(Read More)

My Trip to Male, Maldives, September 2010

The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

View of Water Villas.

View of Maldives by Air (Sea Plane)

Not only did I snorkel but I also went on the “Whale Submarine”

As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

Cellulite Breakdown and Essential Detoxification part 1

Waist Disposal

`Excess fat is nothing less than a poison depot in an over-acid organism.’ These words were uttered half a century ago by Danish physician Kristine Nolfi — an expert in healing the body through diet. They lie at the core of the cellulite phenomenon. One of your body’s most effective ecological mechanisms for protecting itself from excessive poisons taken in through food, air and water or produced from within as a by-product of metabolism is to lock these toxic materials into fat cells. In the case of cellulite this natural protective mechanism goes one stage further — encasing these wastes in the interstitial fluids and ground substance by binding them within hardened connective tissue. There they sit year after year producing jodhpur thighs.

Diet Start

Personal Energy Crisis

This whole self-protective process is perfectly normal and, all in all, functions rather well, except for two things. First, in the presence of a high level of female hormones it tends to turn intocellulite. Second, it tends to deplete your energy — not only on a cellular level so metabolic processes don’t function in an optimal way but overall so you are prone to fatigue and need stimulants such as coffee to get you going and to keep you going. For in any body which has a high level of waste stored in its cells, much of the available energy is channelled into trying to cope with these wastes instead of being used to keep metabolic processes functioning at a high level of efficiency. In broad terms you sense a lack of overall vitality and over the years develop a tendency to become chronically tired — sometimes so much so that it can even become very difficult to make the effort to help yourself. To shed cellulite you need first to help your body detoxify itself and eliminate the pockets of static tissues where, like stagnant ponds in a meadow, toxicity has been allowed to accumulate.

A lot has been written in recent years about detoxification. Some of it can sound quite mystifying. But the whole process is really quite simple. The reason you have built up these pockets of wastes is simply that your body is continually having to cope with more poisons than it can eliminate in the normal day- to-day course of events. Remove some of the burden of what is creating this excess toxicity in your system by laying aside coffee, alcohol and over-processed foods complete with chemical additives for a time, and you are halfway there. Add to that a very simple and temporary regime designed to trigger rapid detoxification, some movement and some external help, and quite naturally you trigger your body’s own mechanisms for clearing out the junk. This is the first step in the Cellulite Revolution. There are lots of ways you can do it but the simplest of all to begin with is to go on a two-or-three-day applefast.

Applemagic

The apple has long been valued as health tonic, medicine, cosmetic and bowel-regulator all in one. Apples are low in acidity to help balance stored bodily wastes which tend to be acidic. They stimulate the flow of saliva in the mouth and clear away debris from the teeth. Eating raw fresh apples stimulates circulation in the gums too. In folk medicine the apple was traditionally used for eliminating obesity (in part no doubt because of its detoxifying ability) as well as for the treatment of skin problems, bladder inflammation, anaemia, insomnia, intestinal parasites and even bad breath. In recent years we have come to appreciate the kind of fibre apples contain. In addition to cellulose (the most common variety of fibre such as that in bran which binds water and increases faecal bulk), apples are also rich in pectin — a special form of fibre with exceptional detoxification properties. Unlike cellulose, pectin does not bind water. It is water-soluble. Pectin has no influence on faecal bulking, but it can be an excellent substance to help lower cholesterol and for eliminating bile acids from the intestines. Also, and in many ways most important of all for keeping cellulite away, pectin is a natural chelating agent for binding dangerous heavy metals in the body such as aluminium, cadmium, mercury and lead, and eliminating them.

My trip to Wadduwa

I just returned home after a 3 day South Asian Regional Workshop on Resource Mobilization. It was a good workshop as it took RM strategies to the next level and looked at operationalizing them. As Strategic Planning / Organization Development consultants we often highlight the strategy for resource mobilization; be it venture capital, angel fund or gearing in the private sector to institutional fund raising and linking with CSR in the development sector.

What was most interesting was the cases we went through, and going through a logical process which led to ones resource mobilization strategy. The workshop was facilitated by a retired general from the Indian army and he was a good facilitator who kept the attention of a group of 50 people for 3 days. It is important that we as consultants keep up with new trends as well as take time out to reflect on our ability to continually add value to our clients by increasing our body of knowledge.

We also learned of new ideas and trends in the field of resource mobilization and were very useful given the current global economic situation. Looking forward to taking the learning’s to my clients in the near future.

I also got a very small project in the financial services industry while I was at the workshop. It is from an old client who has the habit of not giving me too much lead time for projects: there goes my week end. So I am going straight to facilitating a strategy workshop in the financial industry over the weekend.

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

Hülsta German Furniture Maker showed some really incredible ideas of life that may be adopted by the style-conscious people who want to give their house a futuristic look and ergonomic. The perfect blend of stylish design with bright pink and black give the whole to create a very refreshing, but a look of the space age. The leather was added to an authentic touch and royal with a minimalist effect adding to the “cool factor”. You can either go all black look metallic or deliberately throwing red and white, while maintaining the class and elegance.

LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

Essential fats

If you have been doggedly avoiding fat in an attempt to lose weight — this approach is WRONG. You need fats in your diet. Your brain consists mostly of fat, and your intelligence, heartbeat and muscular movements all depend on it. The only way in which your body can send electrical messages through living tissue is via your nerve cells and their connectors, which again are made of fat.

The fact is that some fats (known as lipids) are essential. They act as the second energy reserve behind glycogen, providing most of their energy at around 70 per cent of maximum heart rate. Endurance athletes utilize fat as an energy source more than other sports people and this is why they tend to be lean.

Fats are not just for energy, though. Their many other functions include insulating important organs, carrying fat-soluble vitamins and regulating hormone levels. If you’re a female athlete and you experience a loss of your periods, this may be due to extremely low body fat, for this plays a vital role in the activation of the female hormone oestrogen.

Fats also contribute to health in many other ways — provided they are of the right kind. In an attempt to warn people about the risk of consuming toomuch fat, certain groups have created the impression that all fats are bad, but this simply is not true.

Diet Start

Are you eating the wrong fats?

Many people in the Western world are getting 45 per cent of their calorific intake from fats, but these are junk fats that the body cannot use, so these people are just as fat-deficient as those on extremely low-fat regimes.

THERE ARE TWO MAIN TYPES OF NATURAL FATS:

1. Saturated fats come primarily from animal sources such as meat and dairy products, and from coconut and palm-kernel oil; they are solid at room temperature. They provide the body with a stored form of energy in fat cells.

2. Unsaturated fats are found in vegetables, nuts, grains and seeds, and in fish and game; they are liquid at room temperature. They contain two fatty acids that are essential to life and, more importantly, that the body cannot produce itself. These are linoleic acid (omega-6) and linolenic acid (omega-3) From these two ‘essential fatty acids‘ your body can make all the other fatty acids it needs.

Is it just a case of cutting out saturated fat?

Saturated fat gets a bad press, and a diet too heavy in it has been closely linked to cardiovascular disease. However, there is another fat with an equal capacity to harm: hydrogenated fat.

Hydrogenated fat is solid or semi-solid at room temperature (the best example being margarine). It is created when a liquid oil (such as corn oil) has hydrogen added to it, changing its chemical structure. This in turn can interfere with the metabolism of some essential fatty acids. Research has shown that the trans fats in hydrogenated fats can increase LDL (poor) cholesterol,decrease HDL (good) cholesterol and thus raise the risk of coronary heart disease. Hydrogenated fat is found in almost all processed foods, plus frozen convenience foods and deep-fried fast food. This is another good reason to say goodbye to junk food and hello to fresh produce.

If you usually ingest high amounts of processed fats and use commercially altered oils for cooking, then you are certainly not getting the balance of fats that your body needs.

Why don’t food manufacturers use healthier oils?

Even though the food industry uses vegetable oils that contain a reasonable amount of omega-6 fatty acids, they avoid omega-3s because these are more susceptible to oxidization — in other words, they go rancid quickly and don’t have a long shelf life.

Ironic, isn’t it? Food manufacturers quite happily promote food under the guise of lowering cholesterol and reducing heart disease, but they are ignoring one of the fats essential to health. So unless you are eating high amounts of fish, fish oils, leafy vegetables, nuts, unrefined olive oil, tofu or flaxseed oil, your ratio of omega-6 to omega-3 fats is probably screwed up, and this in turn will be screwing up your health.

The current Western diet is much higher in omega-6 fatty acids than omega-3’s. Remember those healthy Palaeolithic people we were discussing earlier? They were eating equal amounts of both.

How is this relevant to body weight?

If you are eating a diet with a good balance of omega-6 and omega-3 fatty acids, this will affect your body in beneficial fat-burning ways:

  • Your metabolic rate will be increased, as will the metabolism of fats, so more stored fat will be burned for energy
  • Your cells’ sensitivity to insulin will be increased, so that it regulates blood- sugar levels more effectively
  • The ratio of insulin to glucagons will improve, which will unlock the fat- storage banks and again allow fat to be burned as energy
  • Natural appetite suppressants will kick in.

So if you want to improve your chances of losing weight, you need to up your intake of omega-3 and other healthy fats.

Essential fats Q&A

Q. How often should I eat oily fish per week if I want to consume enough omega-3 fatty acids?

A. You should aim to eat oily fish a minimum of 2-3 times per week, or ensure you use flaxseed oil regularly on salads to raise your levels. Try to eat fish from as safe a source as possible as many coldwater fish are contaminated with heavy metals and pesticides.

Q. How can I avoid hydrogenated fat?

A. Cut out processed food and only use cold-pressed un-refined oils such as olive oil, or coconut oil for cooking. Don’t eat fast food that has been deep-fried and avoid butter type spreads. If you did this, then you should be able to avoid consuming dangerous trans fatty acids.

Speedrun – Hitman: Absolution – Contracts (The First Hit)

After playing through the first Contract (“The First Hit”) properly, I noticed that the only requirements were to kill the target. It didn’t seem to matter if you got spotted or anything else, so I thought – that would be perfect for a Speedrun!

Level: Hitman (Absolution) – Contracts (The First Hit)
Time: 21 seconds
Score: 95,186
Runs: About 4-5

After a couple runs of seeing what the fastest path might be (leaping over the log takes more time than running around imo), I changed to a smaller resolution and turned the graphics down to low settings to help with speed. I don’t know if this is the fastest possible route, I just found it worked well instinctively after a few runs.

Bandicam seems to have some trouble with H:A, the fps keeps popping through, and seems to lag it out a bit. I even tried disabling SLI. I thought it might be my NVIDIA cards, and in the end, I ended up running it on an AMD/ATi HD 6870 even smoother than dual GTX 560Ti’s (this game prefers AMD videocards).

Good luck with it and See You In The Games!

Raptr – Closing Down This September 30th, The Blog Here Says ‘Goodbye Old Friend’ To The Once-Useful Program


Just a notification that the ‘Graphic-Configurator, Game-Installer, Gameplay-Recorder and
Social Media client that tried to tie it all together’ – Raptr – will be no more, as of September 30th, 2017

A few days ago, I received an email stating that Raptr was ending the program/client which at one time was tied-in with AMD’s Graphic Drivers as “AMD Gaming Evolved”. Now that both NVIDIA and AMD have their own ‘game configuration utilities’ and ‘game recording capabilities’ (via Crimson for AMD and GeForce Experience for NVIDIA), “there is no need for such a separate utility”, as Raptr’s ‘Farewell Letter’ basically states:

“We are sad to announce that we will be closing Raptr on September 30th, 2017. We want to start by thanking you for your support over the past 10 years.

The world is different today than when we first launched Raptr. Many companies offer game optimization tools. Having an independent platform to do this is no longer necessary.

On September 30, we will start the process of shutting off access to your Raptr account and disabling features. If you’d like to export your tracked game play history, you can do so immediately using the instructions below:

  • Go to Raptr.com
  • Sign in to your Raptr account
  • Click to get your gameplay data

If you have any other questions, please send us feedback.

We are proud of the service we built and the community who helped grow Raptr.  Thank you, once again, for your support.

Dennis “Thresh” Fong
Co-founder and CEO”


Mr. Fong Qin, known worldwide as “‘Thresh’ Fong” for his 1990’s Quake and Doom tournament career, was also the co-founder of Xfire (which itself was acquired by Viacom in 2006). While the Raptr/Gaming Evolved client was useful, it seemed to have challenges from close to the start [or at least, noticeable in hindsight, from when I first started using it].

The Press Release – the notification that Raptr was closing down – as it looked on the Raptr website, September 2017
(Click to see Full Size)

At one time, Raptr offered Rewards for playing (and letting it track your Hours or Record your Gameplay); ‘Reward Points’ that you could collect, every time you Optimized a Game (let the utility auto-configure your in-game options/settings for you), or viewed/contributed to a game Forum (similar to Steam’s Game Forums [forii?]). You could also earn Raptr Reward Points just by playing a game and having it running (it gave a running total of your Hours Played).

The Raptr/Gaming Evolved Client, as it looked in 2014, showing the Reward Points collected at one time
(from the Gaming Evolved/Raptr Press Kit, Click to see Full Size)

Prizes to spend your Points on were Draws for, or outright purchases of, Full Games and game tie-in material, such as Character Costumes or Vehicles (Mounts). Just before it was taken away, I even saw some Computer Hardware in there (some dated GPUs mind you, but still, it was neat to see some computer parts you could earn ‘with time played’ only). I never did win a Draw for a Retail Game, but I heard from a couple of people who did. There were many, many upset users, who had been saving for years (literally), at the loss of the points system. Some noted at the time that perhaps it was an early bell, tolling for the end of Raptr, even then…

The Raptr/Gaming Evolved Client, as it looked in 2015, showing Plays.Tv in its ‘built-in’ Beta phase and Graphic Drivers being kept up-to-date [I owned an AMD/ATi GPU at the time], the client still showing Reward Points being tabulated, and the Twitch Broadcast implementation
(Click to see Full Size)

There was a Forum interface built-in to the Raptr client (directly-accessible within it) that was similar to Steam’s Game Forums [too similar?], where people could discuss games, talk about upcoming releases, and share Screenshots; but there wasn’t too much going on in them [that I could see, personally]. There were some helpful and contributive posts, but they were always few in number:

Example of Raptr/Gaming Evolved Game Forums, showing Guild Wars 2, circa 2016
(Click to see Full Size)

As ‘the end’ neared, the Forums became overrun slowly by Spammers and non-English posts talking about other websites (not that there’s anything wrong with speaking other languages, I know a bit of a handful of languages myself, but it was an English forum and much of these posts were clearly Spam of one sort or another). People started asking why things weren’t getting ‘cleaned up’, near the end.

The Raptr/Gaming Evolved Official Raptr Forum, shown in the client, displaying the number of users of the forum
(Click to see Full Size)

While many felt it was ‘just like Steam’ or ‘not needed’ even back then, it still boasted over 100 Million registered users at one point (as evidenced by the number of users within the main Raptr discussion group, above) – and it was even ‘targeted by hackers’ in 2015 – infiltrated in an attempt to gain access to the many users’ data and potentially personal information. A notice went out in January of that year, notifying users to change their password, as a result of the recent security breach:

Raptr Forum Notification, urging users to change their Passwords, after a recent security breach, circa January 2015
(Click to see Full Size)

Personally, I feel sorry that I couldn’t spend more time with Raptr/GamingEvolved, as I only discovered it a couple of years ago.. Over the entire time, my own illness prevented me from posting more, sharing Screenshots more, and talking more about Releases and Reviews [as it does here in this blog!]. I feel like it could have been ‘the next Steam with bonus game configuration’ perhaps – but alas, it simply had too many challenges going against it… People started asking for Chat interface (a la Skype) and Voice Chat, but the Voice part never came. People wanted a GVR (Game Video Recorder) and while that arrived, in the form of Plays.tv – first in the app itself and as a stand-alone utility – perhaps it was too late to save Raptr, as both NVIDIA then AMD, came out with their own ‘built-in’ gameplay recording capabilities about the same time. For example, in 2013, NVIDIA’s Shadowplay became part of their Settings Optimization client, GeForce Experience, which allowed high-performance gameplay recording. Eventually, AMD’s ReLive, part of their Crimson GPU Driver update, also allowed high-quality gameplay recording as well. Both of these essentially negated the game recording aspect of Raptr (Plays.tv, which continues onward today as its’ own stand-alone recorder):

Information Panel about Plays.TV, the gameplay recording utility that was once included with Raptr/Gaming Evolved
(Click to see Full Size)

Although many didn’t use Raptr, or even like it, there were those that used the client to at least keep track of their Hours Played, used it a light social-media app, or just enjoyed the semi-automated Graphic Configuration within. As a former user – that wished he used it more – I myself say a sad ‘Goodbye’ to Raptr. So long, old friend, I wish I got to know you better…

Sample Dining Room Minimalist Design Idea

Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

Sample Dining Room Elegant DesignSample Dining Room Elegant Design

Sample Dining Room Classic DesignSample Dining Room Classic Design

Sample Dining Room DesignSample Dining Room Design
Sample Dining Room Elegant DesignSample Dining Room Elegant Design

Are You Ready for NaNoWriMo?

I plan to encourage my students to participate in NaNoWriMo again this year. For those of you who aren’t familiar, November is National Novel Writing Month, or NaNoWriMo for short. It’s the month where tell your inner-editor to hush so you can just let the ideas flow on to the page. It’s about getting something done without worrying how perfect it is, because you can always go back and revise in December.

Last year, as October drew to a close, I introduced NaNoWriMo to my class. I explained the premise, and gave them the option of taking on the challenge. We talked about word count goals and commitment to writing outside of the classroom. Then the fun started. Student after student signed up, each cheering each other on as they dedicated themselves to writing a book. In the end, I think all but two students decided to participate. We had weekly lunch meetings where students could eat and share their writing with friends, and although not all students met their goals, they definitely started to find their voices as authors.

The Young Writers Program for NaNoWriMo has some great teaching materials to get your students psyched for NaNoWriMo and to teach them about narrative writing in general. You can check out their website at http://ywp.nanowrimo.org/. In addition, there’s still time to order a NaNoWriMo classroom kit which comes with a student goal setting poster, NaNoWriMo stickers to track progress toward a goal, and buttons for those students who participate or finish. The classroom kit is free (and awesome), but they request a $10 donation for the materials — a small price to pay to get your students excited about writing.

In honor of NaNoWriMo, I’ll be hosting a month-long link-up that will start on November 1 and run the duration of NaNoWriMo. Whether your class officially participates in NaNoWriMo or not, I hope you’ll join me in sharing the great writing work that’s happening in your class. Grab the button, spread the word, and meet me back here on November 1st for a writing extravaganza!

In the meantime, check out the Educators’ section of the Young Writers Project. I’m sure you’ll find plenty to get you (and your students) excited for a month full of creative writing!

Who’s in?

Original Mexican Mazel Mex

  • 2.5 cups cold water
  • 1.25 cups cornmeal
  • Generous dash cayenne pepper and/or cinnamon
  • 2-3 Tbs. corn oil
  • 3 onions, peeled and coarsely chopped
  • 8 large tomatoes, coarsely chopped
  • 1-2 fresh green or jalepeno chilis, peeled and coarsely chopped
  • 1-2 cloves garlic, peeled and minced
  • Diet Start
  • 1 Tbs. fresh cilantro, chopped and torn into leaves
  • 1 Tbs. fresh parsley, chopped

Combine water, cornmeal, and cayenne. Cook, stirring frequently, over medium heat for 5-8 minutes. Pat evenly onto bottom of 8″ x 12″ casserole.

Sauté onions in corn oil until translucent and fairly soft (10‑15 minutes). Add tomatoes, chilis, and garlic, and cook 2-3 minutes. Pour mixture over cornmeal base and bake in 350° oven for 20-25 minutes. To serve, sprinkle with cilantro and parsley.

YIELD: 2 servings.

Although taste is bitter if tomatoes are unpeeled, the peels are an important aid to digestion.

Hazel Enchiladas

  • 6-8 corn tortillas
  • 0.25 cup corn oil
  • 2 recipes Mazel Cheese Mexican
  • 1 recipe cooked Salsa Mazel
  • 1 recipe fresh Salsa Mazel

Dip corn tortillas in hot corn oil, then into cooked salsa. Fill with Mazel Cheese Mexican, and roll into enchiladas. Cover with cooked salsa. Bake at 350° for 15-20 minutes. Serve with fresh salsa.

VARIATION 1 Add I bunch fresh spinach, cooked and chopped, to Mazel Cheese Mexican.

VARIATION 2 Add 1 tablespoon fresh mixed chives and parsley to Mazel Cheese Mexican.

VARIATION 3 Use 1 recipe Mazel Cheese and 11/2-2 cups sour cream rather than 2 recipes Mazel Cheese.

YIELD: 2 servings.

Depending on size of tortillas and how you fill them, you may wind up with a bit of extra filling. If so, add it to the casserole or reserve it for another use. But better too much than too little.

Teacher Toolbox Trio Linky Celebration!

Since the advent of Teachers Pay Teachers, my teaching toolbox has changed quite a bit. There are so many things that I’ve made or bought for my classroom, and there are many others that are on my wishlist. To recognize that, I’m hosting a Teacher Toolbox Trio linky party.

Here are the rules of the trio:
1. Share a product that you’ve made that you couldn’t live without.
2. Share a product that you’ve purchased that you love.
3. Share something from your wish list that you’re hoping to get for next year.

If you’re not a seller on TpT, no worries — just share two products you’ve purchased that you love!

1. Something I’ve Made

The Classroom Economy Megapack was my first major project for TpT, and without question, it was the one that I used all the time last year. It has everything I needed for setting up my classroom jobs, monitoring daily behaviors on a clip chart, running my classroom economy, and giving students free/very low-cost rewards. Unlike my units that were used here and there, this was on display in my classroom all 180 days, and my kids loved it. This is the one thing that I could not live without.

2. Something I Purchased

Erin’s “A Roller Coaster Day” sub plans were amazing! I had to go to an all day district committee meeting on a Friday in May when the kids were already getting a little crazy, but they LOVED this. The sub said it kept them engaged all day, and given that I was already at the stage of the year when all of our required curriculum had been taught, it was perfect. It will be a permanent addition to my sub folder, and she’s also made one for grades 5-6. You can follow Erin’s blog: I’m Lovin Lit. 

3. Something on My Wish List

I’m really planning to focus on math facts and mental math skills early in the school year, and Laura Candler’s Mastering Math Facts has been on my radar screen for a while. I’m hoping to snag a copy before I go back in July. (Yes, July!)  Laura’s blog is Corkboard Connections.

The Linky Celebration

This is more than just a party — it’s a celebration! I’ve been meaning to do something to celebrate hitting 100 followers for a while now, and as I near the 150 mark, it’s definitely time! If you link up through the tool below, you’ll be eligible to win a $25 gift certificate from Teachers Pay Teachers — enough to possibly clear off some items from your own wish list!

clip art from KPM Doodles
I’ll be using a random number generator to select the winner from those who link up. The linky celebration will end next Friday, June 14 at 11:59pm EDT and the winner will be announced on my blog on Saturday.
Can’t wait to discover some new products and see some of your favorites! Be sure to link up below, and please include the Teacher Toolbox Trio icon and/or another link to Eberopolis in your post.

Happy linking!
document.write(”);

Spending Your Money Wisely with Quality Food

Wherever possible, it is best to grow your own food. This is a help with the family budget. But many excellent articles of food may not grow well in your particular locality. They must be brought from a distance and exchanged for cash. If you are on a limited budget, how can you spend your money for the greatest value in food? This is a very practical question.

Foods which are manufactured and refined usually cost much more than those in the natural state. At the same time there is danger that some of the minerals and vitamins have been lost in the manufacturing process. In such a case you lose out in two ways, first, by paying much more for the product, and second, by the loss of essential elements from the food. This is not a wise way to spend a large portion of your money. Do not be carried away by all the glowing advertising material on the package or container.

Take the question of breakfast cereals so widely advertised today, particularly those flakes that have been coated with sugar. Such breakfast food is scarcely worthy of a place on your table and in your family budget. Dry cereals in any form offer less nourishment than do the raw materials from which they are made. Much of real value is lost in the manufacturing process. And when a sugar frosting is added, the effect on young children is far from good. That sugar coating is the worst feature of all. This excess sugar increases the possibility of dental decay and often results in chronic indigestion as well.

Diet Start

Cereals and similar products that are cooked at home are much less expensive than those that are already prepared. The same is true of breads baked at home. They, too, are more nutritious. It does take time to prepare such food. But in the end this saves money, and the whole family will be healthier and more satisfied.

People in well-to-do households may not have much trouble in selecting an adequate diet, provided they take the time to do so. Unfortunately, most of them do not bother. They just eat what comes their way or what is advertised over radio or television. This haphazard way of living is likely to result in serious deficiencies.

The family with limited means must be even more alert to the problem of selecting a diet that is suitable, but not too expensive. They must not allow themselves to be swept away by the flood of advertising so prevalent today. They must buy wisely and well.

Those who live in the country may find the situation a little easier. A small garden, with a few hens and a cow, may enable such a family to live far better than one whose means are not limited. Everything depends on the choice that is made.

Actually you can feed your family better than you think you can. But it does take a little planning. However, people who live on a well-balanced diet are naturally happier and healthier. Such a diet need not be an expensive one. In fact, there are many experiments in rats and other animals showing that a less liberal diet tends to promote a longer life. Many modern nutritionists believe that we live on only about half of what we eat. The rest only compels our hearts and other organs to work that much harder to get rid of the extra food.

Experiments at Cornell University seem to bear this out. A certain number of white rats were used. Some were allowed to eat all they wanted whenever they felt like it. Others were placed on special diets when they were in a rat’s “middle age.” Those rats which ate as they pleased lived 600 days or less. Those on the diet in middle age lived over 1,000 days. The oldest rat lived 1,400 days, and he never had a square meal in his life! It is not the quantity of the food, but the quality, that counts.

Planning Better Meals

Some people become confused over such scientific terms as calories, vitamins, minerals, and so forth. This is quite understandable. But don’t let this scare you too much. Today you can balance your diet fairly well without knowing very much about these various terms. Without going into too much detail, you can reach a good middle-of-the-road plan that is almost foolproof.

During recent years nutritionists have worked out what is known as the “basic seven” food groups. If these foods are included in the diet each day, they will meet the needs of the whole family very well. One does not have to bother with all the endless details of a complicated diet. Just follow this basic plan.

These seven food groups are easily recognized. They should become the foundation of each day’s meals. Some foods from each should be in one meal, others in another. But these essential things should always find a place at some time in the day. Other things may be added as desired. But it is best not to get too far away from this simple daily program. If any of these basic groups are missing in your daily planning, your diet is likely to be deficient in some things that are vitally important to good health.

Health Benefits of Guava for Health and Beauty

Health Benefits of Guava for Health and Beauty

Health Benefits of Guava for Health and BeautyGuava has a Latin name Psidium guajava is also often described as guava and guava. The origin of the fruit is reportedly from a country where the sport of football was born, namely Brazil, and managed to get in Indonesia through trade channels in Thailand.
Guava and Guava has a sweet taste, and not infrequently there is still sour. Round shape leaves with green skin and flesh have two color variants of white and red are where there is little seed seeds can also be consumed.
Health Benefits of Guava for Health and Beauty - 1
The Nutritional Content of Guava
There are dozens of nutrients stored in guavas and in each of these nutrients plays an important role in terms of health shore up the human body and diligent person to consume.
Here are some nutrients that are embedded in Guava :
• The Water Content Is Not Small
• Contains Fiber
• Calories
• Containing Protein
• Fats
• Contain Carbohydrates
• Contain Iron
• Abu
• Containing Calcium
• Containing Phosphorus
• Contains Vitamin A (Carotene)
• Contains Vitamin C (Ascorbic Acis)
• Contains Thiamin (Vitamin B1)
• Contains Vitamin B2 (Riboflavin)
• Contains Niacin (Vitamin B3)
With the presence of a number of nutrients above the guava fruit can be said as the fruit is also rich in nutrients. Because of them that many people who want to cultivate the fruit is sweet, while it was for her own use is not only edible but also processed into drugs.
Benefits of Guava
Many diseases are able to be deflected slowly by this fruit, some of which are as follows.
1. Can Fight Cancer
Get used to a healthy lifestyle on a daily basis in order to avoid serious diseases such as cancer that have reported more patients to death. You can prevent cancer in a way that is diligent guava consumption. There is an antioxidant that is able to do this. Lycopene in guava is known it is easier to be absorbed in the body than the tomatoes because the difference in cell structure.
2. as Diarrhea Drug
Diarrhea should be quick to take medication. The medicine is not to be made in the factory, you can use a method that is more secure and healthy as a drink with guava juice three times a day. Guava plant also has antibacterial properties, these properties that you can use to stop diarrhea and dysentery. The antibacterial properties either be created because of the content of karetinoid, vitamin C and potassium in it.
3. Can Lower Blood Pressure
For People with hypertension are often recommended by doctors to familiarize the consumption of foods and beverages derived from guava and mangosteen peel. Why? because the fruit contains potassium, which is said by the results of the study were able to treat hypertension and lowers LDL cholesterol excess.
4. Cough and Flu
Highly vulnerable to extreme weather conditions to make your baby have a cold with a cough. The mother must take action, by giving red guava juice that also contained vitamin C and iron which can inhibit the influenza virus infection.
Health Benefits of Guava for Health and Beauty - 2
5. Can Overcome Constipation
Constipation or constipation is the most frequently encountered problems. If you suffer from the same thing you do not immediately take medicine, try to eat a medium-sized guava fruit which also included a 36 percent fiber needs that doctors recommend.
6. Make More Stomach Satiety
Guava is the food you choose as a booster stomach, because the content of fiber, protein and some vitamins in it is suitable to withstand hunger. If you are running the program for the diet, the fruit seems appropriate to provide chances of success of your endeavors.
7. as Drug Thrush
Thrush occurs because a deficiency of vitamin C as well as drinking water. You can meet the daily requirement of vitamin C by eating guava, besides that because the vitamin content can be overcome thrush was moved at this fruit.
8. Diabetes Mellitus
Drink a concoction of guava which has been boiled and filtered water is believed to be able to treat the disease diabetes mellitus.
9. Younger
Antioxidants are cooperating also with vitamin A, C and potassium in guava able to treat your skin to keep it tight so avoid premature aging.

It is remarkable not properties of guava fruit that previously may not know fully. From now make guava as a table fruit that is ready to wash the mouth after every meal. Hopefully article Health Benefits of Guava for Health and Beauty we share today can be beneficial for you. Thank You.

Fabulous Fiber!

Everyone has heard that they need to eat fiber, but few people really know what it is and why it is so important.     Fiber is a form of carbohydrate along with sugars and starches.      Unlike sugars and starch fiber cannot be used for energy because it cannot be broken down into sugar.     Starch and sugars both end us as blood sugar aka glucose.
Starches are simply multiple units of sugar hooked together, and we have enzymes that break them apart so we can use the sugar for fuel.   Fiber is also multiple units of sugar hooked together, but humans lack the enzymes necessary to break it down into sugars so it is not absorbed.    This is very important when thinking about carbohydrate containing foods because they are NOT all the same.
For example, a glass of fruit juice is essentially a glass of sugar water with some beneficial plant chemicals and in many cases a nice dose of vitamin C.    It can dramatically boost blood sugar, and if you consume too much it can definitely drive weight gain.     While a large serving of brocolli is mostly fiber with little sugar and starch and is also chock full of beneficial plant chemicals, but with almost no effect on blood sugar!
There are two main types of fiber – soluble and insoluble.    Ideally you want to eat both.   There is also a third type of fiber called “Digestive Resistant Starch” (see https://workoutanytime.blogspot.com/2017/10/digestion-resistant-starch-all-starch.html)
Soluble fiber, found in foods such as cucumbers, blueberries, and beans, has a gel-like consistency and slows down your digestion.     This helps with satiety (feeling satisfied).    It also slows the break down and absorption of cholesterol and other nutrients like starches and sugar which can help lower cholesterol and control blood sugar.    Some foods with soluble fiber also help feed the good bacteria in your digestive tract.
Insoluble fiberis found in foods like green, leafy veggies, green beans, and celery.    It does not dissolve to a gel and stays intact as it moves through your colon.   By adding bulk, it helps food move more quickly through your digestive tract reducing transit time.  Insoluble Fiber is sometimes referred to as “roughage”, and it along with soluble fiber can help with constipation.
Benefits of High Fiber Intake
Fiber intake is very important for keeping blood sugar levels under control, and studies have shown that people who take in at least 26 grams of fiber per day had a much lower risk of developing Type 2 Diabetes.
There is also an inverse relationship between fiber intake and heart attack, with research showing that people eating a high fiber diet have a 40 percent lower risk of heart disease.    High fiber diets may also help lower blood pressure.
Another interesting research finding about fiber is that for every 7 grams of fiber you consume each day your stroke risk is decreased 7 percent.      To put this into perspective this equates to about 2 servings of fruits and vegetables.
Fiber, and psyllium in particular, can help move yeasts and fungus out of your digestive system which may help prevent them from triggering acne and rashes.
Fiber can also provide relief from irritable bowel syndrome in many people.
Fiber intake may also help reduce the risk of gallstones and kidney stones probably through its action in controlling blood sugar.
Sources of Fiber
Contrary to popular opinion grains are probably not your best source of fiber.    Unfortunately, non-organic grains are chock full of glyphosate which is pesticide banned in most other countries outside the US because they have no allegiance to Monsanto who produces it.    
A high grain diet promotes insulin and leptin resistance thereby increasing your risk for Type 2 Diabetes, Heart Disease and Cancer. 
Better choices of fiber includes Organic Whole Husk Psyllium.     If you use this supplement it is critical to get organic psyllium as non-organic psyllium is heavily sprayed with chemicals.     Other great sources include chia seeds, berries, root vegetables such as sweet potato, peas and beans, mushrooms, broccoli, cauliflower, Brussel sprouts and celery.
How much fiber?
Experts recommend that woman eat a minimum of 25 grams of fiber per day and men consume 38 grams per day.     However higher intakes may be more beneficial.     
It is important to SLOWLY increase your fiber intake and keep your water intake high to prevent potential issues caused by eating fiber without sufficient fluid.
Low-Fiber Diet
There are circumstances where high fiber intake is contraindicated and timing for fiber intake relative to drugs and supplements is important.   People with chronic digestive issues may need to remove fiber for some period of time because fiber feeds the bacteria in your gut.    Although as a general rule this is highly beneficial there are circumstances where high fiber intake can feed the wrong microorganisms such as pathogenic bacteria.

Fiber can also bind certain medications and minerals dramatically reducing their absorption so many drugs and mineral supplements should not be taken at the same time as fiber.

The carbohydrate jewels

By upping your intake of low GI fruit and vegetables, you will not only be on your way to becoming leaner, but you will have a profound effect on your health. The amazing phytonutrients (plant nutrients) that you find in brightly coloured raw organic fruit and vegetables are clever little substances that can protect you from ill health in various ways, although many people’s diets are sadly lacking in them.

Phytonutrients can help regulate the immune system, stabilize vitamins in body tissues and protect from serious illnesses, such as such as cancer. They do this by working as antioxidants alongside vitamins A, C, E and D, and the minerals, selenium and zinc. As a team, these powerful compounds have the ability to slow down the damaging oxidative process caused by those ‘enemies of a healthy state’, the free radicals. Antioxidants can also rid the body of these free radicals, which are the natural waste products of metabolism, which, if left unchecked, can lead to degenerative disease, by causing imbalances on a cellular level.

Diet Start

Take note that these free radicals are also found in overheated oils and fried foods, another good reason to kiss junk food good bye.

They aren’t classed as essential nutrients, but without phytonutrients your sense of wellness would be severely compromised.

They work in the body at deep physiological and biochemical levels, and luckily enough are to be found in low-density/low GI fruit and vegetables. Eating these raw wherever possible is the key to maximizing their life- enhancing qualities. Cooking destroys many of the benefits that you will reap if you include a colourful array of energy-boosting raw fruit and vegetables in your daily diet.

Life is a balancing act

So now you have a better understanding of the impact that the wrong carbohydrates can have on your body, and have established that you need to incorporate more of the colourful and low GI fibrous fruit and vegetables in your diet. But man cannot live by carbohydrates alone. You will have to take a close look at the two other macronutrients that work hand-in-hand with carbohydrates to provide energy and nourish the body: protein and fats.

The key to balancing blood-sugar levels, banishing insulin resistance and losing excess weight lies in successfully balancing these three macronutrients.

Wauconda WORKOUT ANYTIME Opening Doors Soon

Wauconda WORKOUT ANYTIME Opening Doors Soon

The new Wauconda WORKOUT ANYTIME, owned by Jeff Cercy will be opening their doors by the end of the week. The club, located on Liberty Street in the Jewell Osco shopping center, will be celebrating their grand opening on March 22nd. The equipment is all in place and the final touches on flooring and painting has all been completed.

The public is welcome to come out and see the new club. Those interested in joining can call 847-526-4088 or register on the club’s website: http://workoutanytime.com/locations/wauconda.

CONCEPT INTERIOR DECORATORS NYC

Interior Decorators NYC

Interior Decorators NYC, there are many different benefits to live. Here, culture, food corners, training, and last but not least, the lounge and bar. If you want to spend a night in the city that never sleeps, then to New York City is a great bar, club and lounge, in particular to go. There are several rooms, and also spread throughout the city. live musicians are the best features of these lounges and bars. You can find indie rock band a lot of volume, and other local bands. Part of the show in New York City, a tremendously well. They are tastefully decorated, and the crowd, which is very appealing. These amazing living space in this late night to win the House, hip hop and youre likely to find one that will fit your musical taste.

They offer large crowds and expensive liquor and very elegant. The interior decoration of these rooms are for lights, big boost mood of the series, in fact, people also benefit from seeing the crowd warm with loud music and too much light. Interior Decorators NYC always find some very funny and what’s better than a bar, club lounges and especially where you can make your night of fun. Once your stomach is full with the best drinks in the theaters of New York, then is time to rock and roll music and if so, what better than a living room and also in New York, where fun begins.

In addition, these shows are also very useful during the time of the wedding reception. People are now tired of planning parties in hotels and other places. now part of wedding reception is poured into large halls, where people enjoy the maximum level. New York reception halls are simply incomplete without drinks. Here you can plan a cocktail, and also a bachelor party incurred prior to marriage. You can enjoy unlimited drinks which is great taste and you can also enjoy the loud music here. This part of reception or a cocktail can be fun with friends and other relatives. You know some reception includes dancing and fun, and this is the basic ingredient and that is what makes a great party for everyone. It is therefore the reception of the show is so famous in Interior Decorators NYC.

Interior Decorators NYC
Interior Decorators NYC

Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size
Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size

ReShade by Crosire (reshade.me)
SweetFX by CeeJay.dk (ceejay.dk)
Game Material by Bethesda Game Studios (bgs.bethsoft.com)
Captured by Troy from The Game Tips And More Blog

Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
Right back at ya’, Beth! 
“Thank You” ~ Sincerely, The Game Tips And More Blog

Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

Overweight and Food Sensitivity Rule No 1: Delayed Reactions

These are the single most common cause of false fat.

Arguably, delayed food reactions cause as many health problems as some of the most horrific of life’s various risk factors, such as smoking or stress. The effects are often subtle and accumulate slowly, but the harm is undeniable. Without a doubt, delayed food reactions cause weight gain. Because 300,000 people die each year from obesity-related problems, anything that exacerbates weight gain is a serious issue.

Therefore, the average person’s ignorance about delayed food reactions is a serious public health problem. Don’t let yourself be a victim of this lack of knowledge!

Delayed food reactions are very similar to classic allergies. The biggest difference is that when you have sensitivities, you often don’t notice symptoms right after you eat. Sometimes it can take as long as three days for symptoms to appear. The reason for the delay is that this type of food reaction is caused by a different antibody than the one that causes classic food allergies, and it takes longer for allergens to come in contact with this antibody. This antibody, IgG (or immunoglobulin G), is found only in the bloodstream, so food molecules need to reach the-bloodstream for problems to occur. As long as food macromolecules stay in the digestive tract, no symptoms may appear. Sometimes food molecules move out of the digestive tract almost immediately, but sometimes they don’t.

Diet Start

When reactive food macromolecules do eventually meet up with IgG antibodies, the antibodies wage the same basic type of battle fought by IgE antibodies, which cause classic allergies. The IgG antibodies call the immune system into the fight, and histamines and other chemicals are released, causing swelling and other symptoms.

The IgG antibodies are by far the most common antibodies in the body. They’re three times more common than the IgE antibodies that cause classic allergies; that’s one reason delayed food reactions are more common than classic allergies.

Because IgG reactions are delayed, people are often unaware of their real cause. If you feel a symptom on Monday morning, it may be hard to link it to something you ate Friday night.

Another reason people are often unaware of their IgG reactions is that these reactions often don’t occur in obvious places, such as the skin, as do classic IgE allergies.

Even though an IgG reaction may not be obvious, it can still be very harmful. For example, if you’re allergic to bee stings and get an IgE reaction on your skin from a sting, you’ll be sure to notice and treat it. However, an internal IgG reaction to a food may ultimately cause you much more generalized, systemic swelling than a bee sting; it’s like getting a bee sting to the whole body. But because your reaction is spread over your whole body, you may not be very aware of it. All you’ll notice is that you don’t feel good and have more bloating and swelling. After you’ve read this book, though, and learned what to look for, I guarantee that you will notice how drastically food reactions affect your body.

Another antibody that can cause delayed reactions is IgA. IgA fights at the front lines — at the mucous membrane sites and in the digestive tract itself — trying to stop allergens from being absorbed by the body in the first place. To do this, it stimulates secretion of mucus, which blocks absorption.

Studies show, though, that almost half of all Americans don’t secrete enough IgA. Non-reactive people secrete 3,000 to 5,000 mg of IgA every day, but some reactive people don’t secrete much at all. If you’re low on IgA, sooner or later a reactive food molecule will work its way through your intestinal wall and cause a reaction. The more reactive foods you eat, the more likely you’ll be to use up your supply of IgA and lose your front-line force against food reactions.

Therefore, if you do ‘cheat’ and eat an allergenic food, it’s smart not to eat too much of the food. One jam doughnut might get blocked by IgA, but three doughnuts may overwhelm your forces and push you past your allergic threshold.

Another factor that depletes IgA is use of certain medications, including antibiotics, antacids, ulcer drugs, cortisone and aspirin. Again, as you can see, it’s not just what you eat that can hurt your metabolism and make you fat.

Number Talks Chapter 1 – Thumbs Up for the Silent Thumb

I’m linking up with my friend Misty over at Think, Wonder, & Teach for her summer book study of Number Talks: Helping Children Build Mental Math and Computation Strategies, Grades K-5

Given that I’m wrapping up a K-5 Math Endorsement this month, this is a timely book for me. I love to teach math far more than I ever anticipated that I would when I entered this profession, and I really enjoy getting students to share and discuss their mathematical thinking. I’ve noticed, however, that many students lack strong mental math and computation strategies, relying instead on memorization to get them by. By the time they get to 4th grade, that’s not really a viable strategy anymore. They’re starting to work with much larger numbers, and they subsequently have more parts and steps to keep straight in their heads. If they don’t have great mental math strategies going, then it’s likely to become a mess pretty quickly. They can always solve problems on paper, but unless they have the good number sense that goes with doing mental math, they’ll never be able to gauge the reasonableness of their answers. In those regards, this book seems like a great idea.

Chapter 1 really just introduces the concept of a number talk, and Misty does a great job summarizing it, so I won’t go into that here. One of my favorite teaching ideas from the book so far, however, was the idea of the “Silent Thumb.” When students are given a mental math problem, they need some “think time.” But every class has 2-3 students who are super math-letes who have the answer before the rest of the class has even processed what problem they’re being asked to solve, and those kids with their proud “I know! I’ve got it!” hand-waving typically end up dominating the conversation. The “silent thumb” solves that problem. All students hold their hand in a fist over their chest as they solve the problem. When they’ve got an answer, they move their hand from a fist to a “thumbs up.” They then think of another strategy to solve it while the other students are thinking, and for each additional strategy they come up with, they extend a finger. Awesome, right? I love how this gives all students some think time without creating pressure for some kids to hurry up because the fist is held close to the body — not waved in the air for everyone else to see. It also validates those super math-letes for their mathematical thinking by allowing them to communicate to the teacher that they have multiple strategies for solving the problem. And if they don’t have multiple strategies, then they have something to think about while the others are working.

I’m definitely interested in learning more about Number Talks, and I’m excited to delve into this book a bit more. I’ll be posting more about this book in the weeks to come as I link up with Misty’s book study.

If you don’t currently have a copy of Number Talks, you can still read the first chapter online. The book is a little bit pricier than most professional development books, but it comes with a DVD full of examples and it has a lot of resources packed in the text. If you’re looking to increase students’ mental math abilities, then this could be a great resource to use.

Be sure to check out Misty’s Number Talks chapter 1 linky party where you can add some ideas of your own or read what other teacher bloggers are saying about the book. I promise you’ll find some great ideas there!

And click here to see my review of Chapter 2!

Have you ever done Number Talks in your classroom? I’d love to hear about your experiences in the comments section!

Thanks for reading,

INTERIOR DESIGN IN BANKE HOTEL

BANKE HOTEL

BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

BANKE HOTEL DESIGNBANKE HOTEL DESIGN

The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

How To Use The Mouse To The Best Of Your Ability (a.k.a. How To Be A Better ‘First Person Shooter’) [Text-Only]


[Text-Only – This Post is Text-Only Mode, for now. I may return to this posting and add Screenshots or Images at a later time.]

I was browsing around in the Steam Forums [forii?], where I like to try and answer Technical Questions and give Suggestions about Gameplay and Tips – and I recently answered a query someone had about using the Mouse in Fallout 4 (arguably a ‘Shooter’ game for the most part) and how it seemed difficult for them to aim in the game (it is possible to utilize an Automated Aiming capability called V.A.T.S., in Fallout 4 – but the game can also be played ‘in real time’ without it, playing as a First Person Shooter would be played, similar to games like Overwatch, Counter Strike: Global Offensive, Battlefield, and more).

So, I answered with a somewhat-lengthy reply, trying to be helpful and informative, letting them know where to do things like change the Settings of the Mouse and the Sensitivity; really trying to show them that there needs to be a ‘personalization’ of the Mouse Settings, if they wanted to utilize the Mouse, as a gaming tool, to the best of their ability (to “let your ability shine through the Mouse” as it were).

I thought it might be nice to share my answer here too, then – to share with others that may be wondering things like:

“Why am I having so much trouble aiming/killing in <game name>?”

“Why does it seem so hard to kill people <in a Multiplayer game>?”

“How can I improve my gameplay in Multiplayer/Player-Versus-Player?”

…and similar questions.

Thus, here was my reply in the Forum… Perhaps it can be of some use to you:

—–

If I may pop in, as a ‘First Person Shooter’ since Wolfenstein 3D (1992), and having won some Local Tournaments in the past (UT99 and Quake III Arena); you really need to find your own personal ‘mouse sensitivity’…

(I used to do 180’s while running to ‘check my six’ or headshot the player behind me – which they didn’t like of course, heh)

Note that this must be adjusted for every new mouse and potentially every new game. This is the only way to truly have a movement and reaction time/rate in the game that you personally feel comfortable with.


There are a few places you must adjust it:

– in Windows (Settings>Devices>Mouse [for Windows 10])
– in Mouse Software (that disc that comes with the Mouse that everyone ignores, or the manufacturer’s Drivers and associated ‘Software Configurator’ of some type for the mouse from their website), where you can also Keybind different keys or combinations to your Mouse, if it can do so, and set DPI gradations/steps.
– in the Game (Options or Settings)


Again, I cannot helpfully stress this enough; try to do this for each and every game you play – it is amazing in how it can personalize your comfortable movement/scan/hit rate.
It is really possible to ‘hit anything’ in a game, if you make your own personalized changes to all of the above.


Some people like to move their mouse a lot, slowing down the movement into smaller gradations for sniping and tight movements.
Some people like to move their mouse very little, using mostly their fingers and hardly turning their wrist (these types usually switch DPI settings as-they-move, for sniping and tighter movements).

Both are arguable for usage and both can utilize the DPI settings/changes possible on modern mice.
You must find your own movement type and movement rate, set by those three locations previously stated.

Once you set the mouse how you like it – whether you switch DPI settings on-the-fly (to make your character scan slower or faster, switching between scoped and non-scoped, for example) or whether you keep one DPI setting and alter how fast you move the mouse – you will find that you can aim/scan/hit a lot better (and also not get tired as fast).

Tip: Don’t forget to turn off any Mouse Acceleration (The kind that moves your mouse pointer farther on the screen if you move the same amount of space on your desk, only faster)… This only adds to the difficulty in scanning/aiming and makes it harder to build up muscle memory for your mouse (such as, “I move my mouse this far, and my view onscreen moves this far”).

The only recourse, other than doing the above and taking all of the above steps, is V.A.T.S….(at least, to be totally comfortable and ‘reach your full potential’ with the Mouse (wow this is starting to sound like an Infomercial, sorry about that haha))

But, try to have fun exploring it – find “You” in your mouse movements – and have fun learning how “You” play!

—–
Note, Dear Reader, that I am not trying to ‘be pompous’ or ‘brag’ here, with this posting… I merely stated my ‘qualifications’ at the beginning, to show that I learned a lot over time and that I had personally found some effective ways to improve playing, with the Mouse (especially in the past). 
I do not wish to sound like to ‘know everything’ as well – and indeed can learn more – I just wanted to share what I did learn over time and hope that this might help others out, too. If you are an experienced FPS player (‘First Person Shooter gamer’), then you no doubt already know most of these concepts (or have figured them out on your own). 
I should state that I am also nowhere near as good as I once was [being 40 now, alas, age occurs to all..]. Where I once could out-shoot almost anyone, regularly doing 180s-to-instant-headshots (as stated previously), I now regularly get my butt handed to me in games like Overwatch, CS:GO and the Battlefield series of games [although I can still get Top Spot on The Board at times! heh]. 
Still, I wanted to try to help others… and I hope that this posting helps anyone improve their mousing (and killing/winning), if that is what they desire to do. 
I always like helping others and teaching others what I can… “The wiser mind mourns less for what age takes away than what it leaves behind.” ~ William Wordsworth (1770-1850)

SYITG

10 TIPS TO DECORATE KIDS BATHROOMS

Teach young children the fundamentals of responsibility bathroom can be a challenge. From potty training to control the way you brush your teeth, bathroom children should be a place of inspiration and pleasure for them to learn and grow. Child bathroom decoration can borrow design elements of your room. With color, the creative organization, and areas designed exclusively for little hands and creative minds, here are 10 tips to decorate their bathrooms. Depending on the age of your children, follow these tips to design your age in mind. For young children, bright primary colors are inspiring, and for older children feel more mature palette of neutrals and pastels.

KID’S BATHROOM DESIGN

KID’S BATHROOM DESIGN

1) Create a colorful background: Although most of the plumbing fixtures remain in neutral shades of white, bone or brown, it is essential to their subject is colorful and fun. Consider painting the vanity, wall, wallpaper, stenciling and playful lyrics on the walls. Be careful when you use the stickers that moisture in the bathroom can lead them to ignore good.

2) Keep the walls with clean surfaces sustainable: When decorating a child’s bathroom, especially around wet areas such as toilets, sink and bathtub, make sure the surfaces are easy to clean and durable. ceramic wall tile, wall painting wainscoting panels are washable and ideal.

3) Provide adequate lighting. This advice applies to any bathroom! You do not have dark areas in the bathroom. In terms of cleaning and a bit to see what they do. Bathrooms for children are a priority area of ​​injury, as wall lighting, overhead ambient lighting, ceiling lights and even in the vanity are clear and are not shadows.

4) the organization is the key to learning, children’s room when decorating a child to remember to put the bathroom easy to find areas of the organization, and easy to reach new heights. Vanity sank in open shelves under the bath toy suction cup holders and bins hygiene products to help children to keep the bathroom clean and tidy.

5) Small furniture a little ‘small: Believe it or not is a fitting suitable for babies and small children. There are different estimates for lower mobile is a good lesson for children how to use the toilet. Regardless of the customer, when planning your baby’s bath, to know the options are there for the growing child.

6) to accessorize on a budget: You can spend a fortune to decorate the bathroom of your children also understand that a simple color palette of coordinated accessories that are affordable, can give an overly great! From color-coordinated towels, rugs, shower curtains and hygiene products, operators can combine colors and patterns and decorations.

DECORATING KID’S BATHROOM

DECORATING KID’S BATHROOM

7) The theme of the election: if you are at a loss how to decorate your bathroom kids, consider to choose a theme they have. Derived from animals, sports and entertainment activities to spend time with their favorite cartoon characters and favorite color, the options are endless. If a child is old enough to ask them their opinion on how they would like to decorate your bathroom.

8) Bathroom safety: Make sure the bathrooms have the proper procedures instilled in interior design. Even though a beautiful crystal vanity knobs cabinetry might be nice to see, if not secured properly can be dangerous for children. Make sure all the furniture, harmful chemicals, and decorative elements are not easy for children.

9) Update bathrooms of a teenager: For older children and adolescents want to want to accessorize and color coordinated decor may not be as strong. Instead, opt for temporary accessory that can change depending on your mood teenager! colored towels, rugs can coordinate a work of art hanging on the wall all have their own bathroom needs to make your teen feel comfortable in their space.

10) Keep it simple: It ‘s easy to wrap decorate any room in your home. Remember to have fun when decorating your bathroom children, and to seek inspiration from blogs, interior design magazines and shops to visit in local dishes. Many stores offer “instant bathroom furniture for you. combinations of color coordinated accessories, you can mix and match. No thought required!

Bring together elements to your bathroom decor kids can be fun and easy to use these 10 tips. Consider your child’s age when decorating, as well as a way of life. If you are a busy parent who does not have time to clean the bathroom with lots of toys to keep open the basket and quick cleaning areas. Remember that you are teaching and inspiring children to enjoy swimming and creative learning.

LUXURY DECORATING KID’S BATHROOM

LUXURY DECORATING KID’S BATHROOM

MODERN SWEDISH BEDROOM DESIGNS GO SROP

Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

Monitoring weight loss

There are two schools of thought on how to monitor weight loss:

  • Daily weighing
  • The once-weekly weigh-in.

This is an individual issue. If you are the sort of person who needs a daily date with your weighing scales, then by all means do so. Keep a record of your progress using a chart like the one opposite. You may see weight-shifting patterns emerging and be able to isolate foods that have a negative effect on your weight. If you prefer the surprise-at-the-end-of-the-week, that is fine too. You should still keep a record and watch out for any plateaux where weight loss dries up, which may mean that you need to lower your carbohydrate levels or increase your physical activity.

Whichever your preferred monitoring method, keep a tight-fitting pair of trousers or other item of clothing and try them on regularly to establish how your shape is changing. Your weight may stabilize for a while, and if you are exercising regularly and increasing your muscle-to-fat ratio you may even may weigh slightly more for a bit, but you will be fitter and – in the end – leaner.

Diet Start

TOP ANTI-SNACKING TIPS

  • Try not to snack while watching television, playing video games or using the computer. Eat meals and snacks in the kitchen or dining room, so that you are more aware of what- and how much — you are eating.
  • When you feel a snack attack coming on, run a bath, go for a walk, ring a friend… Do anything that will keep you away from the refrigerator.
  • Don’t go shopping when you are hungry — it is then that you may reach out for that chocolate bar.
  • If you are going to snack, make sure it is a protein snack.

Dietary demons – and how to beat them

  1. Not so well-meaning friends and family members: one of the mostdifficult things to deal with is the friend or relative who tries to sway you off-course. Don’t be bullied into breaking your resolve. Decline politely andexplain that you are relying on them for support. If you are visiting them,take a whey-protein smoothie with you.
  2. Boredom: you shouldn’t get bored following the plans,because there are so many different things to eat and ways to prepare your food. Even if you aren’t a natural cook, experimenting in the kitchen willkeep you motivated.
  3. Alcohol: you are allowed a couple of glasses of wine when you start the
  4. Keep on Tracking Plan, but don’t be tempted to have more. There is nothing like a little extra alcohol to persuade you that you’ll start againtomorrow. Avoid the ‘drunken munchies’.
  5. Snack attacks: the three dietary plans allow for a couple of high-proteinsnacks each day between meals, but you could easily undermine all your efforts by hitting the biscuit jar in a moment of weakness. Clear out anything vaguely tempting from your refrigerator and cupboards, and be very carefulat times when you normally seek comfort food.

Curb your cravings by curbing your carbs

When you start eating more healthily and reducing the amount of potentially addictive carbohydrate-laden foods, you should find that your cravings begin to diminish as your blood-sugar and insulin levels even out. This will usually take about 48 hours when you start the Fast-Track Plan. If you do get a ‘snack attack’, try making yourself a whey- protein smoothie; or keep a plate of cold chicken in the refrigerator for weak moments. You can’t necessarily kill a craving, but you can wrestle it into submission.

PIONEER STUDIOS OFFICE MICROSOFT BY SKB ARCHITECTS

The New Pioneer Studios Office which was designed by SkB Architects starting from the idea that need a space to socialize at night as well as it functioned during the day.

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
(Click to see Full Size)

Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

[Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

HOME DESIGN FULL OF COLOR AND INSPIRING

It was probably what the designers had in mind when you fill this place with colorful decoration items such as floor cushions, rugs and rustic small packages. Because the white background, these elements stand out and create a pleasant visual contrast. The living room, dining room and kitchen are connected not only physically, but also intelligent design. We love the way the house seems to be decorated according to a fun pattern, which consists of color and youth.

Home Design Full of Color and Inspiring

Home Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

WORKOUT ANYTIME on FOX 56 Lexington

WORKOUT ANYTIME on FOX 56 Lexington

Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
View the full segment here.

Knoxville News Sentinel featuring Kurt and April Nitzsche

Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
You can view the online article here. 

Quick Tip: The Sims 3 – Game Recording Is Slightly Darker Than The ‘Normal’ Colours Of Regular Gameplay [FIX]

Just a Quick Tip for those of you recording The Sims 3 and finding that your videos are looking ‘darker’ than the original gameplay itself – a problem that has been around for some people for over a year now… It’s not that the game isn’t recordable (although for some people they got nothing but ‘blank/black screens’ a few years ago) it’s that the recordings are coming out, what looks like, a few shades darker than what the game really is.
I was recently seeing a spike in the number of people talking about this problem again and decided to see if I could find a fix, or at least a workaround, for it; and what I found was something that everyone can do for now (at least until AMD/NVIDIA or Maxis/EA makes an update that fully fixes the issue) and that is simply: to run The Sims 3 in Windowed Mode.

Whether you are using Dxtory, Bandicam, Afterburner or most other game recording programs (even NVIDIA’s Shadowplay has the same issue for some people), the fix [more of a workaround] that I found for now at least allows you to record your Sims 3 gameplay with proper colours, as you can see in these frames extracted from a couple of game recordings, below:

Comparison between the display modes and the colours when recording (Darker vs. ‘Normal’) for the recording issue with The Sims 3, showing that the workaround works [at least for now] in two extracted frames from two game recordings (one in Windowed Mode and one in Fullscreen Mode). [In the right half, the camera has been ‘zoomed in’]

Have fun recording your Sims 3 gameplay once again, if this problem has made you stop – and
See You In The Games!

cool little trailer with a hinged top

https://www.instagram.com/bikergeardotstore/

Fallout 4 – Things The Game Doesn’t Tell You Or Explain To New Players Very Well (in Point Form) [UNDER CONSTRUCTION]

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it eventually… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there was a Steam Sale on (Welcome New Players, heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]

I’m having a ton of fun playing Fallout 4 (as I always say, ‘spending too much time Working On Settlements and ignoring the Main Storyline’) – but I wanted to share a bunch of things that I had to ‘figure out on my own’ in the game, or that I saw others had to (in forums, etc)… There is a kind of Tutorial in the first town in the game, and when you first start out some things are explained, but not much after that (there are some Instruction Screens the first time you Lockpick or Hack A Terminal). Below then, are a handful of concepts, in point form, that I wanted to share; especially for New Players, that the game doesn’t quite cover (or ‘cover enough’):

  • If it says “You lack the requirements to create this item” … and you have the requirements and Perks listed… there can actually be more Component requirements (build materials needed), you have to SCROLL DOWN on the Requirements List (labelled “Requires”) to see them
  • How to Holster your Weapon: Hold R for a moment (on PC, by Default); the same key as you have set for Reload (The game walks you through Aiming and Reloading, but does not seem to cover Holstering)

  • Weapons do not need to be Repaired in Fallout 4, but Power Armor can be damaged and need Repairing at a Power Armor Station, which can be found in Towns and Settlements, and can be Crafted in Workshop Mode as well (they require two Perks/Skills; Armorer (Rank 1) and Local Leader (Rank 2))

  • How to use the VANS Perk so that it shows the ‘Trail to Follow’: (See my article on V.A.N.S. … hold Q for a bit, then put away Pip-Boy right away with TAB and the ‘smoke trail to follow’ should be left behind)
  • You can adjust the Difficulty at any time in the game, even if it is just temporarily (such as if you are ill and can’t fight as well for a while). To change your Difficulty, bring up the Menu while playing (Escape on the PC), then go into the Settings, then into the Gameplay category, changing the Difficulty in there, from Very Easy all the way to Survival Mode (where you have to Sleep, Eat and Drink to stay alive and everything is ultra-hard to kill!). The chance for Legendary Items (and the Legendary Enemies that carry them) increases with the Difficulty – but you can also increase the chance of Legendaries by simply going further South and East, increasing the Difficulty of the Area/Mobs/etc
  • If you TRADE with Dogmeat he can carry Items like all other Companions can (he can also wear Dog Apparel, such as Dog Armor or Dog Collars, if they are found in The Wasteland)
  • You can increase how much Robot Companions can Carry, depending on what parts you build them with (need Automatron DLC to build a Robot that can be your Companion [to ‘accompany you on your Travels’]), watch the “Carry Weight” Amount as you choose parts
  • It is “ok” to Drink ‘the regular Water that is everywhere’, it will still heal you a little; it is just Irradiated and causes some Radiation Exposure. If you have a container such as an Empty Bottle or Milk Bottle, you can also fill these containers at Streams or other bodies of water, to Cook with

Don’t totally ignore Cooking (although you totally can, if you want to). Cooking various icky parts and gooey bits that you find in The Commonwealth not only heals you, most of the Recipes also give you ‘Buffs’ – temporary increases in various Stats – and things like Breathing Underwater or the ability to Carry More… Cook All The Things!

  • The RED Bar in your Health Bar (that is normally GREEN) is the level of Radiation you have acquired. It ‘takes up space’ in your Health Bar, because you cannot be “100% healthy” with Radiation Exposure (it must be removed with RadAway or by a Doctor at a Clinic (for a small fee))
  • The Water Pumps that are built at Settlements give ‘Pure Water’ from underground (it counts as “Purified Water” as it comes from underground where it has been protected/filtered from radiation by the land/ground, similar to how it would be IRL). The Water Pumps can be drunk from directly (like a Water Fountain) or the water can be bottled to drink later (if carrying empty bottles/etc); you don’t have to go all the way back to The Vault to get “Pure Water” [something I was doing in Survival Mode all the time]
  • To Build in a Settlement, go up to the Workshop Bench (always ‘mostly red’ colour, with ‘tools’ on it and usually located Centrally in the Settlement) and Activate it. If you are “Allied with the Settlement” (helping them out or have already helped them out by Completing a Mission for them) it will open Workshop Mode
  • To Scrap in Workshop Mode (to ‘break down an item/weapons/armor into Components you can use for Building Materials), look at it (drop it on the ground if you are carrying it) and hit SCRAP. Walk around a Settlement as soon as you can utilize Workshop Mode, looking for anything that you can Scrap in the area, for use as building materials. The items you Scrap all get ‘broken down’ into Components, which are the building materials themselves, the ‘things you construct other things with’ – everything being stored in the Workshop Bench itself as Inventory

You do not have to Scrap everything ‘manually’/’one at a time’. Just STORE or put Junk Items in the Workshop Inventory (‘trading with the Workshop Bench’, called “Transfer”) and when you want to Build something, the Workbench calculates if you have enough Junk Items to break down into enough Components to build with. It will show what you want to build as GREEN if you have enough estimated building materials to construct the thing you are trying to build. (You may also need certain Perks to build some things, watch the Requirements list)

  • People can ‘steal’ your Power Armor… Raiders can Steal your Power Armor if they come across it in The Wasteland, for example. Settlers can even take Weapons out of nearby Crates/Containers to use, when attacked. To avoid losing your Power Armor, take out the Fusion Core from the Power Armor (“Transfer”) when leaving it, so that it cannot be used by anyone else (it is like ‘taking the keys out of your vehicle’) [NPCs don’t seem to carry/use Fusion Cores on the Armor]. However there have been stories of cases where Settlers will take a Fusion Core out of a container in a Settlement and throw it in a nearby Power Armor Suit and run off with it to Defend the Settlement! Crazy. Although most of the time, the Settler will simply ‘get out’ of your Power Armor after the Settlement is Defended – still, take out Fusion Cores from your Power Armor when you leave it, so that noone (for the most part) can take your Power Armor and you can always find it where you left it.
  • If Items and Containers around you are ‘glowing green’ or looking like they have ‘pip-boy radar on them’, this is a result of the Highlighting from the Scrapper Perk. Any items that you ‘Tag for Searching’ for (eg. when trying to Build something and you didn’t have enough materials, you can “Tag the Components for Search”) will have this GREEN highlighting when the Pip-Boy detects you are close to an Item in the world that is made up of that type of Component (eg. Steel or Plastic).
    To turn this OFF, open the Pip-Boy and go to the Junk page in the Inventory tab, and change to component view by clicking on the Component View button at the bottom (‘C’ on PC).
    Then in this view, go through the Component types and clear the Tag For Search by doing it again on the Component type.
    Then, your ‘Highlighted view’ from the Scrapper Perk is turned off and Items and Containers will not ‘glow green’ around you anymore

  • Speaking of glowing green, unless you want your vision to be green-ish and REALLY BRIGHT every time you crouch (Sneak), don’t get Night Person Rank 2 (Perk). Although the Perk does state that you’ll get “Night Vision when you Sneak”, unless you really want to be able to see really well (and slightly green-ish) in the dark or when you Sneak, hold off on Rank 2, or watch some videos on it first, to see what it looks like. [To some, the Bonuses are worth it – and they don’t mind the way it looks – but personally, I did not like how the Night Vision worked/looked; and since Rank 2 of the Perk and the Vision are tied together (you cannot have one without the other), I personally avoid Rank 2 of the Perk, for now]
  • If you Exit the game (in any way except using ALT+F4), the game will Save your progress as an “Exit Save”. Then, when you start up the game again and Load the Exit Save, it will [should] Delete that Savegame. Note that if you try to Exit the game with the Pip-Boy up, the game cannot Save your progress when you Exit to the Main Menu or the Desktop (be careful in Survival Mode!)

  • Don’t forget to periodically see what Upgrades you can perform on your Weapons (to do more Damage) and Armor (to withstand/absorb more Damage) at Weapons Workbenches and Armor Workbenches. Some Modifications require Perks to ‘know how to do them’; check the Requirements as you go through your Weapons and Armor, to see what you need to make them better
Tip: If you are having trouble killing things, look for ways to improve your Weapons to do more Damage and your Armor to protect you from it – with Modifications at Armor and Weapon Workbenches! Also, the further South/East you go, the harder (higher level) enemies you will face. Tread slowly, go back over areas you have been, to see if anyone has ‘moved in’ and left items/money around. Stick to the ‘NW’ as long as you need to (especially in Survival Mode)…

Speaking of Killing Things, here is how to utilize the Suppressor (the Weapon Modification attachment that actually works really well in the game; but it is more ‘realistic’ than ‘silent’…).

Note: Knowing how to attach a Suppressor to your Gun requires the skill/knowledge, represented by needed the “Gun Nut” Perk of different Ranks (needing Rank 2 for attaching a Suppressor to Pistols and needing Rank 4 for attaching a Suppressor to Rifles)


Here are some Tips for shooting enemies (even groups) with a Suppressor on your gun:

– Shoot from a distance
(the Suppressor reduces sound, but is not “Silent”, just like IRL)

– Headshot for instant kills
(most of the time, aim manually to help this, as the chance to miss is always present in V.A.T.S. With good aiming, that single shot can always be spot-on)

– Stop attacking your enemies for a moment
(they will look around at first of course, but if you don’t move and don’t shoot, they will not know what the hell is going on and if you wait longer, they will eventually even stop looking “thinking it was the wind/rats/etc”)

– Repeat, killing the second enemy, and so on…

Try to remember that if you shoot too frequently, they can hear the direction (suppressors aren’t silent, just like IRL) or can see the puff of smoke or something, because they eventually figure out where you are BUT ONLY if you keep shooting when they are Cautious and looking for you. If you stop shooting when they are looking for the source of the sound/attack, you will be ok. Remember, “low and slow…”.

  • Weapon And Armor Attachments (Modifications made to Weapons and Armor at Workstations for each) can be taken off of Weapons and Armor you find and put on your own favourite pieces/items… As an example, take a ‘Weapon you found on a Raider’ to a Weapons Workbench and choose a lesser attachment/modification than what is present on the item. In this example, if you want a “Hardened Receiver” that is on a Weapon you found, choose one further ‘up’ the List of Modifications, such as a “Standard Receiver” and ‘build’ it on the Weapon you found; then you will be changing the Attachment and receive the “Hardened Receiver” Modification in the form of a small box ‘kit’ in your Inventory that you can then use on your own Weapon! Simply go back to your favourite gun at the same Weapons Workbench and see if you can put the new Weapon Mod (“the Hardened Receiver” with higher damage output) on your favourite gun
  • If people around you are glowing (looking, for example, red or green) and look like they have ‘lines through them’ as well, you may have a helmet of Power Armor that has the “Targeting HUD (Heads-Up Display)” on it as an Attachment/Modification. This effect is visible even if it is only active on a Companion’s Power Armor Helmet. Simply remove or change the Targeting HUD Modification of the Helmet at any Power Armor Station, to disable the effect.

[……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful – especially new players to the game….. Have fun with Fallout 4!]

Workout Anytime on FOX 19

Workout Anytime on FOX 19

Tony Petrocelli from Workout Anytime was recently featured on a segment on FOX 19 in Cincinnati. The segment is about what women do wrong while working out. Tony then talks about the locations and mentions that there are franchise opportunities.

Cincinnati News, FOX19-WXIX TV

You can view the full segment here.

Quick Tip: NVIDIA ‘In Game Overlay’ Stopped Working? Here’s How To At Least Get It Going Again [Fix / Workaround, Updated 2018-03-26]

Whether it wants to be called Shadowplay, Share or [as of the time of this post] In-Game Overlay; it doesn’t really matter to most people I think – we just look for something to record our gameplay once in a while, maybe take some Screenshots, ‘and just work’. Thankfully, NVIDIA’s In-Game Overlay [or whatever it may be called by the time I finish this post, heh] does just that. Most of the time.

Although I rotate between a handful of different recording programs off and on (such as Bandicam, Action, Playclaw and others – just for fun and also slowly working on another ‘Game Recording Comparison’ for the future), In-Game Overlay [built into the NVIDIA Drivers, aka “for free”] records when I want, it records a Buffered Loop (a timed, re-recording of ‘the last xyz seconds’, to save when needed) – and it even takes Screenshots and more. However, sometimes this big fella has just ‘stopped working’ lately. No saving Screenshots, no Recording, no Error Message, Nothing; and I wasn’t sure why… After only a tiny bit of Troubleshooting, I quickly figured out how to at least ‘get it going again’ and I just wanted to share that here for you all, in a Quick Tip™.

To be honest [I always believe in being completely honest], I am still not sure why NVIDIA’s In-Game Overlay stopped working – but I did figure out how to simply get it working again – and here’s what I did:

  • Once I noticed the Overlay wasn’t taking Screenshots, I looked to see if the Overlay itself or more of the (many) NVIDIA utilities were still running, in the Task Manager. They were. [The In Game Overlay’s Executable is still called “NVIDIA Share.exe”, btw]
  • Thinking that something might have gone wrong with the Overlay utility, I opened up NVIDIA’s GeForce Experience.
  • In GFX [my accro.], I clicked on the ‘gear’ in the upper-right corner, “Settings”.
  • In the Settings area, I clicked on the switch/toggle for In-Game Overlay.
  • Although it took longer than normal, it eventually turned Off. Clicking it again, it turned back On.

That’s it! After those steps, the In-Game Overlay was working once again. Taking a Screenshot, for example, the notification from the Overlay came up, and the Screen was saved. It also started Recording again, without issue. Here is a ‘Tutorial Image’ of the steps to take:

Tutorial Image of what steps to take to ‘restart’ the NVIDIA In Game Overlay;
the recording utility built into the NVIDIA Drivers
(Click to see Full Size)

Although I do not have any details on why it failed, I still thought this short ‘tip’ would be helpful for people that might run into this (“shadowplay not recording” or “in-game overlay not taking screenshots”, etc) – so I wanted to share it here. HTH!

Update, 2018-03-26: Just a quick Update, that as of March 2018, I have run into somewhat of an extension of this issue, where GFX is no longer responding to this simple ‘toggle’ of the In-Game Overlay… Doing so (which used to temporarily ‘fix’ the issue above), now merely results in an ‘error’ message box, stating “That Didn’t Work. Try Restarting Your System.”, which although polite, is not very informative as to what caused the error or what else can be attempted to isolate/troubleshoot the issue further:

Doing some more research online, I see many others running into this issue, as well as its’ ‘extension’ here… However, there still is no absolute ‘fix’ for this problem yet [at least, none that is verifiable and repeatable, which I prefer to have as a qualification to my sharing it here as a “fix”] – therefore, I cannot say for certain what can be done to fix it, even though a wide range of things have somewhat worked for others (some early steps work, others must use further steps), such as:

  • Uninstalling/Reinstalling GeForce Experience
  • Installing an older version of GeForce Experience
  • Utilizing a third-party ‘drivers uninstaller’ to completely remove NVIDIA’s GPU Drivers and Reinstall NVIDIA’s GPU Drivers/GeForce Experience [AMD users can get a similar utility directly from AMD]
  • Reinstallation/Formatting of entire system (eg. Windows) and Reinstalling NVIDIA GPU Drivers and Reinstalling GeForce Experience

Once I find out what actually is a solid fix for this issue, I will state so here and post it in big, bold lettering [lol], along with a Tutorial Image (text on an example image of the solution, etc). Until then…

Chronic Illnesses and Diet part 2

Chronic Inflammatory Illness and Insulin Resistance

Allowing for the fact that genetics affects an individual’s susceptibility to disease, the roots of chronic illness often lie in deficiencies of various nutrients, other dietary issues and hypersensitivity to foods and environmental factors, such as toxins. Whichever of these factors apply to you or your family, insulin resistance may be the easiest to recognize and correct. When you have this condition high levels of insulin, created by frequent intake of carbohydrates, spill over into biochemical injury that makes whatever you have worse. This can include asthma, eczema, colitis, depression, headaches, psoriasis and much more.

What is common to all of these problems is inflammation. Whether you’re looking under the microscope or studying its basic chemical reactions, inflammation is the same, wherever it’s found. Chronic cough and mucus; sore, swollen, stiff joints; cramps and diarrhea; a chronically red, itchy rash; or periodontal disease — all are inflammation. Even cardiovascular disease, which used to be called hardening of the arteries and is now called atherosclerosis, is recognized as a fundamentally inflammatory process.

Diet Start

The first step in the biochemistry of inflammation is the release of informational substances from injured cells that attract the attention of healing mechanisms, the way a phone call to the automobile club brings you roadside assistance. The aid mobilized by these cellular calls for repair work is usually limited to the immediate task at hand; it’s designed for mending a cut or recovering from a burn or fighting infection. But if the agent causing the inflammation persists or if something goes wrong with the signaling mechanisms involved in the call for help, the repair work and its accompanying signals (pain, swelling, redness and heat) may become stuck, leaving you with a chronic inflammation. Chronic inflammatory diseases are often described by medical terms that end in Itis’ and ‘,psis’.

Because the signaling mechanisms involved in chronic inflammation may be distorted by inappropriately high insulin levels in your body, this is something over which you have control. Controlling insulin levels through appropriate dietary changes, including reducing carbohydrate consumption or shifting most consumption of carbohydrates to the later part of the day, will result in a positive effect on the biochemistry of inflammation. Although this dietary change is not directed at a specific disease, it should be part of any comprehensive treatment since it is aimed at easing the predictably disordered chemistry of anyone with a chronic inflammatory illness.

Medications that simply squelch the inflammation may not always be the best course of treatment. Granted, there are instances in which the cause is long gone but the body has gotten stuck in some kind of inappropriate reaction. In these cases, subduing the symptoms temporarily may work. But it’s different when it comes to the daily, long-term application of steroid creams or the consumption of systemic steroids or anti-inflammatory drugs. These treatments have some fairly dreadful gastrointestinal side effects, including the tendency to create leaks in the intestinal walls that allow the entry of unwanted toxins, chemicals and allergens into the bloodstream.

The Body Clock Prescription for Treating Chronic Illness

Chronic illness makes you listen to your body. The message is not so precise that you know exactly what to change, unless of course it’s something like chronic cough in a smoker. Most of the time, chronic pain or other signs of inflammation don’t announce their cause. They demand that you do some detective work, presumably with the help of a professional who has good instincts and expertise at reading your body’s communications by carefully listening to your story, interpreting laboratory tests and then making educated efforts at trial and error.

Anyone with a chronic illness has to be especially aware of the second Tacks Law: if you are sitting on two tacks, removing only one does not necessarily make you feel 50 per cent better. This means that insulin resistance is just one of many manageable factors that may also include improving other aspects of nutritional status and looking for the trigger, irritant, allergen, toxin or germ to which your body may be responding.

Doing the detective work required to find underlying triggers of a chronic illness may take a long time; nor is it always successful. As a more generalized strategy, the ten steps of the Body Clock Prescription will not only prevent or tame insulin resistance, a major contributor to chronic illness, but will reinforce healthy body rhythms and foster rhythmic integration. Remember that flexibility is your body’s treasure; it enables you to be more like an orchestra, with its constant active effort to stay in tune and on beat, than a mechanical system. The same flexibility that allows you to fall victim to the negative effects of poorly timed eating, breathing, exercise or exposure to light also permits you to use such influences for your benefit.

Tune Into Technology Linky: Integrating Technology into Reading

I’m excited to be linking up with iTeach 1:1 and Learning to the Core for their new series Tune into Technology. This week’s topic is Integrating Technology into Reading, so I wanted to share 5 strategies I use to do this.

1. Let kids annotate their reading with GoodReader.



I’ve talked about this app before, but it’s one of my favorites. GoodReader allows you to annotate pdf documents. I use it for almost all of my professional reading, and I’ve converted several documents into pdfs for my students as well. It’s a fantastic tool because my students are able to leave “think marks” all over their reading, and I don’t have to worry about them writing in a book or leaving sticky notes everywhere. We’ve even developed our own codes for how to use the annotation tools.

2. Share favorite books on KidBlog.

My students LOVE sharing the books they’re reading on KidBlog, and they especially love reading and commenting on each other’s blogs. I’ve talked more about how we do this in a previous post.

3. Create Book Trailers in iMovie.

Some of my students began doing this for fun at the end of the school year when we became a 1:1 iPad classroom, and I will definitely be doing this more next year. iMovie has some great templates built-in for this, and my students loved being able to share their favorite books through this medium.

4. Create book clubs and discussion groups on Edmodo.

We started using Edmodo at the end of the school year, and it was a great way to get conversations started or keep them going about the books we were reading in class. You can read more about getting started with Edmodo in my paperless series here.

5. Use Evernote and GoodReader to assess reading.



I use the running record templates from the Reading & Writing Project at Teacher’s College. Because they’re pdf files, I can annotate them in GoodReader, and I can record students while they’re reading in Evernote. I’ve written a complete tutorial on how to do this here.

How do you integrate technology into reading instruction in your classroom? I’d love to hear your ideas. And be sure to link up with the Tune into Technology linky!

And don’t forget to join us for the Southeastern Blogger Meet Up. Click the button below to get the details and RSVP!

Giveaway Winner!

I had so much fun seeing what everyone posted in the Teacher Toolbox Trio linky. Thanks to everyone who linked up.

I went to the Random Number Generator this morning, and drumroll…

I’m excited to announce that Stephanie Ann from Sparkling in Kindergarten was the winner of the $25 Teachers Pay Teachers gift certificate. Congratulations, Stephanie Ann!

And welcome to all of my new followers! I have lots that I look forward to sharing this summer.

Have a great weekend!

Multi-Protocol Label Switching (MPLS)

Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

Internet 2010

When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

Combining Routing and Switching

Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

My recommendation: The 3-step dietary programme Do what I did, look the results

The dietary plans that follow offer simple, nutritious and delicious recipes on a staged regime that should take you from overweight to optimum weight and enhanced well-being.

The reason many people depend on junk and convenience foods is because they lead such busy lives. Most of the recipes in these plans are quick to prepare, and should be within the capabilities of even the most reluctant cook. There are exceptions: preparing the Chicken Soup will take a couple of hours, but it makes a lot and you can freeze separate portions, ensuring that you can have a nutritious low-carb meal even when the clock is ticking away.

So blitz your cupboards and discard any foodstuffs that don’t fit the bill. The journey to a healthy, lean body begins here.

The Plans

The 3-step programme includes 3 eating plans. The Fast-Track Plan will help you lose weight quickly and give you that all-important boost on a 50 per cent protein/20 per cent carbohydrate/30 per cent fat regime that will initiate benign dietary ketosis. It should last for 7-21 days, after which you are ready to move on to the next stage. Your weight loss should be around 2-5.5kg (4-121b) if you are a woman and 4-7.25kg (8-161b) if you are a man, depending on how long you remain on this plan.

Diet Start

During the Keep on Tracking Plan you increase your levels of low-tomedium GI carbohydrates and move into a 35 per cent protein/35 per cent carbohydrate/30 per cent fat regime. You still monitor ketosis and watch how introducing higher levels of carbohydrates affects your weight loss, which should now even out to 0.25-1 kg (1/2-21b) per week.

The No Backtracking Plan is your eating regime for life. You can gradually introduce fruit and vegetables, grains and pulses from the higher GI ranges, in moderation. It is important to keep an eye on how your body reacts to these and to establish your perfect weight-management level.

If you are a vegetarian, there is plenty of advice on how to adapt the plans and recipes to suit your dietary requirements. Granted, your choice isn’t as varied as that of a non-vegetarian, but don’t use this as an excuse not to give it a go. If you follow the basic guidelines and make simple changes to the recipes where necessary, you should lose weight and eradicate insulin resistance successfully.

FOOD TO THROW OUT

  • White flour and sugar
  • Honey
  • Biscuits
  • Crisps
  • Sweets
  • Sugary drinks
  • White rice, bread, pasta
  • Processed foods high in carbohydrates
  • Ready-made sauces
  • Gravy mixes

Customize the plans to suit your lifestyle and dietary preferences

The suggested menu plans are not set in stone – they are templates to encourage you to eat the right sort and amount of food.

If you wish to change a recipe – because you don’t like lamb and would rather have chicken, say – it really doesn’t matter. Just try to use foods of a similar dietary value. When swapping vegetables and fruit, go for ones in the same GI category; try to exchange meat for meat, or fish for fish, in the same amounts. If you change a recipe from meat to fish, you may need to use slightly more fish to give you the same level of protein. For example, 125g (4oz) of poultry or lean meat should be replaced with 175g (6oz) of fish.

Simplify the recipes

If you are short of time, or like your food a bit plainer, simplify the recipe. If you don’t fancy Baked Tuna with Tomato and Herbs, adapt the ingredients, ensuring that you still have sufficient protein, carbohydrates and healthy fats – have a tuna salad with tomatoes and dark green leaves.

On a budget

If money is short and you find some of the suggested ingredients a little expensive, use some budgetary ingenuity to bring down the cost. Fresh salmon can be replaced with coley or whiting, or even tinned salmon.

Use the suggested meals as inspiration. In order to manage your weight in the future, you will have to experiment and be prepared to adapt.

Quick Tip: Guild Wars 2 – How To Split Stacks Of Items

Just a quick tip for GW2 and those of us who were tying to split stacks of things, only to link them into Chat and ‘shout’ the item’s link to people around us, the entire Map, etc. The way to actually sort things in a more private manner, is to hold down the ALT key and then drag the stack of items to an open slot. A dialog box should come up asking you how you want to split the stack of items (as seen in the example below):

Pressing the Shift key, as most know, will link the item in the chat box, and pressing Control, will link it and shout it out in Chat automagically – which is nice and embarrassing. I’ve seen some random linkages in the Chat Box [of things that aren’t of any interest] so I know it isn’t just me! I hope that this helps someone out and saves them from this atrocious “Faux Pas”…

See You In The Games!

My trip to Delhi and Hyderabad cont…………….

Today I finished the 3rd Organizational Capacity Assessment (OCA). The first organization was The National Council of Applied Economic Research of India (www.ncaer.org). The second organization was the Indian Institute of Dalit Studies (www.dalitstudies.org.in). The third organization is the National Institute of Public Finance and Policy (www.nipfp.org.in).

I must say that I have never met a group of such eminent people working passionately as I witnessed in the past 6 days. Most of the people I met for the OCA’s are individually academics of international standing. What struck me most was the passion and the objectivity of their work as well as the humility they show when compared to the major results they have achieved. I wish all not for profit organizations had such an ethos when it comes to measuring there results.

I have to record the results of the interviews conducted over the last few days as soon as I can as I will be traveling to Hyderabad on the 1st. for the 4th OCA. Tomorrow is the only non working day in this assignment but I guess I will be doing the documentation. Hope I get a chance to finish early so that I can go out for the evening.

The 1st of March is a holiday in India (festival of colours) and hope I don’t get splashed with coloured powder on the way to the airport.

Quick Tip: Team Fortress 2 – What To Do With Those Naughty and Nice Winter Crates (Winter 2013)

By now, most of you have seen these Random Drops, Crates that are either “Nice” or “Naughty” – but, “How do you open them..”, you may have asked? Well, this post is just a quick note to answer this question I have already started seeing on game forums and Question/Answer websites. Answer: You Can’t Open Them (Yet)…

Soon hopefully, keys should be available for purchase at the Mann Company Store (Steam/Valve/TF2), most likely for $2.49 USD, if keys and dropped crates combinations of the past are anything to go by [I assume they are dropping them now, to allow people to collect some before the keys go on sale – to sell more keys]. So, if you get these [I have already started getting them when playing, hence the screencaps], just wait a little bit longer, until the keys themselves go on sale. Then, if you want to open them, just purchase keys and unlock them! Soon™… (Remember, you will need one key for each crate)

See You In The Games!

BLACK WALL INTERIORS DESIGN IDEAS FOR A MODERN HOME

Are you brave enough to try a deep impression on the black walls at home? A dramatic effect can be created on the walls of blacks is unique, and it takes courage and commitment to create an interior decorated with beautiful black walls. A black-painted walls, chalkboard walls, elegant black background, or even some black accents can change the look of the interior.

High ceilings and lots of natural light conditions seem to enjoy blacks the walls in my room, but even the smallest spaces can look modern and stylish, if all other elements are chosen to enhance the contrast and the dark walls. Some of you are going to see the inside is a piece of furniture in bright colors and decorations that mitigate the effects of black walls, others will benefit from natural light, some are painted on wood or walls, wallpaper, and applications – but all ideas have two things in common: the courage and well-designed structures.

BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

fantastic paintjob on this speedboat

http://darkdraggon.tumblr.com/page/3

Paperless Mission #8: Conduct and Archive Running Records (iPad)

This is the eighth installment in my Go Paperless! Challenge series. You can see the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #8: Conduct and Archive Running Records 

At least once each six-week term, teachers at my school are supposed to conduct a running record as a guided reading level assessment. We use the Fiction Level Reading Assessments provided by the Teacher’s College Reading and Writing Project, and before my move to paperless, this system was a mess for me. I’d have one binder that was all the student copies of texts, and then I’d have a huge paper pile of blank assessments that I could fill in as I worked with students. Invariably, I’d have a ton of kids reading on level S, for example, and I’d run out of my copies of that assessment, so it was back to the copier to make more. Then I’d have to deal with recording the data and filing them all, and it was a bit of a nightmare.

Paperless rocks. The nightmare is over.

In this tutorial, I’ll share how I’m using Dropbox, GoodReader, and Evernote to conduct running records anytime and anywhere on my iPad. You might want to get a good iPad stylus, too, if you like that “pen in hand” feel.

Step 1. Download all of the running records to a folder on Dropbox.

You will also want to print one student copy of each assessment. I still keep all of those in page protectors in a binder so I can hand one over for the student to read off of, but I never make copies of these. It’s a one-time paper expense that I’m happy to live with.

Step 2. Import the guided reading assessments into your GoodReader app.

Once you’re done saving them to Dropbox, open up GoodReader and connect to DropBox. There’s more information about this in the previous GoodReader tutorial, Mission #6.

Step 3. Choose the appropriate level, and open up the teacher copy in GoodReader.

The first time that you want to annotate the document, you’ll be prompted to “Create an Annotated Copy” or “Save to This File.” You will want to choose “Create an Annotated Copy” so you don’t lose your blank copy. Otherwise, you’ll have to download these files every time you want to use them, and that’s only marginally better than running to the copy room — trust me.

Step 4. Use the annotation tools to mark up student reading as you normally would. 

I won’t lie — the first couple times I did this, it felt a little awkward. You have to remember to save the document if you’re switching between tools or trying to scroll/resize. But it does get better quickly, I promise! The more you use the tools, the more fluid your movements will be. It didn’t take me long to get back to the level of proficiency I had with paper copies, and while my writing is a little messier on the iPad, it definitely gets the job done.

Step 5. Rename the file using the manage files option on the home screen of GoodReader. 

To get back to the home screen, tap the center of your screen — away from any annotations — and it should show you the main menu or “My Documents” up at the top left.

Step 6. Move the renamed running record over to the student’s notebook in Evernote.

To get there, go into Manage Files again, and then select Open in. . . 

You’ll be prompted to flatten annotations. Make sure you choose this or your annotations may be lost. 

Select Evernote, and it will launch your Evernote app. From there, you can move it into the appropriate notebook and type in any notes that you want to remember about the student’s reading.

Extra Credit: Create a simultaneous audio file in Evernote.

This is something that I’ve been playing around with lately, and I think the possibilities for this are amazing. Once I have everything set up so that my student has the student copy of the text and I have the right running record file open in GoodReader, I go into Evernote, open a new note, and start an audio recording using the microphone icon. I tell the student to start, and then I use 4 fingers to swipe quickly from right to left across my iPad. This takes me back to GoodReader (or whatever my last open app was) without having to go through my home screen. When the student finishes, I use the 4-finger swipe in the opposite direction to pause the recording.

In the end, I have an .mp4 audio file of the student reading in addition to my annotations on the running record. This is great because it’s evidence I can use in RTI and parent-teacher conferences, and it also enables me to play back the audio so the student can hear him or herself read — something that rarely happens. We can then talk about patterns I’m noticing and ways to improve reading fluency. It’s a great teaching tool.

Your assignment: Try doing a few running records on your iPad and leave me a comment about how it’s going. I’d love to hear other ideas or suggestions to fine-tune this process, too. I’ve only been doing it for about 6 weeks, so I know there are things that could be improved. Hopefully this is enough information to get you started, though!

Thanks for reading!

Trip to Hyderabad cont…..

The assignments are over and I am on my way home. The drive from Chilakaluripet to Vijayawada was uneventful; so was the flight back to Hyderabad. I had arranged to be picked up and was met at the airport; the drive back from the Hyderabad airport to my guest house was not usual as the vehicle I traveled did not have air conditioning. So my senses were overloaded by the melting pot that is India; the sights, the sounds and the smells greeted me along the way to my guest house. The only disconcerting factor was the pollution levels. The smoke from the vehicles combined with the dust that they kicked up hung as an orangish grey cloud over the city. There were times that I found it difficult to breathe so had to cover my mouth and nose.

On reaching my guest house I packed all my bags and turned in for the night as I had to get up at 3.30 AM to start my last leg of the journey. Before turning in I had spoken to the driver who was supposed to drive me to the air port in the morning. As a matter of caution I obtained his mobile number for contingencies. He faithfully promised to be there at 4.20 AM to drive me to the airport. The plan was that I had to be at the airport one hour before (Domestic flight from Hyderabad to Chennai) and it took one hour to drive to the airport.)the scheduled time of 6.20 AM

The next morning I was ready by 4.20 and SMSed the driver; then came 4.30 still no driver. I got a bit concerned since we had not planned for any delays. So I went to the security post of the compound and hailed the security. As usual the security guard was huddled up in a corner of the security hut fast asleep. I woke him up and found that he did not speak a word of English. So using sign language and my broken Hindi/Urdu managed to convey the situation to him; finally he got on his bike (Literally) and went and woke the driver who slept in the other corner of this large compound.

I left for the airport around 4.50 AM and made it on time for the flight. The rest of the journey went as scheduled and without incident. I am back at home; and finishing all my reporting before the next assignment.

Trip to Hyderabad Cont……

Today I am leaving to Hyderabad for the assignment. Funny, there seems to be a lot of things that we do when doing an overseas consulting assignment but don’t really talk about it. The stuff we do for preparation has two parts

Things considered as part of consulting process
Marketing, prospecting and selling
Proposal, budget & contract
Invoicing and receiving advance payment
Preparation / Intake

Things that are part of the consulting process but gets taken for granted
Requesting Invitation Letter to process visa
Applying for visa
Travel & Medical Insurance
Foreign Exchange
Transport to and from Airport – in your country and the country you are visiting
Travel advice regarding security, weather etc

I addition it is up to the consultant to find out about interesting things in the city s/he visits. In my experience some assignments will give you a bit of time in the evenings and it can be boring to be stuck in a hotel all the time. Suggest the web or lonely planet for this.

Also rule of thumb is exchange a bit of money at the airport itself. Trust me you will spend more time and money in trying to look for better exchange rates.

Low-carb lifestyle guidelines

By now you should have a pretty clear idea of what you have to do to improve your diet and, with it, your entire lifestyle.

The general principles

Cut out all unhealthy refined carbohydrates.

  • Curb your intake of high GI carbohydrates and focus on those from the low—medium GI range.
  • Eat most of your fruit and vegetables raw to ensure a good level of phytonutrients and fibre.
  • Eat more high-quality protein — organic if at all possible.
  • Increase your intake of healthy omega-3 fatty acids by eating more oily fish, and use only natural unrefined oils in your cooking.
  • Cut out tea, coffee, concentrated fruit juices and alcohol, and banish soft drinks of any kind, but drink at least eight glasses of water per day.
  • Incorporate 30-45 minutes of aerobic exercise at least three times in to your weekly routine, and carry out resistance training at least three times per week.

Diet Start

DIETARY MYTHS

Myth: skipping meals is a good way to lose weight.

Fact: your body needs a regular supply of nutrients each day in order to work properly. If you skip meals, you will be more likely to make up for it by snacking or eating more at the next meal. Studies show that people who skip breakfast tend to be heavier than those who eat a nutritious breakfast. A healthier way to lose weight is to eat many small meals throughout the day.

Myth: eating after 8 pm causes weight gain

Fact: it doesn’t matter at what time of day you eat; if you are eating too much of the wrong type of food and not getting any exercise, that will make you fat.

Are you all fired up?

You should be, because you are going to get back in control. You now know what you are doing, understand your body and should look on this as an important project that will bring untold benefits. Now that you understand how your body metabolizes the food that you eat, you can start to view food as a vital fuel that helps your body function at optimum levels. This should be a turning point. It should change your attitude from one of ‘Oh no, I’m on a diet’ to a more positive ‘I’m doing this for me, to make myself healthier, fitter, stronger, leaner’.

Pretty soon you are going to be feeling and looking better. Think of that boost of self-confidence that you are going to experience. So get ready to roll and flex that determination. Whether you have 3kg (71b) to lose or 30kg (701b), this regime is only going to work if you are committed to changing your eating and exercise habits for life.

The rest of this section offers advice on weight, and on setting goals for (and managing) weight loss; suggests how to cope with the cravings and snack attacks that may arise when you are on a diet; and gives tips on taking supplements and sticking to a healthy diet, even when you lead a busy lifestyle. It is followed by the three-step programme and nutritious recipes that form theMainstay. Plus, there is also a section on adapting the plans to suit a vegetarian diet, which includes some delicious low-carb vegetarian recipes.

DIETARY MYTH

Myth: low-fat or non-fat means no calories. Fact: many low-fat and non-fat foods still contain a lot of calories. Often these foods also contain extra sugar, flour or starch thickeners to make them taste better. These ingredients all represent extra carbohydrates. As we have seen, you need to eat healthy fats to lose extra fat.

Kaatsu aka Blood Flow Restriction Training

Kaatsu training was developed in Japan five decades ago.  Ka means “additional” and atsu means “pressure.” An English layman’s term for the practice is “blood flow restriction training,” and involves performing strength training exercises while restricting blood flow to the extremity being worked.

A significant benefit of the method is that you can use just 30 to 50 percent of the weight you’d normally use while still reaping maximum benefits of resistance training. You use less weight but do more — up to 20 or 30 repetitions versus 8 or 12 in most traditional strength training programs.
Cuffs or bands are used that are just tight enough to allow arterial blood flow but not venous flow. This causes lactic acid and other waste products to build up, giving you the same benefit as heavy lifting without the dangers associated with heavy weights. For this reason, it’s a great strategy for the elderly and those who are recuperating from an injury.

Scientists believe that restricting venous blood return can dramatically boost growth hormone secretion, reducing myostatin and inducing cell swelling.    Even better there is less overall tissue damage compared to traditional high intensity resistance training.

History of Blood Flow Restriction Training

The history of this type of training was detailed in an Outdoors Online Article (https://www.outsideonline.com/2023016/you-should-probably-try-japanese-blood-flow-routine):

“Kaatsu came about in 1966 when 18-year-old [Dr.] Yoshiaki Sato, now a doctor, noticed the intense ache in his calves after having assumed the traditional Japanese sitting position during a typically long Buddhist ceremony. It was an ache much like the one he experienced after lifting weights — an ache he realized had to do [with] the occultation of blood circulation.
Eureka! Using himself as a test subject, Sato spent the next several years perfecting a system of blood-flow moderation using bicycle tubes, ropes and straps. He later replaced the tubes with thin computer-controlled pneumatic bands. The idea was to apply pressure around the arms and legs while lifting a light load, safely impeding the flow of blood to exercising muscles.
Slowing this flow engorges the limbs with blood, expanding capillaries, engaging muscle fibers and raising lactic acid concentration. But — and here’s part of what makes Kaatsu unique — it fools the brain into thinking it’s being put through a vigorous workout.”

Kaatsu training can stimulate muscle growth and strength in about half the time, using about one-third of the weight, compared to regular resistance training.

How does Kaatsu Work?

The concept idea behind blood flow restriction training is to restrict blood flow in an exercising muscle/s using a band around the upper portion of the arm or leg being worked. This creates a metabolic disturbance that has local and systemic effects:

1. A reduction in the partial pressure of oxygen and increase in the acidity of the muscle tissue stimulates protein synthesis through an adaptive response to the stressor.

2. The central nervous system also senses the challenge and compensates by increasing sympathetic tone, heart rate, ventilation and sweating.   There is also an accentuated hormonal response as mentioned previously.

Kaatsu also stimulates mTOR signaling and lowers myostatin (myostation stops muscle growth!)
Unexpectedly muscle growth occurs both sides of the cuff even though blood flow is only restricted on the side farthest away from the heart.    The systemic increase in Growth Hormone also drives overall muscle growth.

How much Pressure?

It is important not to restrict blood flow too much, as this could lead to injury and fainting.
The good news is that research shows that if you use common sense the risk of using too much pressure is easy to minimize.  Your limb should not be tingling, turning red, blue or purple, and you should not lose feeling and should be able to feel your pulse in the limb.
For a great quick start guide to Kaatsu click here:  https://www.kaatsu-global.com/quick-start-guide-001/
Kaatsu Training Protocol

A typical training session uses three sets 0f 20 – 30 repetitions per set. use half or less of the weight you’d normally use. Rest between sets is short with typical rest time being 30 seconds.

Could Kaatsu Cause Injury such as Deep Vein Thrombosis?

Kaatsu is NOT the same as putting a tourniquet on and if you follow proper precautions is quite safe.    The key is that Kaatsu does NOT alter arterial blood flow as described previously.    It is important to use cuff’s designed specifically for this process.
Contraindications for Kaatsu

  • Women who have had a mastectomy with or without radiation and/or an axillary node dissection should not use blood flow restriction training.
  • People in hemodialysis who have arterial venous fistulas. Avoid doing blood flow restriction on the affected limb
  • Pregnant women should not use Kaatsu training.

1948 Packard woody station wagon and matching teardrop trailer

https://silodrome.com/packard-eight-station-sedan-teardrop-camper/

Tips For Rustic Dining Room Setting

The Rustic look is a perfect balance of masculinity and femininity. You take the simple and unsophisticated woodsy elements of country living and add a feminine touch by complimenting and giving each piece a voice.

Rustic Dining Room
Rustic Dining Room
Rustic Dining Room
Rustic Dining Room
Rustic Dining Room

Keep your walls and furniture light in weight and color, unfinished and whimsical in nature. Think bare essentials, and the more imperfections the better!

With dark wood or contemporary dining furniture you can transform the style with a nice weathered look by sanding it lightly or painting it a creamy pastel color first and then sanding it.

Add textural interest with a soft faux finished wall, an antique area rug, or by stenciling a simple pattern on the doors of your hutch and/or buffet.

If your resources are limited you can use whatever furniture you do have and accessorize with rustic objects. Throw a handmade crocheted or lace tablecloth over a buffet for an authentic touch or hang dried flowers in artistic way on the wall.

It’s OK to mix old with new objects like taking a colored glass bowl and filling it with acorns or pine cones. You can also fill a ceramic vase with wildflowers and set it on the dining table for a rustic tone. Just remember, thoughtful simplicity is key…

The 1 Minute Workout

The number one challenge people to give to not working out is time.   So the question fitness professionals should be focused on is what is the LEAST amount of time for working out and still producing the benefits and results that people want and need.
The great news is that there is a lot of well done research on this subject, and there is a proven workout protocol that produces results with as little as one minute of total work time in a workout and a total workout duration of under 10 minutes including warm-up and cool-down.
The definitive work on this subject was written by Martin Gibala and is appropriately called “The One Minute Workout”.     In this excellent book he reviews all the related research and results on High Intensity Interval Training including an excellent review on the psychology of exercise as it relates to how people feel before, during and after different types of exercise protocols.     Long story short people really like certain HIIT protocols – even high deconditioned people and high-risk heart disease patients.
He and his team of researchers proved the effectiveness of the 1-minute workout to produce results and also found the specific physiological mechanisms responsible for the benefits of this protocol.
1 Minute Workout Protocol

Warm-up for 3 minutes at an easy pace on any piece of cardiovascular exercise equipment, walking, 
running, jogging or cycling depending on your preference and fitness level.
Do a 20 second sprint at your best possible pace (this is all relative to your fitness level)
Do active recovery at a light pace for 2 minutes
Perform another 20 second sprint at your best possible pace.
Do active recovery at a light pace for 2 minutes
Perform a third and final 20 second sprint at your best possible pace.
Cool-down for 2 minutes.
Total workout time – 10 minutes!
Frequency

Best results are obtained by repeating this workout 3 times per week BUT even once a week will provide benefits and help maintain a decent level of physical conditioning – the key is intensity NOT duration or frequency.

Recommended Reading:    The One Minute Workout by Martin Gibala:  https://www.amazon.com/One-Minute-Workout-Science-Smarter-Shorter-ebook/dp/B01IOHQ7RA/ref=sr_1_1_twi_kin_2?s=books&ie=UTF8&qid=1517152066&sr=1-1&keywords=the+one+minute+workout+by+gibalaAvailable in hardcover, paperback or kindle.

Paperless Mission #12: Collecting Student Work

This is the twelfth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #12: Collecting Student Work

Recently, I shared how I distribute student assignments through Dropbox. Today I’m going to share how students turn in those assignments. To do that, I primarily use Edmodo.

Once you’ve created an assignment in Edmodo, students will be able to see it as they log-in.

If it’s just a text-based assignment, they can type the text in the comment section and submit it.

Often, however, my assignments tend to require them to include an attachment of some sort. These can fall into a couple different categories.

Photos & Movies

The Edmodo app allows you to load photos directly from your camera roll as an attachment. Just select “Attach: File.”

Documents produced in other apps (e.g., Pages, Keynote, etc.)

This process has a couple extra steps, but it’s still easy to accomplish. First, students will need to load the item into their backpack. This is normally accomplished through the “Share and Print” option in the original app. For example, in Pages, you have the option to “Open in Another App.”

This will result in the file being added to the student’s Edmodo “backpack.” Once it’s there, students can attach it to an assignment by choosing “Attach: Backpack.”

Once the items are selected, students get to rate the assignment using the emoticons and click “Turn In Assignment.”

From my perspective, it’s a dream. I don’t have to worry about receiving “No Name” papers, and I can quickly grade and comment on student work that’s turned in.

Apprentice Guides

One of my back to school projects is to make step-by-step tutorials to help students (and teachers) with some of these iPad tasks. The first one is on Turning In Assignments from Pages to Edmodo and you can download a copy of it here.

I apologize that the image quality isn’t perfect — it lost something when I uploaded it to Google Drive for sharing, but it’s still very functional. (I’ll share higher-quality imaged versions later when I get more completed.)

What programs do you use to collect student work electronically in your classroom? I’d love to hear in the comments section.

Quick Tip: Heroes Of The Storm 2.0 – Where To Choose Skins, Mounts, Announcers And More [Interface Change]

Yesterday, Heroes Of The Storm “Version 2.0” came out – and along with it a bunch of changes and additions, breathing some new air into Blizzard’s MOBA entry. I have been having fun playing it off and on, discovering the changes and new progression system. I am working on a First Impressions/Overview of ‘2.0’ – but before that, I wanted to quickly make a Tip about something I am seeing a lot in the General Chat in HOTS: people asking how to change the Announcers, Mounts, Skins and other new additions, as the new UI has changed things a bit…

In 2.0, right away you will see that things have changed, as the Main Menus themselves have moved around and information is in different places. For example, the Shop link/text at the top of the screen is gone:

Here is where the Skins, Mounts, Announcers, etc can be located now:

The Loadout button (first one on the bottom, far left) has combined the “Heroes” and “Mounts” buttons and now holds all of the settings for the currently selected Hero. Here, you can choose the Skin, Mount, Announcer used and other new additions via the sections within the Loadout (you can even save Presets of combinations you like). 

Here is a 60-second tutorial showing where it all is, in Heroes Of The Storm 2.0:




That’s it for this Quick Tip – it was just something fast because I have seen it asked a lot in the General Chat lobby lately – have fun in Heroes 2.0!


BEAUTIFUL INTERIORS STYLE FROM SHH

SHH is a London-based company, founded in 1992. Interior design is not their only strong point that the company also makes architectural projects. But now we want to show you how a room can be transformed into an elegant and modern in their vision.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

We collected up to 15 different interiors that stand out and can become a real source of inspiration. We deal in the living room, bedroom or the hallway of boredom and failed surprising elements are added to create comfortable spaces. White is airy and gives a sense of calm, while the funky food the best and rebels. Color and light is present in some unusual arrangements with excellent results.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

TestRun, Video Edition: Recording Gameplay – Rollercoaster Tycoon 2 (Video Samples with Brief Tutorial Video)

This is a more informal TestRun, where I was merely testing out the perceived quality of some recording codecs while attempting to get gameplay recording of Rollercoaster Tycoon 2 going. As most of you know, recording this game is not just a point-and-shoot affair. Heck, most game recording applications won’t even detect the way it is buffering and utilizing video memory, resulting in a black screen, flashing or very laggy output. After trying years ago and abandoning it temporarily, I was recently searching websites with information on trying it again. With no luck finding a starting point of information, I decided to figure it out on my own – and of course share my findings should anything turn out fruitful…

First, simply trying to record RCT2 with FRAPS and then Bandicam, turned up nothing as a result. Either it would not detect the screen (it is not using 2D/3D rendering/buffering on the videocard in a standard manner) or it would capture blackness (when trying Bandicam’s ‘Record The Screen’, for instance). Since these are two well-made recording products, I assumed other products would result in the same …result. I also seem to remember trying applications like Camtasia, back in the day..

So next, I tried good’ol ‘Virtualbox’. A staple Virtual Machine emulator (think of a little computer-running-inside-a-computer), I installed an old version of WindowsXP that I had into the GuestVM. Installing my DRM-free purchase of RCT2 from Good Old Games, I tried recording the screen. No luck, since it wasn’t using Direct3D in a way that I could record (after I finally got Direct3D working in it). I tried playing it in a Windowed VM and recording that. It wouldn’t even run for some reason. It kept trying to ‘take over’ the VM and resizing it. I tried setting my Host Computer desktop resolution to 1280×720 and getting the game to detect that and run it at that resolution, ‘Full Screen’ and ‘Seamless’. Nope. For one thing, the game kept detecting and making available only the most basic of 4:3 aspect resolutions (CRT monitor type sizes), no matter what driver/settings I used for the virtual machine (I of course wanted the more modern widescreen 16:9 ratio, as YouTube uses).

Third, I tried VMware’s ‘VMware Player’. A free virtual machine app, where the business version (VMware Workstation) is the go-to prog for business virtualization. Installing my XP and then RCT2 into the VM, I got it going in 720p rez and prepared Bandicam to record a “Rectangle On A Screen”. It worked wonderfully. So, with the odd stutter (very few and far between), I can now record RCT2 gameplay and wanted to share my findings of the ability with everyone.

I was also messing around with different recording codecs, to see what they looked like at different settings with this game at 720p. I quickly threw together this little video showing some settings and results (Sample Video). A summary of what I have set up to record Rollercoaster Tycoon 2 gameplay is just below a short analysis of the video/recordings. Again. this isn’t a ‘full/technical’ TestRun, it is just me sharing some tests I did and showing that one can indeed record RCT2. Further down, there is a video that goes over the steps in summary, then in slightly more detail, showing the steps taken on the screen, a short ‘tutorial’ I suppose. For those who haven’t figured it out or got it working yet, perhaps this information will help you out, too. Enjoy!

RCT2 testing (codecs/settings) with Bandicam (Samples)

Recorded with: Bandicam, various quality settings, various codecs @ 1280×720 (720p HD)

Recorded game: Rollercoaster Tycoon 2 (RCT2)

Some recording data (per codec) for this test:

MJPEG @ q80 = 45,000kbps data rate (~330MB per minute of gameplay recording)

MPEG-1 @ q80 = 11,000kbps data rate (~80MB per minute of gameplay recording)

MJPEG @ q60 = 34,000kbps data rate (~250MB per minute of gameplay recording)

MPEG-1 @ q60 = 3,000kbps data rate (~22MB per minute of gameplay recording)

*XviD and x264 are omitted as results for this test as editing/recompression resulted in corrupted video output (they will be included in a future TestRun with many codecs)

Brief analysis of sample video:

  • All of the MPEG-1 settings are quite watchable, unless of course the temporal gibbs effects bothers you (the little ‘ghosty/glimmer’ effects that follow around the peeps). Perhaps if I didn’t mention it, you might not have noticed? As with all recording/editing, if it ‘looks fine to you’, then you can run with it if you want. Some people “need” the best quality possible, some can watch any quality and enjoy it. If the MPEG-1 setting at 80% Quality seemed fine to you, go ahead and use that (it is about 1/4 the size of the MJPEG recordings and I have found that editing MPEG-1 is bit slower but quite possible to do in editing applications such as Sony’s Vegas line of products).
  • The MJPEG at a Quality of 50 percent is watchable but messy looking, as expected since a JPG (MJPEG is a series of JPG frames) at only 50% quality would have tons of compression artifacts. 60% is just as bad, with ‘rough blocks’ everywhere (macroblock artifacting). MJPEG at Quality80 isn’t bad and very watchable, but it is much larger in bitrate usage/file size than say, MPEG-1 at the same quality setting (it is about four times larger in file size). It is the easiest codec to edit, however.
  • XviD, an MPEG-4 codec, can potientially looks a lot ‘cleaner’ as it can handle smaller macroblocks/divisions of the screen (inherent in the improvements in MPEG-4 over MPEG-1) – but the output seems to have strong corruption (it leaves ‘trails’ on the screen) when attempting to edit/recompress it into a final product (as seen in the video).
  • x264, a more recent ‘Advanced Video Codec’ version of MPEG-4, it records in wonderful quality and low file sizes – but all of that is hidden behind, again, corruption (‘trails’ left behind on the screen*) and slow editing.
    (The editing can be helped somewhat by specifying a smaller GroupOfPictures (frames inbetween keyframes/information frames, to help seeking through the video.)
    Keep in mind that for the MPEG-4 codecs, the corruption surfaces only when editing/recompressing the source video. The ‘original’ gameplay recording in MPEG-4 is quite clean and watchable, completely fine if you are just going to ‘record-and-upload’ to a video sharing site or personal website.
    *More on this issue and x264 recording in a future article
  • A full Codec Comparison TestRun is coming, where I test out a bunch of different codecs and see how they fare for general game recording, MPEG-1, MPEG-4, AVC/h264 (MPEG-4 Part-10), MJPEG, XviD, RGB24 and more…

    Some related articles:
    Game recording comparison with various codecs and settings (Minecraft)
    http://gametipsandmore.blogspot.ca/2012/10/testrun-video-edition-fraps-vs-dxtory.html
    The ghosting/blurring effect when rendering in Sony Vegas products
    http://gametipsandmore.blogspot.ca/2012/10/and-more-how-to-stop-ghosting-or.html

There are a couple other ways to do it I think, but here is how I recorded Rollercoaster Tycoon 2 gameplay with Bandicam:

  • Install Windows into a VM Guest (for example, a VMware virtual machine within the VMware Player application)
  • Install RCT2 into that Virtual Machine, running the VM in a window (for example, 1280×720)
  • Set up Bandicam to record a ‘Rectangle On A Screen’ and set the Rectangle to be the same size as the Virtual Machine running in a window (in this case, 1280×720) and line them up. 

That’s it!

Tutorial Video on how to record Rollercoaster Tycoon 2 with Bandicam

I had seen many people on many forums asking for years how to record RCT2 gamplay. I have seen a few videos online now and so some have it working, but if you haven’t been able to get it going or would like to try to make your own Rollercoaster Tycoon 2 videos, here’s how. Good luck with it and have fun!
See you in the games!

Berberine – for Cancer Prevention, Anxiety, Depression, Increased Fat Burning, and More!

Berberine – for Cancer Prevention, Anxiety, Depression, Increased fat burning, and more!

Berberine is a yellow alkaloid found in several plants/herbs such as goldenseal and phellodendron.   It is a powerful plant chemical with proven antibacterial, anti-inflammatory, anti-diabetic, anti-cancer, and immune enhancing properties.    Herbs containing berberine have a long history of effective use and there is considerable science backing these uses.
It is also extremely helpful for treatment of seasonal allergies traveler’s diarrhea, food poisoning, and as an oral hypoglycemic for Type 2 diabetes.

As per Dr. Michael Murray Berberine has been shown to: 
  • Produce results in clinical trials in improving Type 2 diabetes on par or better than conventional drugs including metformin.
  • Improve blood lipid levels better than statins.
  • Lower blood pressure in many subjects as well as any class of antihypertensive medication.
  • Improve liver function and promote anti-obesity effects.
  • Exert significant beneficial effects on digestive health and the microbiome.
  • Produce very encouraging experimental data in a wide range of modern health issues including cancer, Alzheimer’s disease, Parkinson’s disease and others.
How does Berberine work?

Berberine activates adenosine monophosphate-activated protein kinase (AMPK).  AMPK is sometimes referred to as a “metabolic master switch” because it plays an important role in regulating metabolism.

AMPK causes a cascade of effects within cells involved with maintaining energy homeostasis.  AMPK helps shift energy towards cellular repair and maintenance.   It has many of the same effects as increasing exercise while at the same time restricting caloric intake.

Other benefits of Berberine include:
  • Slowing the release of free fatty acids to help prevent harmful fat deposits
  • Promoting insulin, leptin, and adiponectin function for a healthy metabolism
  • Supporting healthy blood sugar levels already in the normal range
  • Promoting healthy insulin sensitivity
  • Promoting healthy gut microflora
  • Supporting healthy lipid metabolism
  • Stimulating the release of nitric oxide for healthy blood flow
Berberine Helps Ease Anxiety and Depression

Another benefit of AMPK is that it protects neurons and increases key neurotransmitters which improves brain function and psychological well-being.  So, it should not be surprising that several studies have shown that Berberine is very useful for anxiety and depression.

Berberine and Cancer Prevention

Berberine slows cancer growth and causes cancer cell death through a variety of mechanisms: tumor cell apoptosis and cell cycle arrest, inhibits blood vessel growth to tumors, inhibition of tumor cellular invasion and metastases (spread), etc.
One of the main anti-cancer targets that is inhibited by berberine is NF-kappa B. NF-kappa B is one of the most important proteins in our cells, acting as a key switch in the development and progression of inflammation and cancer.
·       Cancer (and precancerous cells) often have a permanently activated NF-kappa B, which keeps the cells proliferating and prevents them from dying (apoptosis.)
·       Chronic inflammation can also be a result of activated NF-kappa B, and we know that chronic inflammation can lead to cancer growth
·       Additionally, Berberine sensitizes cancer cells to the effects of radiation but NOT of normal cells. So Berberine may make radiation therapy more effective. 

Berberine also inhibits the tendency of cancer cells to become drug resistant over time by inhibiting the cellular membrane proteins that pump drugs out of the cell. When Berberine is taken with numerous chemotherapy drugs, studies have shown that they work synergistically to fight cancer.
Contraindications for Berberine

·       Displaces bilirubin and should not be administered to jaundiced neonates (may increase bilirubin levels due to displacement of bilirubin from albumin)
·       May cause a prolonged QT (a variable in cardiac electrical conduction) in patients with underlying heart disease
Drug Interactions

While Berberine is quite safe and well-tolerated, it may be contraindicated if you’re taking medications.  For example, Berberine may hinder absorption of tetracycline and other similar antibiotics, rendering them ineffective. Also, because Berberine significantly inhibits CYP3A enzymes — enzymes needed to metabolize most drugs — it can lower the clearance of medications, which in turn can augment their effect. This can lead to overdose, the risks of which will vary depending on the drug in question.

Berberine increases the effects of drugs that lower blood sugar so it is critical that you not mix Berberine with these drugs unless under the supervision of a physician.  IT is important to note that Berberine produces all the benefits of Metformin with much lower risks!

Sources of Berberine

Berberine is available as an isolated supplement OR through certain herbs such as goldenseal or Phellodendron.    Nexrutine is a patented Phellodendron Extract with high levels of Berberine that is particularly effective at reducing joint pain, improving mood, and reducing prostate inflammation and likely prostate cancer risk.   Phellodendron also has has a long history of being used to treat prostate inflammation and prostatitis.

INCREDIBLE HOME DESIGN WITH NATURAL LIGHT

This 94 square meter apartment has a privileged location on the corner of the building. Looking for an apartment in well appointed with three bedrooms, one next to the park, with open views to the outside and green space overlooking the street, while the kitchen opens onto the courtyard and peaceful atmosphere. In the middle is a spacious hall and in relation to this, a new bathroom. The general plan with large windows on three sides and bright colors fill the room with light. It is difficult to decide which of these rooms, we love the most.

INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

Battlefield Hardline: A Double XP Boost is Currently Active! [Notification]

Just a quick post to notify those interested in Hardline that a Double XP Boost is Currently On! GOGOGO http://battlelog.battlefield.com/bfh/

See You In The Game!

Paperless Mission #10: Distributing Student Assignments

This is the tenth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

 

Mission #10: Distribute Student Assignments through Shared Folders

Once my students had their iPads, I needed to figure out a way to get their work out to them. At first I tried using Edmodo, but that proved to be a bit glitchy for assignments where I wanted students to work with the materials in a different app like GoodReader. I needed to figure out an easy to manage workaround. Welcome back, Dropbox!
To do this, I created a new folder on Dropbox called “Student Assignments.” I then right-clicked on the folder to pull up the option to “share link.”
This pulls up a new window that shows the internal content of the folder in the background. Here, you could enter in a bunch of email addresses, but I prefer to click on “Get link.” This copies a link to your clipboard for you to paste somewhere else.
Once I had the link to the folder, I put it in a highly visible spot on my class website. My students use my class website constantly, so getting to the link was easy for them once they knew where to find it. 
Once the folder was shared, I started to create the internal contents of the folder. I created 6 folders inside — one for each day of the week and an archive folder. 
I numbered the days of the week to control the order of the files. Dropbox will alphabetize the folders otherwise.
As I gather resources or assignments that I want students to access, I save them as pdf files and I just put them in the folder to match the day that I expect them to do the assignment. At the end of the week, I move everything into the Archive folder, and I start over creating the assignments for next week. 
This system has worked incredibly well for me! Here’s why:
  • Items in Dropbox sync immediately, so if we’re in the middle of working on something and I realize that I’ve forgotten to give students something that would be helpful, I can just drag it into the folder. I don’t have to sprint down to the copier. 
  • It’s the ultimate organizer for absent students. If a kid misses class on Tuesday, they (and their parents) know to go to the Tuesday folder to see what assignments are there. There’s no more worrying about lost papers or assignments.
  • The archive folder provides a great back-up for lost work. If a parent can’t find a reading or a study guide to help before a test, there’s an easy place to go to see all of the work.
  • It only requires a one-time set-up. Since I’m sharing the external folder and not the individual folders or assignments, I can change out what’s inside the folder without having to get a new link to share. 
  • It doesn’t require any log-ins or sign-ups from my students. They don’t have email yet, and they don’t have Dropbox accounts of their own, but that doesn’t matter. Accessing shared files on Dropbox doesn’t require a log-in of any sort. 

I’ve been incredibly happy with this system. Everything that I would have copied in the past has been easily distributed through my shared folder in Dropbox. 

What are some other ways you could use shared folders in Dropbox? I’d love to hear your ideas in the comments.

Blog Hunting

Today I was hoping to link up with Laura Candler’s Corkboard Connections Blog Hunt, but it seems that linky closed already [sadface].  Still, I want to share a little about what I’m using as my Google Reader alternative and why.


In my mind, this is a battle between BlogLovin’ and Feedly.

BlogLovin’

I’ll confess that I didn’t move over to this platform initially. As soon as I caught wind a few months ago that Google Reader was dying, I quickly packed up and moved over to Feedly. With all of the recent push in the teacher-blogger community toward BlogLovin’, however, I decided to give it another try.
What I like
As a blogger, there are a few features that I really like about BlogLovin’. 
1. Notifications and Blog Finding
I like that I can get notifications when new people start following me. I also like that when I click on those notifications, I can see what other blogs people are reading. I’ve stumbled upon some great new-to-me blogs that way over the past few days. 
2. Viewing actual blogs
Rather than seeing a stripped down version of someone’s blog, I can see the actual website in a BlogLovin frame. This allows for easy commenting when I want to leave comments. It also lets me see how cute everyone’s blog is these days.
What I dislike
1. Too many clicks
It seems like it takes forever to navigate sometimes, and I’m constantly clicking to mark things read, jump between blogs, and if I actually leave a comment on a blog, I lose my place in BlogLovin and have to start over with the remaining unread blogs. I subscribe to hundreds of blogs, so I have to be efficient when I’m looking at content. 
2. It’s still buggy
I tried to go back and organize the blogs that I read into categories the other night, and I found that BlogLovin wasn’t saving my organizational changes for blogs unless I categorized them as soon as I started following them. That was annoying. I also noticed that some blogs that I’m certain I was already following were showing up as unfollowed. Others were showing up multiple times in my reading list. I suspect that a lot of these bugs will improve — I saw iPad updates for the app yesterday, so I know they’re working on it, but I wish a lot of these features were already working better.

Feedly

Since I’ve been using this for a few months already, I’ll openly confess that I’m a bit biased. It may also be the case that I’ve got this platform more figured out than BlogLovin, and some of the “advantages” of Feedly may exist in BlogLovin, too. But here’s what I’ve found…
What I like
1. Better app integration
There are several different apps that I like to use when I’m reading blogs (and in this case, I’m talking about web-based apps, not iPad apps).
Pinterest – Feedly has Pinterest integration built in, so I can hover over an image and pin it straight from Feedly. The pin will link back to the original blog.
Buffer – Buffer is an app that I use to schedule Tweets so that they’re spaced out throughout the day rather than sent all at once as I read blogs. If I read a blog post that I really like, I’ll send it to Buffer to share with others.
IFTTT – If This Then That is an app that sets up certain actions based on commands that I give. For example, if I star an article that I like in Feedly, it will automatically send it to my Evernote notebook with tags that I set. There’s a whole list of IFTTT recipes for Feedly here. 
Evernote – I can send items straight to my Evernote notebook from Feedly as one of the sharing options.

2. Easy navigation
There are lots of easy keyboard shortcuts to use to go through articles when I’m reading on my computer, and it’s very easy to organize articles in categories. Even when I’m behind in my blog reading, I can get through it pretty quickly without feeling like I’m missing important content.

3. Marking articles
I know I can “heart” articles on BlogLovin, but I can mark articles on Feedly for later with specific tags that make them easier for me to find. For me, that’s a better equivalent to starring articles on Google Reader, and I did that a lot.

What I dislike
1. Somethings get lost in translation
Sometimes the pictures don’t get pulled into Feedly correctly (which might not be Feedly’s fault), and I probably miss out on some cool content because of it.

2. Commenting is more complicated
I still have to click to go to the external link of the original blog post to comment or read comments. This is especially complicated when I’m using the iPhone or iPad apps. When I’m on a mobile device, I usually mark the article I want to comment on for later and check it out when I’m back to my computer.

And the winner is…Feedly, mostly

At least for now, I’m sticking with Feedly. I still like visiting BlogLovin’ to find new blogs to follow, but my new strategy is to follow on BlogLovin’, and then I add it to a list called “On My Feedly.” Then I add the blog to one of my reading lists on Feedly. Then when I go into BlogLovin’, I can immediately mark the “On My Feedly” list as read because I’ll know I’ve seen it all on Feedly. There are a bunch of new blogs that I started following as I was trying out BlogLovin’ that aren’t on my Feedly list yet, so that will be a process to move those over. It’s not a perfect system, but I expected some growing pains in the transition. 
I’m going to continue to use BlogLovin to discover new blogs because that’s a huge benefit in my mind.
Where did you land in the Google Reader alternative battle? I’d love to hear what you chose and why in the comments section! 

Workout Fuel Conclusion

Workout Fuel Conclusion

WORKOUT ANYTIME has been holding a month-long competition on our Facebook titled “Workout Fuel” where fans were asked to submit their favorite pre-workout and post-workout snacks. Each comment acted as a submission and each like on a fans comment acted as a “vote.” In our final week of “Workout Fuel” each weekly winner is going into a head-to-head competition. You the fans may vote on your favorite workout snack! You can vote here: http://bit.ly/WorkoutFuelFinal
Workout Fuel | WORKOUT ANYTIME

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN FOR TEENS

SMALL ROOM DESIGN FOR TEENS

There were many children inside, but somehow neglected to share ideas on the bed and adolescents. We will try to catch it from that position, where we’ll show you 10 ways to decorate the room of a teenager. Of course, these designs are aimed at age group 9-14 years and do not include all decorations eccentric but warm and relaxing colors. There are plenty of shelves for CDs, books and magazines, then we are also dealing with students of consciousness. I especially like the pictures on the wall of cartoons in black and white as they seem to bring personality into the room.

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN IDEAS FOR TEENS

SMALL ROOM DESIGN FOR KIDS

SMALL ROOM DESIGN FOR KIDS

SMALL ROOM DESIGN INSPIRATION FOR TEENS

SMALL ROOM DESIGN INSPIRATION FOR TEENS

SMALL ROOM INSPIRATION DESIGN FOR TEENS

SMALL ROOM INSPIRATION DESIGN FOR TEENS

Cut your Protein why no Sugar?

The case against sugar is a complex one. Besides the fact that refined sugar is a totally unnatural substance that has been stripped of its nutritional value—fiber, vitamins, and minerals—apart from the calories it provides, sugar in concentrated form is very hard on the pancreas. The pancreas, which is responsible for the production of insulin and therefore the regulation of blood sugar and energy levels in the body, has adapted through evolution to deal with a steady flow of glucose in small quantities such as those that result from the intake of complex carbohydrates.

One of the biggest beauty cons of all is the idea that if you eat lots of protein your muscles, skin, hair, and nails will grow strong and you will stay young. Like the old-fashioned high protein diet for building up athletic strength, it doesn’t work. The human need for protein has been grossly exaggerated. At the turn of the century, respected opinion held that we need between 120 and 169 grams of protein per day. Then Chittenden showed in human experiments that far better performance and health were possible on fifty grams, a much lower amount. Another scientist named Hindhede set the figure at thirty grams. Then Oomen in Amsterdam and Hipsley in Canberra discovered a population in Australia which develop not only full health, but exceptional muscular structure and performance on a diet of merely 15 to 20 grams of protein per day.

Diet Start

Later in the United States, the American Research Council’s Food and Nutrition Board agreed on a daily requirement of 70 grams for adults. One member of the board, named Sherman, described how this figure was arrived at. The evidence the committee examined indicated that a much lower amount was needed, somewhere around 35 grams, but there was agreement that if so low a figure had been set there would have been a public outcry, so a corresponding “margin of safety” was decided on and the 70-gram figure was published. But because the scientific basis for the figure was nonexistent, the word “recommendation” was chosen instead of “requirement.” Current recommendations for protein intake hover about the 50-gram mark, although there is strong evidence now that we probably need even less.

Your body needs amino acids, the constituents of protein, for its metabolic processes, for growth and the repair and maintenance of body tissue. Proteins are made up of twenty-two different amino acids; all but eight of them your body can manufacture itself. These eight, which have to be taken in through your foods, are referred to as “essential” amino acids.

A large portion of a protein molecule is made up of nitrogen, and one of the important things about taking protein is that it helps keep a good nitrogen balance in the body, so there is as much nitrogen coming into the body as there is leaving it. This balance helps maintain body health and muscle strength, so that you don’t go into what is known as a negative nitrogen balance, when you lose muscle tissue from your body. To keep your nitrogen right, 10 to 15 percent of your total calorie intake should be from protein.

But when a greater percentage than this of your calorie intake comes from protein foods, then your body goes into a negative mineral balance and you start gradually losing precious minerals and trace elements such as zinc, calcium, magnesium, iron, potassium, and chromium from your system. These nutrients, so easily lost from the body, are vital not only to physical health but also to emotional stability and well-being (more about minerals later). Wachmann and Bernstein of the Department of Nutrition at Harvard University investigated the high protein diet and came to the conclusion that the protein-rich (especially the meat-heavy) diet plays a strong role in the genesis of osteoporosis, a softening of the bones, particularly in women after menopause, caused by the loss of minerals. This is probably because of the high protein diet’s tendency to leach valuable minerals (in this case calcium) from the system. And purely from the point of view of physical beauty, many of these lost minerals, such as sulfur, selenium, zinc. magnesium, and calcium, can make the difference between prematurely aging skin caused by a rapid collagen and elastin breakdown, nails that split, or hair in poor condition, and radiant looks glowing with strength and health.

Finally, the breakdown and metabolism of proteins in the body lead to the formation of a number of complex by-products such as urea, nitrogen, and ammonia, which can be toxic. These wastes need to be eliminated. This isn’t always easy, and it puts great strain on the liver and kidneys. This is why, on the well-known high protein reducing diets, you are advised to drink large amounts of water in order to water down these poisons and help excrete them.

Workout Anytime in North Fulton Newspapers

Workout Anytime in North Fulton Newspapers in an article titled, “New Workout Anytime coming to Milton.” The article begins with information about the new Workout Anytime opening in Milton and the owners. The article then goes into details about what you can expect at aWorkout Anytime, with a quote from Randy Trotter. General Manager Chris Maier is quoted about why he believes in the Workout Anytime model and Lynn Jackson is quoted about why they’re happy to open in the area. The article closes out with info on how to join and about the expansion plans for Workout Anytime.  Click here for the entire article or begin below.

New Workout Anytime coming to Milton
By: Caitlin Wagenseil
MILTON, Ga. — When two members of a gym found out their beloved workout place was going to close down, they decided to take action. 

Paul and Lynn Jackson, previous members, bought the Workout Anytime in Cumming. Now, they are gearing up to open their second location in Milton with Randy and Heather Clevenger.


(Read More)

DECORATING IDEAS FOR GIRLS BEDROOM GOOD

True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM

DECORATING IDEAS FOR GIRLS BEDROOM

And More: In One Sentence™ – “The RX 470 or The RX 480”? [A Very Short Comparison with Sources, Currently Text-Only]

As done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry’…
For this post, I answer the quite-specific Hardware Upgrading question [mainly as it was one that I was asking myself, so I thought I would share my recent findings with others], ‘should you get the AMD Radeon RX 470 GPU or the RX 480’..?

The Short Version

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The Long Version

Again, as done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry'[just like how I spent tons of time on the very creative and original titling of these types of posts..].

Where was I? Oh yes, here then is my summation for a Hardware Purchase Suggestion, a very specific answer for a very specific question in Hardware Upgrading [arrived at after many hours of reading, researching, watching benchmarking videos, all while getting distracted by games, health issues and non-computery-or-techie events in life… but you can skip all of that Life Drama of your own and skip all of the time Researching on your own and just ‘get to the jist’ right here], in one sentence – the answer to the question:

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The answer above is based on an average viewpoint of all reviews read and videos watched. Of course, there is always fluctuation in the average amount (sometimes the fps was exactly the same, sometimes it was a quick change in difference [eg. in a video benchmark] by 20fps or slightly more for a short period of time). Also, for some people, money isn’t the issue and they want the higher-shelf RX 480 for the capability it offers. No problem, I’m just presenting what I have seen so far, between the 470 and the 480. If you can “easily” afford the faster product, go for that – but for those who are in the situation where $20 or $40 is a “big step” in price at the moment for them, but they really want to upgrade their aging hardware “now” at the same time – then this summation is for them.

As I always say, if you are looking to upgrade any hardware in your system – and if you have the time to do it:

Do your own research, read lots of reviews, check out prices in multiple places/sites/stores and find out which is the best path for you, at that point in time. No matter what the part is, spend as much as you “comfortably” can (to make it more ‘future proof’). What is the most important/best advice I can give, from 20+ years of technical expertise and real-world experience in the field presented without making a new paragraph so it would be easier to read..? It is this: No matter what computer part you are purchasing, if you are not in a place where “money isn’t an issue”, then watch for “The Jump” in price – that leap or huge gap in prices – and purchase a part that is just in front of that gap (before the large price increase); that is the “Price Sweet Spot”, where you are getting ‘the most bang for your buck’ and other cliche phrases. Most of all though – have fun learning and doing it all!

This Message Brought To You By Troy from The Game Tips And More Blog And Free Websites And Other Things That Made It All Happen

List of Some Sources Researched (not including video benchmark sources):

http://www.techspot.com/review/1220-amd-radeon-rx-470/page2.html
http://www.gamersnexus.net/hwreviews/2544-sapphire-rx-470-platinum-review-benchmark-vs-480-gtx-1060/page-4
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/73155-amd-radeon-rx-470-4gb-review-4.html
http://www.pcworld.com/article/3104044/components-graphics/amd-radeon-rx-470-review-a-great-graphics-card-with-a-terrible-price.html?page=3
http://wccftech.com/amd-radeon-rx-480-rx-470-3dmark-performance/
https://www.techpowerup.com/reviews/ASUS/RX_470_STRIX_OC/10.html
http://www.tomshardware.com/reviews/amd-radeon-rx-470,4703-4.html

Speedrun – Hitman: Blood Money – A Vintage Year (Silent Assassin, Pro Difficulty, Suit Only, Targets Only, “No Coins”)

Messing around trying another Speedrun, this time booting up some good’ol Hitman: Blood Money, “A Vintage Year” level.

Hitman is a wonderfully crafted, enjoyable game. In my opinion, every single installment in this series has been. People have enjoyed the ‘puzzle-play’ aspects of it, people have enjoyed the gunplay, the stealth. Players have also enjoyed trying to run as-fast-as-they-can through levels that were probably not designed with this intention. Now, Hitman: Blood Money may not win any awards for “realism” in some areas of gameplay, but I personally have something against the concept that an Assassin, wearing a nice suit, most likely a millionaire, is carrying around twenty dollars in pocket change. Heck, I am sometimes annoyed at the jingle in my own pocket of a couple of quarters when I come across them. Thus, my personal aim with this level: to do a Suit-Only, Targets-Only, Silent Assassin, ‘No Coins’ Speedrun (on Professional Difficulty). I am probably not the fastest at this sort of thing, I have only done a couple of intentional Speedruns in the past; but it was still fun to make and I figured it was ‘decently fast’, so I wanted to share. Enjoy!

Recorded game:  Hitman-Blood Money, First/Third Person Shooter/Stealth/Action
Recorded with:  Bandicam (Registered Version) @ 1080p
Recording codec:  MPEG-1 @ 80% Quality (Default Setting), 30fps

This was actually not as hard as I thought it would be – after finding out that Delgado.Sr is snipe-able up out on his balcony. It was his Son that gave me trouble (as it seems to do with everyone, after a few forum finds on the subject). I started just pushing him down the stairs and also setting up the Barrels to fall on him; but eventually I settled on just a good-old-fashioned-assassin-stand-by: the single bullet to the head. This felt ‘right’, after sniping dear-ol’Dad, anyway. Instead of pushing the Guards at the bottom into the water, I just walked non-chalantly by them, as they didn’t seem to care anyway.
[On the actual Playthrough, I seem to get some guards’ attention, but I assumed this was for going into the areas I wasn’t supposed to, not for being witnessed killing anyone]

I also wanted to do things like ‘leave nothing behind’, such as ‘just dropping weapons’ (like the Sniper Rifle) to save time. This sort of stems from the multitude-of-coins thing… Don’t get me wrong by the way, I appreciate the time so many have taken to figure out their own ways to complete Hitman levels by using distractions. I just for some reason [OCD?lol] find it hard to extend my fantasy thinking within the game ‘that far’ – to where a so-called Silent-Assassin-slash-Hitman is always carrying around and actually utilizes enough laundry money to make the homeless cry on every mission. [I didn’t actually mean to rant here, hah] I just think if an assassin wanted to throw anything around to distract guards, it could more realistically at least be a found weapon of some sort, as opposed to a ton of coinage everywhere (pebbles could even make more sense).

At any rate, whether you use coins (a mechanic that is indeed offered directly within the game) or you don’t, there you have it; not the fastest run [or the most ‘Silent’ lol], but hopefully an enjoyable little watch, nonetheless.

See you in the games!

Why Teachers Love Technology

An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

What do we Know Infographic
Graphic from OnlineUniversities.com

Do you love technology? I’d love to hear why in the comments section!

Gain weight especially fat: Here’s what make you do

1. Food reactions cause fluid to surround invading food particles. When food macromolecules are identified as foreign invaders, your body launches the inflammatory response, which includes flooding an area that’s under attack. Your body will hold onto this water as long as reactive food substances remain in your tissues. This water dilutes these substances and reduces their effects, but at the same time the cells and tissues swell with water. This often accounts for swelling under the eyes and chin, in the hands, feet, ankles, and midsection.

2. Food reactions release hormones that cause fluid retention. To offset the effects of the allergic inflammatory response, the body produces hormones, such as adrenaline. But these hormones cause water retention. The adrenal hormones cortisol and aldosterone increase sodium uptake, and sodium attracts water to cells and tissues.

This action also triggers other hormonal changes, apparently through effects of the pituitary gland, which orchestrates your body’s ‘hormonal symphony.’ These other hormonal changes may include excessive secretion of anti-diuretic hormone, which causes fluid retention. Anti-diuretic hormone is also often secreted in response to stress, and is commonly released by women as part of premenstrual syndrome. The female hormone estrogen, which can be affected by food reactions, also increases water retention. Furthermore, growth hormone, which helps boost the metabolism, can be depressed by food reactions.

Diet Start

Besides these hormones, which circulate throughout the body, food reactions also have strong effects on certain gut hormones (including cholecystokinin and somatostatin), which can cause water retention and swelling directly in the gut tissues. Sometimes, when people experience immediate abdominal swelling after eating, it is due to the influence of gut hormones.

Because women tend to have more problematic hormonal profiles than men, the hormonal elements of false fat tend to be worse for them. For example, when some menopausal women are given extra hormones, their bloating and swelling increase.

When people stop eating their false fat foods, however, these hormonal problems usually stabilize quickly.

3. Food reactions make intestinal membranes swell. There is often pronounced swelling of intestinal membranes, in response to irritation by allergens and in response to hormonal imbalances. This can account for the ‘pregnant’ look that often characterizes false fat. The result of this type of swelling is a feeling of heaviness and congestion in the abdomen, particularly in the small intestine.

4. Food reactions disrupt cell chemistry, causing fluid storage. Food reactions cause a condition called cellular acidosis, which harms cell chemistry and results in fluid retention. Here’s how it works. The inflammatory response, caused by food reactions, causes calcium and sodium to enter cells, and this attracts water. It not only causes swelling, but also depresses the function of the cells’ energy centres, or mitochondria. When the mitochondria are disturbed, it saps your energy.

This action also causes even more release of the stress hormones cortisol and aldosterone, which try to correct the chemical imbalance. But this in turn just causes more fluid retention.

Furthermore, as the food reactions subside, the cells release all of these acidic chemicals into the tissues. This can cause a new round of inflammation and the release of even more protective fluids. Over a long period of time, this tissue acidity can contribute to the onset of degenerative diseases, including arthritis.

5. Food reactions cause capillaries to leak fluids. As you may recall, many food reactions release chemicals, such as histamine, that make blood vessels expand and contract, in the process leaking fluids into tissues. This leakage of fluids causes further inflammatory reactions, with accompanying swelling. Sometimes this swelling can impinge upon nerves and cause aches and pains. It can also cause hives, due to the swelling of capillaries near the surface of the skin.

Often, when this fluid leaks out of capillaries, it carries protein with it. This protein in turn attracts sodium, which causes even more fluid retention. The combination of sodium and fluid outside the cells can ‘smother’ cells by making it harder for oxygen to reach them. This contributes to further cell malfunction, and even to the death of cells.

When cells die, even more water is drawn to the area to flush away the dead cells.

6. Food reactions cause gas production. Food reactions allow the proliferation of abnormal bacteria and yeasts, and these factors lead to fermentation of food. Fermentation, primarily of carbohydrates, forms wind or gas, including methane.

Secondarily, it creates by-products of alcohol metabolism, such as the chemical acetaldehyde, and alcohol itself. Both of these substances can impair mood and cognitive function when absorbed by the body.

Food reactions also tend to slow the natural squeezing of food through the digestive tract by the bowel-muscle process of peristalsis. When food transit through the bowel is slowed, more gas and fermentation products are produced. Also, this `constipation effect’ causes more irritation of the bowel lining. This can create even more gas and can also contribute further to leaky gut syndrome, allowing reactive macromolecules to slip through the intestinal wall.

Bacterial overgrowth in the small intestine also causes fermentation and gas. This causes pressure and discomfort in the small intestine, because the small intestine is relatively narrow and doesn’t have much room for expansion. Another major contributor to gas buildup in the small intestine is lack of the digestive substance hydrochloric acid, which is abnormally low in approximately 70 per cent of all people over 60. Hydrochloric acid, or stomach acid, also tends to be chronically low in people who are under stress, in people who eat lots of processed foods, and in people with food reactions.

Gas formation is also increased by use of anti-inflammatory drugs, such as aspirin, which irritate gut mucosa. It can also be exacerbated by antacids.

In addition, poor digestion also causes increased excretion of the amino acid taurine, which lowers cellular magnesium and slows peristalsis, resulting in more intestinal gas.

Lastly, women’s menstrual cycles upset hormonal balances, and this also impairs peristalsis.

All of these factors are insidious. They feed off one another and contribute to bloating and swelling. The result of this entire range of forces is a swollen, distended belly and puffy, spongy flesh all over your body. Until now, you may have thought that this was fat. Now you know it’s not. It’s false fat — and you can get rid of it in a week or less if you make the necessary effort.

I’m sure you can do it! Every day that you make the effort, you’re going to feel a little better. You’ll look better, too.

The Ten Steps of Body Clock Diet

The ten steps of the Body Clock Prescription that follow don’t take much time or many resources but they go a long way toward helping you stay healthy if you are well or feel better if you are ill.

  1. Follow the Body Clock Diet. Put protein in your morning meal, snacks and lunch, either by drinking the Rhythmic Shake or by emphasizing high protein foods. Move most of your carbohydrates from breakfast, lunch and morning snacks to the evening.
  2. If you scored high on the insulin resistance test, adhere as rigorously as you can to the Body Clock Diet. Because insulin resistance is at the root of so many conditions, you want to capitalize on your ability to bring down your serum insulin level. Eat the maximum tolerable amount of your protein during the day and save as many of your carbohydrates as possible for one meal in the evening. Craving carbohydrates is your enemy in this regard; you will probably need to make a gradual transition to the level of strictness that I’m recommending. That way, your insulin levels will come down step by step; they will not be screaming for carbohydrates while I’m screaming at you not to eat them.
  3. Excess alcohol and caffeine interfere with circadian rhythm. The definition of excess depends on the person and on the time of day. In the early evening, the effects of alcohol are minimized by most people’s capacity to easily metabolize two to four ounces of liquor over a two- to four-hour period. But efficient alcohol metabolism declines dramatically after 10:00 p.m., making late night drinking particularly disruptive. Avoid caffeine except at around 4:00 p.m., the one time of day when its circadian effects are neutral.
  4. Stay away from diet drinks because they send a false signal to your body. They promise the potential arrival of sugar and then, after engaging your body’s mechanism for raising insulin, let you down when the sugar doesn’t arrive.
  5. Get plenty of full spectrum sunlight in your eyes and on some part of your skin every day. When you expose your eyes to sunlight — and I hope it’s obvious that I don’t mean staring at the sun — do it without wearing spectacles. These days spectacles of all kinds block both the healthy and the injurious types of ultraviolet rays. So get out in the sun, take off your glasses and soak up a moderate amount of sunlight — at least one-half hour near dawn or dusk — every day. This does not require sunbathing, simply being out in the sun. If you live in a northern latitude where the winter days are short and there are lots of rainy, snowy or cloudy days, then consider getting a light box like those prescribed for people with seasonal affective disorder. Expose yourself to the light box for at least a couple of hours every day.
  6. Establish a regular time for going to bed at night and getting up in the morning and get sufficient sleep every night, preferably during the natural period of darkness between sundown and sunrise. While you’re asleep, expose yourself to light as little as possible. If you wake up in the middle of the night to pee, don’t turn on the light. Instead, use a dim flashlight or nightlight to light your way to the bathroom. Even a tiny amount of light at night will squash your melatonin peak. Remember that melatonin is an antioxidant and informational substance whose narrowly timed peak in the middle of the night, following a healthy exposure to light during the day, may be suppressed by ill-timed light. Failure to have a peak release of melatonin at night is like missing a bus that comes only once a day.
  7. Encourage rhythmic harmony by learning to breathe with your diaphragm. When you relinquish control to your diaphragm, your breathing will take on the normal rhythm directed by the unconscious part of your brain rather than the potentially asynchronous rhythm generated by your chest muscles. This works especially well when you engage in stressful activities that make you unconsciously hold your breath. For example, when I am on top of a ladder trying to hammer in a nail that is slightly out of reach and I dislodge the nail, bang my thumb or bend the nail, I stop and say to myself, ‘Baker, stop holding your breath and take a deep one with your diaphragm.’ Then the nail goes right in. The same is true for threading a needle, looking for lost keys, worrying about finding a restroom when you’re downtown with a filling bladder, waiting in line at the bank or driving on the freeway.
  8. Engage in some form of rhythmic exercise at the same time every day, preferably in the afternoon when muscle strength is at its peak and most people perform best. If you can walk, walk. If you can swim, do that, especially if you can find nonchlorinated water to swim in and are strong enough to swim with a good steady rhythm. If you prefer, ride a bike. But whatever you do, remember to breathe in a relaxed way, using your diaphragm, so that the effort of your exercise reinforces rhythmic harmony in your body instead of allowing unnatural chest breathing to interfere with it.
  9. Working out to music takes exercise one step farther by permitting you to synchronize your activity with the beat of the music. Of course, the ultimate refinement of exercising to music is dance. If you are ill and unable to move about, then simply listen to music, but really listen so that the music penetrates your being rather than simply acting as a background to whatever you are doing. Some types of music are more healing than others. I asked Millie Grenough, a music therapist and author of Sing It! Learn English Through Song, what would be the best choice of music for a person with inflammatory illness.3 She said, ‘It can be anything from Mozart and Vivaldi to favorite Broadway tunes, from long-remembered lullabies or Tibetan chants to your favorite song when you were sixteen. The main thing is that it be music the person loves.’
  10. Meditate daily to reinforce and integrate your body’s rhythms. And if you’re ill, use meditation as the platform from which you launch the powerful tool of visualization. When you dance, you put your whole body’s movement into the embrace of something bigger than yourself — the music. When you are fully the captive of the music, you are free to receive its blessing. And every step of the dance is a choice you make to stay with the music.

It’s Not Just You™: AMD’s Crimson Drivers, Radeon ReLive Not Working At First [Possible Fix]

Just a quick post before I go to bed here, that I wanted to share about the AMD Crimson Drivers that I got notified about just a bit ago, which included AMD’s “ReLive”, their new Game [and Desktop] Recording utility – ‘built-in’ to their 16.12 Drivers… For those who couldn’t get it working right away (I see posts about it already in the Official AMD Forums), I couldn’t either… And although I eventually did, I wanted to let others know, if you are having issues with it: It’s Not Just You™

I was already starting to get tired when I saw a notification of the Driver Update – and I had no idea there was a nifty Game Recording ‘app’ incoming with it [I haven’t been reading much lately, I have another Cold for pete’s sake!]. For AMD GPU owners, waiting patiently to see if AMD was going to come out with their own Game Recording utility – it’s here! The future is now!

Check out AMD’s Video on their ReLive edition of Radeon here: 
https://www.youtube.com/watch?v=nRSm12lwRe4

[I really wanted to start Testing it all out tonight, running Benchmarks and collecting Data for a TestRun or a Quality Test with it; but my sleepyness is actually building and getting the better of me, so I better go soon – I wanted to share what I did this evening though, to get it working (for me), before I go…]


Without going over the few things I tried first that didn’t work (setting configuration, testing with different games, etc), here’s the steps to take that finally got it running, for me:

  • Download the Latest AMD Drivers via their main Website (http://support.amd.com/)
  • Uninstall the main AMD Drivers via the Control Panel > Programs > Uninstall/Change Program
  • Reboot
  • Install AMD Drivers via the Download from their Website
  • Reboot

That’s it!

After that, even though I have a 200 Series* AMD GPU at the time of this writing**, I was able to get ReLive up and running, even playing a little bit with the configuration and making a couple of short test recordings, before I came here to write this quick ‘tip’ of what might help get it going for others… It’s a larger ‘step’ (messing with Drivers, as opposed to just messing with Configuration/Settings); but I always like to Troubleshoot from the smallest steps first (eg. changing some settings) to larger steps (eg. re-installing software) to huge steps (eg. OS reinstallation, hardware changes). Thankfully, it started working just fine after only a bit of a ‘larger step’ taken.


Although with the most recent versions of Windows you don’t always have to Reboot it when making changes, it helps to get everything ‘in order’ in the background, re-initializing all hardware and Drivers fully – which is why many installers/software still get you to do it through their installation programs.

I plan on putting the Game Recorder through it’s paces, working on a TestRun and a QualityTest, to come in the future here at The Blog – for now though, hopefully ReLive can get up and working for you, too – good luck, and if you are having troubles with it, remember – It’s Not Just You™!

* The AMD page on ReLive at their main website (http://www.amd.com/en-us/innovations/software-technologies/radeon-software/gaming/radeon-relive) shows only 400 Series GPUs as ‘Officially Compatible’. Although it does not state ‘it will not work with earlier Series’, it is unknown 100% at this time if it is possible, hence my mentioning it above

** Disclaimer and Personal Veracity Statement: Although I currently own an AMD GPU, I have owned NVIDIA GPUs in the past and will do so in the future. I have no personal preference between the two, purchasing one or the other as Upgrades depending on my needs at the time and my financial limitations at the time I choose to Upgrade. I have not and will not receive any compensation for mentioning or talking about either companies’ products. I am merely an enthusiastic user (of both).

Reminder: Diablo II – 2014 Ladder Reset is May 27th

That’s right, this is just a quick reminder that tomorrow is the Diablo 2 Ladder Reset for 2014!
So get ready – stock up on energy drink and tell your friends you won’t see them much for the next while – and get on that Ladder! Have fun playing, my wonderful readers – and enjoy being on the Top Of The Heap
(at least until the botters get going)
See You In The Games!

LUXURY GIRLS BEDROOM DESIGN DECOR STYLE GOOD

The design of a room can be a major problem in the redesign of your home. The problem could grow if you have to do for a child – a girl in particular. But do not worry, because we had some bedroom design ideas for the creative minds of the people working with the Italian girls.

LUXURY GIRLS BEDROOM DESIGN DECOR

LUXURY GIRLS BEDROOM DESIGN DECOR

They work in an atmosphere of classic charm in a contemporary way through a range of unique colors. Most models adopt a classic style, with good curves and cushions, and a pile of wood painted to create the perfect atmosphere for your little princess.

LUXURY GIRLS BEDROOM METAL DESIGN DECOR

LUXURY GIRLS BEDROOM METAL DESIGN DECOR

LUXURY GIRLS BEDROOM DESIGN IDEAS

LUXURY GIRLS BEDROOM DESIGN IDEAS

LUXURY GIRLS BEDROOM DESIGN CONCEPT

LUXURY GIRLS BEDROOM DESIGN CONCEPT

It’s Not Just You™ – The Elder Scrolls: Legends A.I. Seems Pretty Hard To Beat Now [Noticed]

Just a little notification that, if you are playing TES:Legends recently and find it’s quite a bit harder to beat the computer opponent (AI/NPC)… It’s Not Just You™

I was in the Beta for The Elder Scrolls: Legends; but never got around to finishing my “First Impressions” article on it [as is how it usually goes for me and posting, heh]. Legends has been out of Beta for a few months now, and if I could summarize the game in one paragraph, I would say that Legends is a Virtual Collectible Card style game, that is ‘both Single-Player and Multiplayer’ (you can play against other human opponents, in matches and “Arena” rounds – but you don’t have to, you can entirely play against the computer AI both in single matches and in ‘Arena playoffs’, if you desire). It is actually more of a “Card Collecting” game than a “Trading Card” game – as I have not seen a way to trade with human players yet – but that is similar to other ‘virtual card games’ of this genre, like Hearthstone and Gwent (“World Of Warcraft” Lore and “Witcher” Lore -based virtual card games, respectively). The game cannot be played Offline and you don’t actually get any ‘Real Life’ Cards of any form; but that again, is the same for the other virtual card games mentioned.

After playing a little bit when it was first Released, I didn’t play Legends for a few months, only recently picking it up again to play a bit – and boy was I in for a surprise!

The computer AI as it is now, offensive and ticked off
(Cropped Screenshot of art by Bethesda Game Studios)

Perusing the Updates for the game (which there seems to be one of every few weeks, a nice thing to see for a game!) – there was an Expansion for the game released at the end of June 2017 (Heroes of Skyrim) – but nothing that says, “We felt the AI was a little too easy to beat, so we beefed it up a bunch and it also will pull cards out of it’s butt hat, getting exactly what it needs at times, to win!” – so I’m not sure when this AI change occurred… [I didn’t play for a good few months or more, so sometime around mid-2017, I reckon].

Judging by the recent changes to the Computer Opponent A.I., get used to seeing this screen more often…

Legends is a fun game still, with it’s flashy effects and nice sounds, not to mention the wonderful Elder Scrolls-style ‘realistic’ art on everything; I personally don’t mind if I am going to be losing to the Computer a lot more; but it would have been nice to see a more obvious notification of it somewhere – or a way to perhaps adjust it (via a Slider or Dial or anything..).

I do think the AI was ‘just a little too easy’ at first, making simple moves and not many combos, losing a lot more than it won against me – but now it seems pretty darn hard – almost too hard, pulling multi-combos everywhere and buffing cards a lot more and getting ‘the perfect card’ or ‘just what it needs’ at times, to pull off a win (as though, instead of the AI having a prepared set of cards, cards seem now ‘generated as the game goes’, to “keep it competitive”). I can still win once in a while against the AI in Solo Play and Solo Arenas – and I understand that Bethesda might want to make things ‘a bit difficult’ to encourage selling Card Packs; but… Dearest Beth: It’s “Just A Little Too Much” Now… [in my opinion]

The ‘new’ Computer Opponent A.I. at work, busy buffing its’ cards to no end

I won’t stop playing, of course – and I won’t stop getting Card Packs once in a while (for all three of the Collectible Card Games mentioned above, when I can) – but I just wanted to mention this, for others too; that if you noticed the Computer seemed ‘tweaked’ lately and is now pretty darn hard to beat as an Opponent in Legends – It’s Not Just You™…

If I play some Versus matches, which I do from time to time – See You In The Game!

Addendum
Changes Seen:
– Increased Combination plays (Buffs, Debuffs, then Attacking)
– Increased Healing cards (Health added to Opponent)
– Highly Increased ‘instant-kill’ or ‘unsummon’ type “Destroy A Creature” cards (Piercing Javelin, Lighting Strike, Execute, Cast Out, etc)
etc.

Trip to Hyderabad cont…….

Wow what an assignment! I must say that I have experienced similar assignments in the past in other sectors. However for this sector (development sector) it was a first. As a consultant you have to be on guard all the time when doing an Organization Capacity Assessment (Very similar to a “Due Diligence” in the private sector); if the client wants to mislead you, it can be done quite easily. In my case I was confronted with just that.

Things that should look out for are:

  1. Uniformity in questioners
  2. Having sets of files pre prepared for you (always ask for random files)
  3. When interviewing staff they have uniform answers or say very similar things (always ask to speak to random sample of staff and triangulate your findings; include speaking to other stakeholders as they will be a be useful source of information)
  4. Taking a long time to locate files and other documents when you request for them
  5. Key staff suddenly taking ill and not being available for interviews
  6. Acting “stupid” or not seem to understand what you are requesting for or saying

These things must be handled very diplomatically otherwise you will not be able to complete the assignment. Do not have a “knee jerk” reaction, observe very well and collect enough specific examples so that you have a basis for doubting what is presented to you. At the same time you must see if this deception is systematic or simply put up for this occasion.

If it is systemic you now have a real problem; you will not be able to decipher what is “genuine” and what is “false.” My recommendation is at this point you should seek clarifications from the person who hired you as well as speaking to the decision makers of your client. A temporary halt to the assessment will be in order to do this discretely. Suggest you take prudent steps based on your clients feedback.

However if you feel it is a put up for this particular assessment then your task is easier and it should be handled with the management of the organization that you are assessing. (Don’t forget you still need to advice your client regarding this unexpected turn of events) As this would be difficult situation for some consultants to handle; I suggest a cautious but a very direct approach. This will reduce the space for excuses by the staff. Since it will come as a surprise to them the staff of the organization you are assessing will also not be able to gang up on you to defend themselves. Make sure that you do not engage in a long dragged out discussion, be short and to the point. If handled properly it should bring about normalcy to the process.

If however you do not feel comfortable to take a direct approach you must then document both versions of the process i.e.

  1. The results that are shown by the staff of the organization
  2. Your observations and reservation of those results

This however will not be very useful in the end; as it will not provide the right results to take decisions the assessment was supposed to deliver in the first place. In some rare cases you may need to repeat the assessment to get the right results.

In my case it was the latter and I did confront the staff and the management regarding it. There was an attempt to defend the position but it was not successful; things returned to an acceptable level of normalcy and I was able to complete the assignment.

reACT Trainer Total Body Circuit Workout

One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

Horizontal Press (chest press of some type)

Horizontal Pull (Row of some type)

Overhead Press

Vertical Pull – (some type of vertical pulling movement)

Here is a sample reACT Trainer Total Body Circuit:

Deals and Sales: Saints Row 2 and Syberia II, TotallyFree™ [Notification]

Update: As of Sunday, April 23rd, Saints Row 2 is no longer available for Free, but Syberia II still is

I haven’t been feeling too great lately (hence my not posting for a while) – but I wanted to make sure and come and get a quick notification out, for those that don’t know and are interested – that I saw two games being given away TotallyFree™ right now:

Saints Row 2, the open-world, GTA-style Action game is at GoodOldGames (now just GOG, they also offer newer titles these days), found at GOG.com

and

Syberia II, the third-person, mouse-driven Adventure game is being given away at Origin’s “On the House”, found at Origin.com

Both are completely free, so go get them now! GOGOGO

[Note: I do not get any compensation in any form for mentioning these games or companies here (there are no ‘referrals’ or ‘trackbacks’ in the links above); I am just a gamer who likes to share things I figure out and find on my own here, with you, other gamers… Have fun!]

Battlefield Play4Free – PlayTesting The XM8AR LMG (3 Full Rounds – Myanmar, Dalian) Raw Gameplay [Unedited] Gameplay Video

Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens (now called Play4Free Funds) that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a random draw of eight and it will generate an item for you.

The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

I recently won the XM8AR in The Daily Draw (for one day of use) on my Medic and thought I’d try it out and see how it felt and quickly write a post about it [I’ll call these PlayTests]. I am not a gun expert or know a lot about the statistics of the guns, but I will discuss briefly here how the gun actually feels and plays, especially compared to the Medic default, the MG3 Light Machine Gun. I played a few rounds with XM8AR LMG and recorded the first three full rounds. Here they are, shared unedited for you [a ‘Raw Gameplay’ video]:

Recorded with: Bandicam @1080p (HD) using the x264/H264/AVC Codec
Recorded game: Battlefield Play4Free (MMOFPS, a F2P game/Microtransactions)
Recorded levels/maps: Myanmar (Jungle, Assault), Dalian Plant (Rural Industrial Port, Defense then Attack)

[YouTube did something with the Aspect Ratio of this video and I had to use a command in the Tags section to fix it. Let me know if anyone has problems viewing this video properly]

Normally locked until Level 15, the XM8 felt great to use on my Level 10 Medic. It’s ammo box is a little smaller at 60 rounds (vs. the default Medic’s MG3 having 80 rounds), but it never felt ‘cramped for shots’ and didn’t feel like it took too long to reload.

The XM8AR Light Machine Gun is normally locked and cannot be used until your Soldier is Level 15, unless it is bought outright or won in The Daily Draw. Click to see Full Size

The nicest thing about the XM8 was the accuracy. You could really tell you were going from the “Low” rating of the Medic Default MG3 to the “High” rating of the XM8AR.

Comparison of basic stats between the default Medic gun, the MG3, and the XM8AR

Looking down the sights, the three-prong irons of the front sight are quite thin and easy to line up in the view of the rear sight, which is in the form of a circle. There is only a little bit of a pull up and slightly to the right, but the recoil is very small and easy to compensate for once you get used to it. I even felt comfortable shooting from the hip and at a distance because this gun felt so darn accurate compared to the starting weapon for a Medic.

The thin front prongs of the iron sight feel easy to line up for targets farther away and the XM8AR feels like it is very accurate, as can be seen by this Headshot from across a courtyard in Myanmar. Click to see Full Size

An all around great gun, it was fun as hell to use for a day. For only 300 Credits you can try out for a day of play, too. If you have 1250 spare Play4Free Funds you can purchase it permanently. It is a nice accurate gun to run with and may be worth it. Try it out for yourself sometime.

Have fun and See You In The Game!

Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

Franchisee Profile: Bill and Bob Aicklen

Franchisee Profile: Bill and Bob Aicklen

Bill Aicklen and his brother Bob, who is currently based in Texas, will be opening their fifth Workout Anytime gym in May. The brothers opened their first gym in Decatur in November 2009; bought the company’s flagship store in Dunwoody in 2012; purchased the brand’s first franchise location in Douglasville in 2013, and built their fourth store in Rome in June 2013. 

Bill, 63, received a Bachelor of Arts in philosophy from Old Dominion University in Virginia, and landed his first job in the banking industry working in the operations and financial systems department. From there, Bill moved on to spend the next 30 years of his career in the computer software business, performing various roles including post-sales, training and support. 

In 2006, Bill decided that he wanted to get out of corporate America and Bob, who was interested in investing in businesses, invited Bill to manage the operations. 

The first business that the brothers partnered in was an express oil change franchise. They built and operated two stores in Woodstock before selling in 2012 to focus their time and effort on Workout Anytime. 
How did you learn about Workout Anytime? 
We were looking for other business opportunities, and Bob came across Workout Anytime on the Internet. A business broker also presented the concept to us. 
Why did you choose an opportunity with Workout Anytime? 
From a franchise standpoint, it’s an easy business to get into; it’s simple. There’s not a lot of moving parts and you can staff the gym with just one or two people. Also, we both have strong customer service backgrounds and understand the importance of hiring the right people and providing excellent service. 
How has business been since joining the brand? 
We have between 1000-1700 active members at each location. Since we took over the Douglasville store and invested money into upgrading the equipment, we have turned it around. Our club in Rome is based in a small city with very little competition in terms of big name brands, and we have been very successful there. I expect Suwannee to also do well because it’s in a highly concentrated residential area. 
Are you involved in any charities or community outreach?
We localize our charity work depending on the club, and we usually donate free memberships for silent 
auctions. We also partner with Red Cross by allowing them to park their blood drive buses in our parking lots every quarter – the next drive will be in Douglasville at 3pm on May 12. We have also previously put buckets in our gyms for people to donate pet supplies for the Humane Society.

speed camera major malfunction? Or lazy police not reviewing photos? New Orleans police failed to review tickets generated by the automated cameras, and one guy has 10 tickets over 7 years for his parked truck

Actually, make that 11. After the first story ran last week, Schultz received another ticket on Saturday night. A security camera shows this one was actually triggered by a New Orleans Police Department vehicle speeding down the road, but as usual, Schultz was the unlucky recipient of the fine.

http://www.thedrive.com/news/20011/new-orleans-speed-camera-keeps-issuing-speeding-tickets-to-parked-cars

End result? More proof cops don’t give a shit about their jobs, and neither does the mayor or city of New Orleans. 2 cops certified that the two tickets initiated by speeding police vehicles (as seen in the video) went to Shultz. That’s just bull shit. Cops are speeding in a residential neighborhood, and other cops that are supposed to look at the damn photos, are not, they are rubber stamping them all. 

BEAUTIFUL HOME FAMILY DESIGN “VILLA DE CHARME”

Katrine Martensen-Larsen comes this stunning house designed for a family of seven children. We hope that this message will come in handy for those of you looking for new ideas for the nursery too. “Villa de Charme” is located in, Frederiksber Denmark and has been specially designed for a family of seven children. The designer said that this house is “evidence that many children and a hectic lifestyle does not mean you have to compromise on style.” The interior features original decorating ideas and news. The wallpapers are particularly interesting. White is used mainly to define the house and gives it an intimate feeling clean and fresh. bits of color are added here and there, crying the whole design. We really appreciate how serious, sober rooms alternate with play.

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

It’s Not Just You ™ – Heroes Of The Storm ‘Screen Shake’ = ‘Motion Sickness’ (Dizzy, Nausea, Headache) [Notification]

Just a quick post to let others know that – if you are experiencing this phenomenon – getting dizzy or even nauseous while playing Heroes Of The Storm lately: It’s Not Just You™… I even whipped up an Example of the effect, for those that aren’t quite noticing it:

Example of ‘the screen shake effect’ I made, in GIF format
(Click to see slightly larger Full Size)

I first came across this in the Official Heroes Of The Storm Forums at Battle.Net. It was originally posted by “Phoenix” a couple of weeks ago, here. Although I have seen it personally in-game (noticed it), I have not suffered the nauseating effects that many may/do suffer with this Special Effect the game offers – even though I have experienced ‘game motion sickness’ from other games. [I did notice when testing and creating the above Example, that it made me slightly queasy however..]. Mainly, I have ‘been lucky’ with not experiencing it because I do not normally play the Heroes that have/produce this effect (the ‘screen shake’ effect). Here is a list of all the Heroes and Spells that can produce this effect, thanks to a helpful post by “Hatsoz” on the Official Forums:


Spells with Screen Shake
Zagara – Nydus Network (R)
Genji – Swift Strike (E)
Sgt. Hammer – Concussive Blast (W), Blunt Force Gun (R), Napalm Strike (R)
Gazlowe – Deth Lazor (W)
Lucio – Soundwave (Q), Sound Barrier (R)
Valeera – Blade Flurry (W)
Zul’jin – Twin Cleave (W), Guillotine (R)
Ragnaros – Sulfuras Smash (R)
Alarak – Lightning Surge (E)
Cho – Upheaval (R)
Karazhim – Radiant Dash (Q) (Only with Volley of Blows Talent Lv. 16), Seven-Sided Strike (R)
Anub’arak – Burrow Charge (E) (Upon resurface)
Li Li – Water Dragon (R)
Diablo – Shadow Charge (Q), Fire Stomp (W), Overpower (E)
E.T.C. – Face Melt (W), Stage Dive (R) (Landing only)
Falstad – Hinterland Blast (R)
Kerrigan – Impaling Blades (W)
Muradin – Thunder Clap (W), Dwarf Toss (E), Haymaker (R)
Sonya – Ancient Spear (Q) (On Hit), Leap (R)
Stitches – Slam (W)
Tyrael – El’druin’s Might (Q) (On sword landing), Angelic Flash (Q) (Teleport to sword), Judgment (R)
Uther – Hammer of Justic (E), Divine Storm (R)





Heroes with No Screen Shake
Valla
Tyrande
Lunara
Kael’thas
Zeratul
Cassia
Probius
Varian
Samuro
Zarya
Auriel
Gul’dan
Medivh
Chromie
Tracer
Dehaka
Xul
Li-Ming
Greymane
Gall
Artanis
Lt. Morales
Rexxar
Leoric
The Butcher
Johanna
Sylvanas
The Lost Vikings
Thrall
Jaina
Azmodan
Chen
Rehgar
Murky
Brightwing
Tychus
Abathur
Arthas
Illidan
Malfurion
Nazeebo
Nova
Raynor
Tassadar

I experimented with every single Graphic Setting available in the game (eventually running it on the Lowest Possible Settings) and could not find a Setting that disabled this effect…. I first tried Physics, then other effects-affecting settings, such as Shader level, and more, until everything was at the lowest possible Settings and still the effect appears in-game.

I even looked through the game directories (folders) for some sort of editable configuration file, but the only ones present were ‘protected’ by Blizzard, by being compressed or encrypted in their own proprietary encapsulation of some sort (which renders the files not easily readable or editable by normal means – this is understandable, as they do not want their game easily ‘hacked’ or negatively affected by end users).

So, for now – unfortunately – there is no solution for this, for sufferers of this effect. The only recourse, until Blizzard puts in an option to Disable Screen Shake, is to avoid the Heroes that produce this visual effect.



Just letting Sufferers know: It’s Not Just You™!
[I will try to remember to return to this Post and Update it once Blizzard adds this option – or a workaround is found]

Workout Anytime in Global Atlanta

Workout Anytime in Global Atlanta

WORKOUT ANYTIME was recently featured in Global Atlanta. The article highlights Atlanta based fitness center chain, Workout Anytime adding its first location in Canada this fall. It mentions the new location in Calgary, Alberta scheduled for an October opening. Randy Trotter was quoted about the success Workout Anytime is planning to bring Canada. It also mentions Dustin Taylor and Jeff Gellatelly are the mast franchisees for the new location and grants them rights to open Workout Anyime centers in the provinces of Alberta and Saskatchewan.

You can view the full article here. 

KITCHEN FURNITURE DESIGN GENAH MAK NYOOOZZZ

The first thing to remember is that the kitchen is a very functional piece, but do not want to look that way. You can purchase kitchen furniture that is warm, welcoming and friendly to both practical and effective. For example, you can choose from a variety of carts microwave carts or beautiful kitchen that fits well with the decor of your kitchen. They also give him the space to display items or the space room that can hold pots and other utensils. A kitchen island is another element that gives additional working space, but with the addition of a few bar stools that can transform a functional kitchen in a comfortable and welcoming.

Kitchen Furniture Design

Kitchen Furniture Design

Kitchen Furniture Design

Kitchen Furniture Design

WORKOUT ANYTIME Featured in Black Enterprise

WORKOUT ANYTIME Featured in Black Enterprise

Zelly Wesson of WORKOUT ANYTIME was recently featured in Black Enterprise. The article discusses Zelly’s opening of his second WORKOUT ANYTIME location. Wesson has been playing professional basketball overseas for the past 15 years, and during his off seasons Wesson has been back managing his WORKOUT ANYTIME locations. Wesson discusses his role in his locations and how he has been successful. 
You can view the full article here. 

The Sims 2 “Ultimate Collection” (Absolutely Everything) – Completely Free from EA

When I first read about this from EA, that is, the possibility of getting absolutely every single expansion and “Stuff” add-ons completely free, I thought there must be some mistake… A little bit of reading at the EA website and I inferred from the phrasing that it was initially going to be offered as a free upgrade to current owners of The Sims 2 (Digital/Download or Disc-based versions); but I did a little more reading about it today and it seems that EA may be ‘planning on putting it “in everyone’s game list” eventually’… [in my opinion] most likely to arouse just-a-little-more interest in The Sims franchise for the upcoming “The Sims 4” release (now available for pre-order, slated to be released in September 2014).

Therefore, now feeling fully-okay-mostly safe from the dark shadows of ‘releasing something that wasn’t meant to be distributed’, I share with you the Product Code that will allow you to be the proud owner of “The Sims 2 Ultimate Collection”, which includes all of the below:

  • The Sims 2
  • The Sims 2: University Expansion
  • The Sims 2: Nightlife Expansion
  • The Sims 2: Open for Business Expansion
  • The Sims 2: Pets Expansion
  • The Sims 2: Seasons Expansion
  • The Sims 2: Bon Voyage Expansion
  • The Sims 2: FreeTime Expansion
  • The Sims 2: Apartment Life Expansion
  • The Sims 2: Family Fun Stuff
  • The Sims 2: Glamour Life Stuff
  • The Sims 2: Happy Holiday Stuff
  • The Sims 2: Celebration! Stuff
  • The Sims 2: H&M Fashion Stuff
  • The Sims 2: Teen Style Stuff
  • The Sims 2: Kitchen & Bath Interior Design Stuff
  • The Sims 2: IKEA Home Stuff
  • The Sims 2: Mansion & Garden Stuff

Wow, thanks EA!

Note: this package release may be time-limited and EA has stated that they will no longer be updating The Sims 2 or it’s expansions, although they can still be contacted if you are having technical problems running the game

Here are the steps to redeem the free Activation/Product Code:

  1. If you don’t already have it installed on your system, download and install the Origin game client from EA [it is similar to Steam and other game management interfaces] from http://origin.com/download
  2. Create an Origin account if you don’t already have one at https://connect.origin.com/create and log into the Origin client
  3. In the pull-down menus at the top of the Origin interface, click on “Origin” and then “Redeem Product Code…”
  4. In the white box [field] under Product Code, enter this:
    I-LOVE-THE-SIMS
    [hyphens may not be needed]
  5. You should then see a message that the activation was successful and you are the newest owner of  [oops, I forgot what year I’m in, I mean a temporally licensed user of]  The Sims 2, along with all possible Expansion Packs and Add-Ons
  6. Select the game in your My Games list in the Origin Client and install it by clicking the Download button that pops up [and if you’re like me, click OK to the Insufficient Disk Space message]
  7. That’s it! 

Enjoy playing The Sims 2 once again, experiencing all that this version could possibly offer.

Have fun with it and See You In The Games!

My trip to Hanoi, Vietnam

I returned to Vietnam to facilitate a 2 day planning workshop for the 6 organizations that I did the capacity assessments in January. It felt good to meet everyone and catch up. The workshop went smoothly and I had very positive feedback from the participants.

I was happy to see people genuinely interested and participating / contributing towards the workshop. This ensured a high quality of the results and the buy in by the participating organizations. I put the success of the workshop down to the following:

  1. The CEO / Executive director (ultimate boss) of the organization participated
  2. They had read the organization capacity assessment report and were familiar with the contents.
  3. They were guaranteed of a tangible workable plan at the end of 2 days.
  4. Being open and willing to learn

There is a chance that I may be requested to do some more work for them in the near future; however it seems that this is the end of this phase and the client is happy with the results.


The view from the roof top restaurant near Hoan Kiem Lake.

I stayed at the Trang An hotel; It’s in the center of Hanoi, near Hoan Kiem Lake, so quite convinient for walking around, shopping, finding nice restaurant, etc… Had a good time too.

My Free Font, Just For You™: LED SCREEN GTAMBLOG CAPS+ 2.0 (with Download Links)

An awkward name perhaps, for an odd little, simple version of an “LED Screen / Scoreboard Style Capitals Only” font (including Punctuation and Accents!) – but years ago, I contacted the author of a similar-styled font, to ask specifically for Commercial Use of his font, that looked somewhat like this one [I have been using it “Officially” here at The Blog since then – you can see Examples of it all over this site, on the images].

Today, I found Fontstruct, an easy-to-use, free, online Font creation utility – and thought “why don’t I make my own version this font, not only for ‘The Blog’ to use, but for others to possibly use as well?”.
And so, here is an ‘LED Screen’ or ‘Dot Matrix’ style font (also usable as a ‘Pixel font’) – with punctuation and a couple of ‘accents’ – but capitals only, as traditional LED Screens or Scoreboards (“Score Screens”) would have used; made by my hand, Just For You™…

I am distributing it as “LED SCREEN GTAMBLOG CAPS+ 2.0” by ‘Troy from The Game Tips And More Blog’, at various Font sites, such as those below (for Downloading, Updates as I add more and/or am approved by them). [If you prefer, contact me via email and I can also send you the TTF or Zip of the Font, from me, directly]:

  • Fontstruct (where I created the font by hand): 
  • https://fontstruct.com/fontstructions/show/1459839/led-screen-gtamblog-caps-2-0

  • Fontspace: 
  • http://www.fontspace.com/thegametipsandmoreblog/led-screen-gtamblog-caps-20

Feel free to Comment on those sites, or here (Suggestions, Questions, And More) or contact me via e-mail if you have any questions about the font, at:
[email protected]

Usage License: (Creative Commons, Attribution License, 4.0)
You are free to utilize this font for ANY purpose whatsoever, including Commercial Use and Monetization of any kind, Royalty-Free; the only condition being that you mention my name somewhere, anywhere, during use of this font.
If you would like to make a Donation, on behalf of using this font, you may do so via PayPal, using my email ([email protected]), but this is not required at all, to use this font for any purpose you desire.

As some of you may know, I have been playing around with Fonts off and on, creating them for various images/headers/etc here at The Blog over the years, compiling at least 4-5 fonts or so from scratch, with varying levels of completion… I ‘m not sure when I’ll get around to finishing all of them – but for now, I hope this font can perhaps be useful for some quick images, videos, or whatever you may want it for – Enjoy!

Edit:
 I may return and add some images and examples of the font… Soon™
Also, although I have made this font by hand at the Fontstruct website, I always suggest that you Scan any files you download (just in case), with an Anti-Virus utility of some sort – whether it is Windows Defender (built-in to Windows 10, after downloading) or via an online scanner/website, such as VirusTotal.com or similar.

And More: Deals and Sales – Guild Wars 2 is $24.99 Right Now

Woohoo! I have no idea when it started and no idea when it will end, but I just saw this with my own two eyes… if you are looking for one last reason to get GW2, it is now on sale for just under $25 American Dollars. That’s about £15 British Pounds if you are from the UK, руб890 Rubles if you are from Russia, 1500 Rupees if you are from India and what works out to be about $10,000,000 Canadian Dollars:

I just might get my own copy finally and be able to stop begging others to play theirs (you know who you are)… Go to http://buy.guildwars2.com/ to get it while it’s On Sale and See You In the Game!

ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

http://tywkiwdbi.blogspot.com/

Battlefield Hardline: Beginning July 15th, A Double XP Boost is Active ! [Notification]

Just a quick notification to notify those interested in Hardline to note that a Double XP Boost is Currently On! Note that the notification was noted on Battlelog, as of July 15th – unfortunately, I cannot tell at this time if it is a Premium-Only Boost or a Double XP Boost for ‘Everyone’, as I recently subscribed to Origin Access (to test it for one month, to see whether you ‘lose’ patches/etc that you have earned while it is ‘on’, which I will share as soon as I find out). Still, check out Battlelog and see if it is ‘on’ for you! http://battlelog.battlefield.com/bfh/ GOGOGO

See You In The Game!


[Update: As of July 20th, the Double XP Boost is now over… See you next time!]

Trip to Hyderabad Cont….

Well there are scheduling issues so will go to get my ticket & visa on thursday. Everything else is back on schedule. Trying to contact some of my friends who are in India so that we may be able to meet over there.

I have been doing this job since 2002 and travelling overseas since then; however this trip will be my first time on a budget airline. Dont know what to expect? When I got my online booking it said Meal – To be purchased. some how flying and buying your food did not sound OK to me. I am sure that what ever my first choice is it will be over by the time the airline staff get to me.

Anyway need to finish up all the stuff for today to be able to watch the opening match between Sri Lanka & South frica (ICC Trophy)

Eat more and more, do you know chemicals in foods blow you appetite?

In a very real sense, everybody has direct reactions to foods. Direct reactions are reactions caused directly to cells by chemicals in foods. Among the most obvious direct reactions are those caused by alcohol. If you drink alcohol, you are almost certain to experience sedative effects, due to the direct effect of alcohol on your brain cells.

Often, people with Asian heritage react quite negatively to alcohol, and the common belief is that they’re allergic to it. Technically, though, they don’t have an allergy; they have a sensitivity — because this is a direct reaction, which doesn’t involve the immune system. I believe that it’s clearer and more sensible to say simply that Asians often have a food reaction to alcohol, since food reactions include both allergies and sensitivities.

Diet Start

Direct reactions, however, can eventually involve the immune system, because sooner or later the immune system is called in to repair the mess that direct food reactions cause. Therefore, the symptoms of direct reactions can feel much like allergies. Because of this, direct food reactions are sometimes called false food allergies.

Alcohol has obvious direct actions, but most direct food reactions are more subtle. Often, direct reactions occur when chemicals in foods bind with the cells that produce histamine; these cells are called mast cells. When this happens, it can cause the release of histamine. The food chemicals that are most likely to do this are lectins, which are most often found in wheat, peanuts, and beans. Another cause can be certain partial proteins, or peptides, that are found in tomatoes, strawberries, shellfish, pork, chocolate, and eggs.

Other foods that often seem to cause direct food reactions are mustard, pineapple, papaya, buckwheat, and sunflower seeds. Ironically, one patient of mine had terrible digestive symptoms, including severe heartburn, and took large amounts of digestive enzymes to help the problem. However, his enzymes were full of papaya, which he later found he was reactive to. When he stopped taking the digestive aids, his digestion improved immeasurably. Moral of the story: don’t trust common knowledge about what’s healthy — trust your own experiences. Everyone is different.

Other foods that sometimes cause direct reactions are those that contain high levels of natural histamines. Histamines are formed in foods that are allowed to age and ferment. Therefore, histamines are often found in aged cheese, sausage, and salami.

Other foods that can cause direct reactions are those that contain the partial proteins tyramine, phenylethylamine, and octopamine. These chemicals, like histamines, can cause blood vessels to expand and contract, which causes tissue swelling. In the head, blood vessel constriction and expansion can cause migraine headaches. That’s why people who get migraines often shun the foods that are high in these partial proteins, such as wine, aged cheese, citrus fruit and yeast.

Another common foodstuff that often causes direct reactions is the artificial sweetener aspartame. Aspartame is mostly composed of the partial protein, or amino acid, called phenylalanine. In some people, it acts directly on brain cells, causing symptoms such as agitation and depression. In other people, it causes blood vessels to contract and expand, triggering migraines. In most people, though, it causes no reaction at all.

Many people also react to MSG, or monosodium glutamate, with headaches, nausea, dizziness, heart palpitations, and confusion. Others react to various additives, including nitrates, sulphites, and artificial food colours.

Another name for direct food reactions is pharmacologic reactions. That’s a good description, because it implies an important point: foods, like drugs, are chemicals. Not all drugs are good for you — and not all foods are, either.

Now let’s look at the last type of food reaction: immune complex reactions. This type of reaction is not well known. But it should be. It can be a killer.

Foods, like drugs, are chemicals. Not all drugs are good for you, and not all foods are, either.

The weight question

‘Those desiring to lose weight should perform hard work before food. They should take their meals after exertion and while still panting from fatigue … They should, moreover, eat only once a day and take no baths and sleep on a hard bed and walk naked as long as possible.’

Theories on the weight-loss benefits of walking around naked and not bathing have not been proven, but Hippocrates’ other dietary advice isn’t completely off the wall and shows that even 2,400 years ago, the relationship between food intake and energy expenditure was recognized.

Diet Start

Today ‘obesity’ is becoming universally recognized as a disease in its own right. Obese and overweight are terms that are often used interchangeably, but let’s clarify the difference between them:

¨ Overweight refers to an excess of body weight and includes all tissues, such as fat, bone and muscle, but not just excess body fat.

¨ Obese means that someone is carrying an excessively high proportion of body fat that could compromise their health.

If you are an athlete or body-builder, you may weigh more than the desirable weight range for your height, but this is normal because muscle weighs more than fat. Equally, you may be a relatively sedentary person who weighs in at the correct weight for your height, but who still carries too high a proportion of body fat. In this case, a good exercise programme is vital.

For those of you who feel that you are more ‘lard’ than ‘hard’, and don’t like what you are seeing on the scales, a better way of calculating just how overweight you are is by working out your Body Mass Index (BMI).

You can tell if you have surplus body fat simply by seeing if you can pinch more than 2.5cm (1 in) on your hips, tummy, underarms and back.

Alternatively, get your doctor or gym instructor to check out your BMI using callipers, or buy a set yourself from your local pharmacy. If you have more than 25 per cent body fat, then the chances are that you are carrying too much weight, or at the very least need to change your diet and participate in exercise that will burn fat and build muscle.

Successful weight loss and healthy weight management depend on sensible goals and expectations – losing just 5-10 per cent of your weight is the kind of goal that can help improve your health.

You may be wondering how you have got this far without hearing about calories. But you don’t need to become obsessed with the calorific value of everything you put in your mouth. Instead, it is much better to check food labels to see if the food contains unnecessary additives, sugar, hydrogenated fats and salt – and, of course, how high the carbohydrate content is.

Number Talks Book Study – Chapter 2

The farther I get into the book Number Talks, the more excited I am about implementing them next year. This is such a great resource, and I’m only on Chapter 2!

I’m linking up with Misty at Think, Wonder, & Teach for her fabulous book study. If you haven’t checked it out yet, be sure to visit her because she’s already offering some great resources to support the book (whereas mine are still works in progress!).

This chapter walks through some of the nuts and bolts of setting up number talks, and it describes how to manage some of the procedures and expectations. One of the sections that really resonated with me in this chapter was about building accountability with the students. So often, there are a few students who are eager to share their mathematical thinking, and there are many others who are willing to sit back and let those students shine. I don’t like pulling sticks with students’ names for something like this, but I also don’t want students to feel like they don’t need to participate. This book offered some great strategies for dealing with that:

1. Once all of the strategies have been shared, number them and have students show with fingers which one they found to be the most efficient strategy. This will get them thinking about the math involved.

2. Keep records of the problems posed and strategies used, and label them with the students’ names. I plan to use my iPad to track this. I’ve talked before about setting up student data notebooks on Evernote, and I think that would be the perfect platform to track student participation. I can photograph students’ work and add anecdotal records about what I observe. It would also be easy to share with parents at parent-teacher conferences.

3. Hold small group number talks throughout the week. As I prepare to transition into more of a math workshop/guided math approach, this seems like a very viable option.

4. Create and post anchor charts of the different strategies that students are using. The book names a variety of strategies, or you could develop names with your students. Having the charts available to reference could scaffold the less confident students.

5. Use exit cards. The authors recommend giving each student a notecard. On one side, students should record their solution, and on the other side, they should record a strategy that another student shared that they liked.

6. Give a weekly computation assessment of 5-10 problems. The selected problems should reinforce the concepts and strategies introduced throughout the week. I can also imagine using an app like Show Me or Explain Everything to assess. These are whiteboard apps that allow students to record audio on top of their drawing. Students could record their solutions and narrate them as if they’re presenting them to the class. This would be another important artifact that could be saved in the student’s Evernote portfolio to share with parents or an RTI committee. If it’s only one problem, most students would be able to complete the task on the app in 5-10 minutes as the video they’d be creating should be less than a minute long.

I think these accountability measures could be effective in getting students to participate more. Of course, the classroom environment will matter, too, and I look forward to setting those factors in place for my Number Talks this fall.

In other news, I’m excited to share that I’ll be participating in Sabra’s book study of Word Nerds at Teaching with a Touch of Twang. Word Nerds explores strategies for teaching vocabulary to students, and it’s another fantastic resource. It’s published by Stenhouse, and you can preview the entire book online or you can purchase the book in Paperbook or Kindle edition.

The book study starts on Thursday and runs throughout the summer. You can see the full schedule by clicking on the image above. I’ll be hosting Chapter 7, and I can’t wait!

Also, have you joined in the Teacher Toolbox Trio Linky Celebration yet?

You still have time to link up and be eligible to win a $25 Teachers Pay Teachers gift certificate! The linky celebration will close on Friday night, so be sure to join the fun. My wish list has definitely grown as I’ve seen all of the fabulous resources other teachers are sharing and recommending.

Personal Log: Might not be able to post for a bit longer still… [Editorial/Personal]


Personal Log, Stardate 20160901 [I have no idea how that works heh]

Just a quick Personal Note to say that I apologize to my dear readers for not posting anything for a while, and that I may not be able to post for a while longer yet… I have been experiencing a worsening of my ongoing symptoms… I may be okay in about week or so and finish up some Project irons I have in the fire; but I don’t know, it may take longer than that to get back up to the point where I can play and finish testing some recording programs I was working on, and post about it all…

< Potentially Sad Talking About Sicknesses Follows, In Case Of Feels, Stop Reading, Play Game >
I’ve never really mentioned what I have or what I go through before, since starting this Blog five years ago.. I didn’t really want to trouble people or put those thoughts/feelings on them, but I have had a few people ask me personally what it was – and I was looking something up recently about my condition (it’s a condition I (and Doctors as well) are constantly having to learn about) and I read quite a bit about other similar stories, where other suffers were in much worse condition than me… They were literally bed-ridden… And while I was also like that for the first couple of years, I have improved slowly over time to the point where I can sit up, and sometimes even play games, and on good days work on an article and do things around the house… 
My condition is Myalgic Encephalomyelitis, which is an infection of the brain and spinal column, which gives components of Chronic Fatigue (getting tired easily with a slow recovery rate (as in days) if I go to the store, etc) and Fibromyalgia (inflammation and pain in all areas of the body, like when you get a ‘flu’ and are sore all over? it’s that, all the time…heck, many of your Aunts or Mothers may have Fibromyalgia, so you may have heard about it..). It is not a well-known disorder, despite millions of Americans having it.

Every year I learn something new about it or studies that found out something new about it; but nothing is ever concrete on ‘how to get rid of it’, unfortunately. The only good part about that is, is that all Doctors have concluded that it is “something that goes away on it’s own, but noone knows when”… Some people have it for a year or so and some have it the remainder of their lives. I am in my 10th year now, but as I have said in the past, I try to always see the positive in things and I have been slowly improving overall, slowly over the years…

I don’t want to make anyone feel sad, I am sorry if this information does… I merely wanted to inform my readers that I may not be able to post things I have been working on for a while longer… Some of the things I was working on are: GPU-Accelerated Game Recorder Comparisons (Playclaw, Bandicam, Mirillis Action, D3Dgear, and more), First Impressions of some games that I started work on already (The Elder Scrolls Legends Closed Beta, Dropzone Closed Beta, A Return To The Elder Scrolls Online (I was in the Beta for it) and others), bringing back the “Can You Guess Where The Screenshot Below Is From” (there have been no winners so far and I have some Giftable Games a-waiting on Steam and GamersGate) and even more projects that I don’t want to mention yet – to keep them a ‘surprise’, heh).

I enjoy writing my articles and posts here, helping others with the information I have figured out, found or collected, doing testing, giving tips of games and even Video Editing and showing effects of settings in both, including also creating the Headers and graphics utilized here (they are all done by me)…
I plan to continue doing this for a long time to come… I just realized there has not been much the past little while and wanted to let you all know there may not be some yet for just a little bit longer (‘recovering’ from a Cold or “doing too much” takes about a week or more each time I do something or get a cold, to get back to where I was, with this illness, everything takes far longer..).
Thank you for your patience, my wonderful readers, and I hope that I can contribute helpful information again for you, in the near future.

Sincerely,

~Troy from The Game Tips And More Blog

And More: Corel’s VideoStudio – Crashing When Using ‘Open With’ To Import Clips Into VideoStudio [Fix/Workaround]

Just last Month, I picked up version 20 of Corel’s recently-updated video editing suite “VideoStudio” (nomenclature “X10”) and am having a lot of fun learning what it can do and how to do it all (coming from mainly editing videos with Sony’s Vegas ‘Movie Studio’ line of products [now taken over by MAGIX]). However, I quickly ran into a little issue with importing clips using the “Open With” option in Windows and wanted to share what I found…

Normally, in Windows you can ‘right-click’ a video file and mouse-over the menu option “Open With..”, which brings up a sub-menu of known applications, to ‘send’ the file to (‘opening the file with the chosen application’). Doing this, whichever application you select will startup and the file will be sent to it to work with.

However, doing this with a video clip and VideoStudio x10 I found, every time the program would open up, it would immediately ‘crash’ (close/stop/etc). Hmm… time for some Troubleshooting! I double-checked that the file in question was not corrupted excessively by playing it, testing it in a couple of video/media players, and even tried a few other clips that were ‘known good’ (that VS worked with before). Each time, using “Open With…”, the Splash Screen for VSx10 would show up and then just as the program itself looked like it was opening, the entire thing would crash and show this message:

Example of the “Corel VideoStudio has stopped working” Error Window Pop-Up
when trying to import a clip into VideoStudio X10 utilizing the “Open With” shortcut in Windows

I then went to the Corel ‘Official’ Fora [Forii?] and did some searching to see if anyone ran into this same issue. Unfortunately, all I could find were people experiencing ‘general crashes’, that is, crashing and non-starts without it being specifically associated with utilizing “Open With..”.

I then decided to try these same ‘testing files’ on some other video editing programs I have installed, such as Sony’s Vegas Movie Studio (now owned by MAGIX, the same company that makes the Movie Edit Pro product line, which I have no experience with yet, at this time). Using the “Open With..” command, Movie Studio was able to open and import all of the video clips without issue – so then, what’s up Corel? /tilthead

I thought of trying VideoStudio ‘on it’s own’, not importing or ‘sending’ anything to it – just opening the program and seeing if it works… Everything opened fine! I was just playing with the program the other day in fact, learning some of the features it offers [I’ll have to write a short ‘Review’ or at least a ‘First Impressions’ sometime of it]. So why was it being ‘fussy’ (to use the highly technical term)? I tried opening and closing the program a few times thinking about it, when I noticed that when I opened VideoStudio X10, I was being greeted by a nice-and-helpful “Welcome” StartUp Page…

The “Welcome” Section of VideoStudio
(Click to see Full Size)

Indeed, ‘The “Welcome” Startup Page’ offers a lot of helpful information on opening VideoStudio. There are Tutorial videos on some of the New Features for that version and even Basic Tutorials and Help File links. But wait – no editing interface! No Timeline, no Media Library to add clips – that’s it! That’s the problem! I went into the Settings to see if there was a Preferences option where I could set the Section to open VideoStudio to be – not the “Welcome” section, but the “Edit” section – the tab/area where all of the editing/mixing and importing takes place. There it was: Default Startup Page – and it was set to “Welcome Book”…

The Corel VideoStudio X10 Preferences Window
showing the Default Startup Area/Section which is shown when the program starts
(Click to see Full Size)

A simple pull-down menu change to “Edit” and that was it! Now, VideoStudio is opening to the “Edit” section/area every time. So, I tested it out: right-clicking on my video clip and mousing-over “Open With..” and then clicking on “Corel VideoStudio” – it worked! VS opened up and in a few seconds more, my little video clip was right there on the Timeline, waiting patiently to be edited. Woohoo!

Example of Corel VideoStudio x10 Starting Up In The EDIT Section
(Click to see Full Size)

Here is a video version of the steps above, made showing the error when trying to use “Open With..”, what happens and how to change it, as well as the final ‘working’ result of changing the option (after I finally figured out what it was):


[VIDEO NOT YET COMPLETE, IT WILL APPEAR HERE ONCE FINALIZED AND UPLOADED TO YOUTUBE]

Hopefully this will help any of you dear readers, who use VideoStudio and were running into this error/crash/issue when opening clips with VS (trying to use “Open With..”).. Enjoy and Have Fun editing your gameplay clips once again!

~Troy from The Game Tips And More Blog


[I’m calling this a Workaround, since this is more of that than a true ‘Fix’… It does not solve the base issue of VS not being able to import a clip using “Open With” without taking taking these steps (whether this is more Microsoft’s fault or Corel’s fault is beyond the scope of this post …and being more experienced in computer hardware than computer software (programming, etc), I would not have completely isolated the very base cause of the issue anyway – or at least, could not offer a 100% explanation of what is occurring)]


Note: I am not affiliated in any way with Corel and I have not, and I will not, be compensated for mentioning VideoStudio or any other of the products herein, in any way.  I have used other video editing products than these in the past, and will do so in the future, including free editing applications, such as VirtualDub, AviDemux, DVDVideoSoft products and more… I am merely an enthusiastic gamer-and-sometime-editor and wanted to share information that I discover about these products to help other gamers record-and-edit and have fun doing it, if I can do so.

The link between carbohydrates and insulin resistance

The hormone insulin plays a major role in the metabolism of carbohydratesand their conversion to energy in the body. When you eat carbohydrates, they are converted into glucose in the bloodstream, which triggers the release of insulin. This virtually escorts the glucose to the body’s cells, where it can be used as energy. If there is too much glucose, the insulin turns it into glycogen, which is stored in your muscles and liver ready to be converted back toglucose when it is needed.

However, in the high-refined ‘carob’ world in which we live, we often have too much glucose floating around in the bloodstream, and then insulin converts it to fat. And our body cells may become so flooded with insulin that they cease to be responsive to it, so the pancreas keeps producing more and more insulin in an attempt to get energy to your cells. This is known as ‘insulin resistance‘.

Diet Start

Over a period of time, less and less glucose gets used as energy, and more and more gets laid down as fat. Since insulin also sends messages to the brain to tell you that you are hungry, more and more insulin means increasing cravings for carb-laden food.

The only people who are benefiting from refined foods are:

  • The dentists who have to patch up your decaying teeth
  • The pharmaceutical companies who have to sell you drugs to sort out the symptoms of your ailing immune system and your susceptibility to chronic and degenerative disease
  • The food manufacturers, who are only really interested in profit. If you add to this a high intake of caffeine, alcohol, smoking and a lack of exercise, then you will almost certainly be taking a wobbly walk down the road to ill health.

Is it enough just to cut out refined carbohydrates?

Totally banishing all things processed and adopting a healthier diet based on fresh produce is a definite start, but if you have a weight problem linked to insulin resistance, it may not be enough, because if you are still eating a diet that is too high in the wrong sort of carbohydrates — coupled with not eating enough protein or fat to slow down the rate at which these excessive carbs are hitting your blood-sugar levels — you will still have problems. A low-fat/high-carb diet can give you a nasty shock every time you jump on the scales.

The thing to remember is that all carbohydrates have an effect on your blood sugar, and every gram of carbohydrate consumed is equal to one gram of glucose in your bloodstream. So if you are eating more than your body can burn for energy, or can safely store as glycogen in the liver, the rest will be turned to fat.

The key factor in balancing blood-sugar levels and banishing thesymptoms of insulin resistance is controlling your intake of carbohydrates. In order to do this effectively you need to know which ones have the greatest impact on your blood sugar and which do not.

Initially, this will need a little time and effort on your part as you learn about the different sorts of carbohydrates. You may find that the changes you have to make to your diet are quite drastic, but before long — as you start to feel and look better — you will be amazed at how little you miss the wrong kinds of carbohydrates such as processed and sugary foods. Youwon’t feel the need to pile your plate high with potatoes and pasta, because your newly balanced blood sugar levels won’t be crying out for acarbohydrate fix.

Mt Trip to Manila, Philippines cont……..

I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

And More: Share and Tell – Imitating The GTAV Title Logo Style [Commentary]

I recently created a logo for The Blog, done in the style of the GTAV game logo (Grand Theft Auto Five Title Logo, seen Left). I had a lot of fun figuring out how to imitate the look of it and wanted to share a bit of how I did it, in case others want to give it a try too, or just to enjoy the ‘Behind The Scenes’ story of things… Originally I was creating this to be used on Headers for posts here at The Blog (since I was playing GTAV lately), but I also put it on a Wallpaper posted at The Blog’s Flickr page – but then decided that from now on, I will not put ‘my logo’ on Wallpapers that I want to share with everyone, I will just use whatever game logo the game is at the time, reserving ‘my logos’ mainly for use here [I was feeling bad for ‘forcing them onto others’ if I were to put them on Wallpaper for sharing with everyone…]

Just below this paragraph then, is The Blog logo, re-done in the style of the game logo from the game GTAV (Grand Theft Auto Five)… Created entirely in Corel’s Paint Shop Pro, I first had to find a font for the lettering. I found a few of them (Pricedown is one, GTArussian is another, the name of the last one escapes me at the moment). I typed out each word separately, so that I could place them really close together (like the GTAV logo has for its’ words), overlapping some of the ‘tails’ of the text (which was fine, for me). The “B” behind the ribbon was something else… Baskerville, that’s it.

My version of The Blog logo, done in the style of the GTAV game title logo
(Click to see Full Size)

The ribbon was its’ own element, blanked out (white with no text), placed on top of the “B”, which itself was made in layers of outlines and a Gradient, using the original game title logo (“GTAV”) as the source for the green shades (clicking with ‘the dropper’ on the far sides of the green area in the “V” in the GTAV logo). The spiral design was found online by an anonymous maker [let me know if it is you, I’ll give you Credit!], which I had to colourize and then placed in a way that was similar to the GTAV logo, on a layer below the text “B” vectors, so that it ‘shows through’ within the “B” area.

The text on the ribbon was made with a font that escapes me at the moment, but the colouring for it was hard to figure out, as it looks like it is directional (as though a light were casting highlights from one direction). I figured out to use the Bevel effect in the Layer Styles of Paint Shop Pro, to emulate a light source coming from the bottom-left, for the text ‘The Blog’. It turned out great for imitating the lighting on the text ‘Five’ in the GTAV game title logo ribbon! The hardest part was getting it to ‘curve’. I don’t know how to create a line and make the Text follow the line yet, so I simply used the Mesh Warp function, to ‘move it around’ manually and get it to seem at least a bit like it is curved.

A few layers of black and grey for ‘outlining’ the text and entire composition (made by ‘expanding’ the selected text and then Filling with Black or Grey, moving the white text in front of it each time) and it was complete…

I’ll mainly be using it in Headers and Screenshots in posts almost exclusively here, at The Blog. I just thought that some might like to hear a bit of ‘Behind The Scenes’ or ‘Commentary’ about it – hey, there are a lot of people that (like me) watch Commentaries! Haha

I hope you enjoyed my little Share and Tell – and if you play GTA Online – See You In The Game!

Original GTAV game logo design by Rockstar, Take-Two Interactive

[Personal Note/Declaration: I am not associated with, nor do I receive anything in any manner or form, for mentioning Corel or Paint Shop Pro. I am merely an enthusiastic user of the program (I have played with it off and on since it was owned by JASC). For fairness and completivity, I shall mention another great graphic editing program, The Gimp (now just called GIMP?) – which is Open Source and entirely Free – all of the steps above can also be performed with this free program]

Innovative Office Furniture Sets Were Designed by Vitra

These new and innovative office furniture sets were designed by Vitra and are basically practical approaches to the concept of “Citizen Office”.

Innovative Office Furniture SetsInnovative Office Furniture Sets

Innovative Office Furniture SetsInnovative Office Furniture Sets

Innovative Office Furniture SetsInnovative Office Furniture Sets

Innovative Office Furniture SetsInnovative Office Furniture Sets

This term was invented by the company in 1991 and taken to another level with the furniture collections below. Jo Kaiser (manager for the North American branch) gave a statement which summarizes the idea of the project: “we believe you should use an office like you would a city”. In other terms- more comfort while making the most of the available space. Here is further information from the company: “A Citizen Office encourages the occupants to work using a range of postures and to move within the office as much as possible. Working while standing or assuming various casual postures provides variety and relaxation while maintaining employee health. The Citizen’s Office takes us a step further than traditional ergonomics – physical activity is integrated with office etiquette in a natural manner. “

a passenger train in India had a most unusual issue, 22 carriages carrying 1000 people, got disconnected from the engine, and the emergency brakes didn’t work to stop it, it rolled backward 7 miles

http://www.bbc.com/news/av/world-asia-india-43697965/engineless-runaway-train-in-india-gives-passengers-a-scare

Georgia Bloggers Meet-up

I was thrilled to get the opportunity to meet up with some other Georgia bloggers yesterday thanks to the organizational efforts of Jayne at Smart Kids. You see, even though I’ve been MIA from the blogging world a lot this year, blogging is always on my mind. Really.

This year has been a whirlwind as I’ve juggled teaching full-time, parenting, and starting my PhD program. Virtually everything I’ve written this year has included a bibliography, and that hasn’t left a lot of energy for my blog. But when I’ve been researching and writing for my academic pursuits, I’ve been learning all about theories of professional learning and how our online encounters fit into that. I must say, there hasn’t been a lot written about teacher professional learning through blogging, and that’s a gap I intend to fill. More people need to know about the amazing teachers supporting each other through social media. They need to know how that process is 10 times better than any other form of professional development and how it empowers teachers to become better at their craft by pursuing their passions and interests.

So when I say that blogging is always on my mind, I really mean it. It’s been at the heart of every paper I’ve written as I work on my PhD. When I got the chance to go meet some fellow bloggers, I couldn’t say no.

The meet up was at Georgia School Supply in Macon, GA–about an hour and a half away from where I live. I was excited to go and meet some fellow bloggy friends because it’s always so good to be able to match names and faces and to remember that there are some real live people with amazing ideas that are working in classrooms, too. I’d never met any of the people there, so it was a real treat.

We talked about our secret lives as bloggers and TpT’ers, shared tips and strategies, made business plans, swapped products, and had an all around great time. I love meeting other bloggers and learning how much we have in common. Everyone I met yesterday was wonderful, and I look forward to keeping in touch with these new friends!

I hope to be blogging more this week as my student teacher takes over EVERYTHING from now through spring break (woot! woot!). In the meantime, be sure to check out the blogs from the amazing people I met yesterday!

Jayne, Kelly, Angie, Stacy, Tara, Valerie

PhotobucketThe Teacher Wife

Funky Fresh Firsties

...And They All Fall Down...

Georgia Grown Kiddo's

Jennifer, Carol, Kathy, Meghan, Kim, Irma, Megan


 
 

Michelin, Jessica, Greg, Erin, Alison

 

Battlefield 1 – DirectX Error “GetDeviceRemovedReason” [Workaround]

At first, because of the phrasing of the error, I thought it might be Hardware, namely my GPU (Graphics Processing Unit, the Videocard); but since that was working fine with literally, all other games – playing in longer gaming sessions even [and I know for sure that I wasn’t actually physically pulling out my videocard while playing …I think] – I omitted that possibility (for now) and focused on a potential Software approach, which meant checking configuration…

Looking at the Settings for the game then, I tried reducing everything down to the Lowest Possible Settings; to reduce the load on the GPU and the load in the processing of the game itself. (With lowered settings, there would be less data being streamed from the game, less being extracted from the compressed/encrypted files of the game, less being calculated and drawn, less everything). If there was a problem with how game data was being handled, this might being it to light [note: an issue with integrity of the files would not be detected this way, this is more of a data handling troubleshooting step; integrity of the game files can usually be checked/verified with a Repair/Verify through the game client or if that doesn’t help, a Reinstall of the game usually assures accurate game files (barring Drive/RAM file handling (Hardware) issues – which is another tangent/issue altogether, heh) – screenshot of where to run a Repair/Verify of the game files for BF1, below].

Example of the Location of where to Repair the game files in the Origin Game Client, showing Battlefield 1 in 2017
(Click to see Full Size)

Nope. Crash. Error [which I lost the clean Screenshot of, of course – but a version of it is in the Header for this posting – I will add a clear Screenshot of the error window to this post when I can capture it again, if it occurs]. Hmmm…. Since it was a DirectX error (and I am 93.33-repeating-percent-sure that I did not “remove the video card” while playing..), I tried one last thing. Instead of swapping out the GPU to try with something else (a GPU from a friend’s PC, for example), which is approaching a Hardware type issue; I tried something else: I changed the DirectX level in the game from DirectX 12 to DirectX11 [this may not have been solely ‘my idea’ – although I am sure I would have eventually arrived at it as a troubleshooting step, I looked up this error and found many, many locations and sources of others stating they have this issue and encountered this error and I may have read it somewhere, for it to have come up – merely mentioning because I just don’t want to take sole credit for something I may not have come up with entirely by myself…].

Example of where to ‘Disable DirectX 12’ and ‘Enable DirectX 11’ in the Video Settings, in Battlefield 1
[Hmm, this is more of a Workaround than a ‘Fix’ for this issue…]
(Click to see Full Size)

Success! I played a good couple of hours this way, with no crashing, closing, freezing, or errors at all – great! After trying it after re-opening the game, rebooting and playing some more, testing it the next day or two after as well, it seemed ‘solidified’; changing the DirectX level/version from 12 to 11 seemed to ‘solve’ the issue [for me, for now].

I think this is more of a ‘Workaround’ than a ‘Fix’, since it doesn’t solve the issue permanently… there is still something in the game engine or how it communicates with DirectX/Windows/theGPU, which is causing something that is not ‘fixed’ by this step; but, since it does work to get past the issue, I thought I would share, to help others that may be running into this seemingly-popular problem (‘popular’ judging from the queries I found about this issue on both the Battlelog forum and EA Support Forums, spanning a few years now..). I hope this works for you, dear reader, as it seems to have done, for me.

[Since this is not a true ‘fix’ (I do not know if this is permanent nor do I know the actual source/nature of the issue, therefore I cannot say this is a ‘fix’, imo); I will post this with the title “workaround”…]

Addendum:

Other helpful tips/steps that can possibly help, if the above step does not work (and some additional information), can be found in multiple places on the Battlefield and EA forums, such as this list by a helpful poster named STEEiL:
https://forums.battlefield.com/en-us/discussion/54605/directx-function-error-amd-getdeviceremovedreason-error-in-battlefield-1

Good Luck – I hope it gets working for you soon – and See You In The Game!

Modern Side Table Lamps Design

If you are an artistic creation lover then you must observation for modern side table lamps. It has a funky look which might make you feel as if you are in around future time or in space. Its abstract and artistic design complements the other paintings and art fashionable your home along with elegance and beauty.

If you’ve a woody environment at your home base decorated in Indian style, then western table lamp design is the best choice for you. The western table lamp comes in a cowboy sort of look. Either there is a cowboy along with a horse of just a horse attached on it. This gives a very classy look to the woodsy type of a house.
Country style reminds you of Country music only but you can also find a country style table lamp also. It’s farm animals alike cows, cocks and others designed on it. It is considered to be the most colorful sort of lamp with natural color and scene.

Oriental lamp shows much about Asian culture in its design. The unique Asian roots can be seen in this type of lamp and would best fit if you have a room filled with Asian souvenirs.
Choosing the perfect table lamp for every room should be your concern as their being complementing the living furniture makes out the atmosphere. There are various styled table lamps for your side tables like western table lamp, modern, urban, Asian and nation but to pick the better for every room needs examination and time. Here is a little guideline for you:
Now you have a selection of lamps from which you can choose the best for your place. Take care of the existing decoration of your home when you choose the side table lamps.

What Kind of Protein is Best?

There is a lot of confusion about “superior” and “inferior” proteins—so called “complete” and “incomplete” foods. At the beginning of the century, researchers doing animal experiments discovered that rats could live and grow on a single food such as eggs. Eggs, like meat, fish, and cheese, were therefore dubbed “complete” proteins. Vegetable foods such as rice, legumes, seeds, nuts, corn, and wheat were called “incomplete” since on their own they were unable to maintain life and growth. What all this meant is that the so-called “complete” proteins contain all the eight acids which humans cannot make for themselves in adequate amounts. But what they didn’t take into account is that vegetable food—say, corn— together with another—say, red beans—also contains the eight essential amino acids and, provided you eat one vegetable together with another, you are getting the full complement of the eight essential amino acids in good balance. Better still, you are getting them without the fat that accompanies protein from animal foods. The idea that we need animal foods in order to be healthy is simply untrue. Populations numbering in the millions in different parts of the world have lived and developed enviable health and strength for thousands of years on a purely vegetable diet.

Diet Start

The best—and often the cheapest—sources of protein are the unrefined, unprocessed vegetable foods—complex carbohydrates complete with their natural fiber content, vitamins, and minerals—whole grains such as rice, wheat, oats, barley, legumes including lentils and beans; mixed seeds or mixed nuts; fruits, and vegetables from salad greens to carrots and potatoes. Eaten together in salads and casseroles, bread and soups, they provide low calorie menus without the danger of high fat from the intake of animal foods. The Lifestyle Diet provides 15 percent of your daily calories in the form of protein. It allows you to eat four ounces of meat, fish, or poultry (preferably fish) three times a week. On the days when you choose not to eat these foods you can have instead four ounces of mixed nuts or two eggs. It completely eliminates all cheese except those such as cottage cheese and curd cheeses made from low-fat milk.

If you prefer, you can take all your protein from vegetarian foods. The question of a vitamin B12 deficiency on a vegetarian diet is always brought up as evidence of the need to eat meat, although long ago biochemist Schweigert of the American Meat Institute researched the question and discovered that the need for B12 rises and falls with the amount of protein eaten. B12 is available in dairy products and eggs included in the Lifestyle Diet. In this kind of protein-economical diet it is correspondingly low. Schweigert also discovered that the whole wheat grain is a usable source of B12 provided it is not processed into white flour. If it had not been, then the millions of people in different countries who have lived almost exclusively on a vegan diet (vegetarian with no milk, dairy products, or eggs) would have suffered B12 deficiencies.

The Vital Acid—Alkaline Balance continue…

Excess salt intake can also severely upset the body’s water balance. Along with potassium, which also occurs naturally in fresh foods, the sodium in foods and in salt itself (which is sodium chloride) plays an important part in the movement of electrons through the body’s water- based protoplasm. This is why sodium and potassium are known as electrolytes. Potassium tends to concentrate in the cells, sodium in the fluids outside the cells. The balance between sodium and potassium, when it is right, sets up a dynamic tension that makes it possible for the living cells to react quickly and efficiently to nerve stimuli, to exchange nutrients and wastes easily through the cell wall, and to maintain the proper interior and extracellular water balance. Too much sodium, which most of us get from eating salt, upsets this balance altogether and can cause troubles. It forces the body to hold on to extra amounts of water to make up for the extra salt one has eaten. Tissues become bloated, and this salt-caused edema can interfere with the blood’s oxygen transfer to cells as well as creating extra pressure against the blood vessel walls themselves. These are some of the reasons the Lifestyle Diet eliminates salt both in cooking and at the table. It relies instead on fresh and dried herbs, garlic, and spices for seasoning.

Diet Start

Throw out the Coffee

Caffeine, a trimethylated xanthine, is found in coffee beans, tea leaves, cola nuts, and cacao, from which chocolate is made. Together with nicotine and alcohol, it makes up a trio of the most widely used psychoactive drugs in the world. The xanthines are stimulants to the central nervous system. They increase heartbeat rate, increase the volume and concentration of acid in the stomach, relax the smooth muscles in the body, raise blood lipids, stimulate the cerebral cortex (which means they heighten the intensity of mental processes), banishing drowsiness and feelings of fatigue. Caffeine and alcohol also have a diuretic effect on the system, causing frequent urination.

The average cup of coffee contains between 100 and 150 milligrams of caffeine per cup, instant coffee somewhat less, tea between 60 and 75 milligrams, cola drinks between 50 and 60 milligrams. This means that if you are drinking four or five cups of coffee each day you are getting a dose of 700 to 750 milligrams of caffeine. To any pharmacologist a dose over 250 milligrams is considered large, although about a third of people in the West get twice as much each day and one person in ten actually imbibes more than 1,000 milligrams of the drug caffeine every twenty- four hours. The full long-term implications of drinking coffee (and, to a lesser degree, tea and cola drinks) are still not clear. However, enough is known already to inspire any woman concerned about the preservation of her health and beauty to give them up completely. For caffeine is a stimulus you do not need on a healthful low protein, low-fat diet high in unrefined carbohydrates.

The link between caffeine intake and anxiety symptoms has been well established. Dr. John Greded, associate professor of psychiatry at theUniversity of Michigan, and his colleagues and others have reported that high caffeine consumers have statistically significant elevations in anxiety scores. The risk of developing peptic ulcers is also 1.4 times greater among coffee drinkers than among non-coffee drinkers. There is now evidence that coffee consumption by pregnant women can be dangerous to the unborn child Caffeine has been shown to cross the placental barrier where its mutagenic and perhaps even teratogenic potential may cause genetic changes and, therefore, birth defects.

Finally, a daily intake of caffeine from coffee drinking is the same as continuing to supply your system with any other drug to which it has to adjust and which ultimately it has to detoxify and eliminate. One of the main principles of any long-term diet for health and beauty is, never add to the body anything which is not necessary and with which it has to deal. The fewer toxic substances there are, the less contribution they will make to tissue sludge, premature aging of skin, and the subclinical vitamin and mineral deficiencies which result in falling hair, breaking fingernails, chronic fatigue, and mental disorders. In the Lifestyle Diet, coffee, tea, cola drinks (even those without sugar), and cocoa are out. Instead, you can drink mineral waters, herb teas (but always in moderation since some of them in excess may not be good for you either), fresh fruit and vegetable juices, and coffee substitutes made from roots and grains.

My Trip to Vietnam

I am on my way to Vietnam for an organization capacity assessment of a multilateral organizations’ branch office as well as their partners. I had few tense moments in getting my visa on time but everything worked out. This will be my third trip to Vietnam; my first trip was back in 2005, my second trip was in 2007.

The first trip was to train the senior management of the largest ministry in Vietnam on Sector Wide Strategic Planning. I recall that my liaison officer was very hospitable and took me around Hanoi every night. I had to sample the snails, frog, cat and dog in a variety of restaurants, washed down with copious amounts of snake wine. It was one of the most memorable assignments for me and I made a lot of friends there.

My second assignment in Vietnam was to train and conduct an organization capacity assessment along with the senior management of a ministry in PDR Lao. As a perk to the staff the training was moved from Vientiane, Lao to Hanoi, Vietnam.

Doing a Strategic Plan / Organization Assessment in a communist country is quite different. There is no Institutional landscape for you to influence or lobby. There is the communist party line and laws and statues based on them; everyone has to live within these boundaries. Influencing and lobbying can be considered political subversion and it is not practiced by organizations. Even when dealing with the private sector you and your competitors have to live and operate within these bounds. It can be argued that this is indeed a very controlled level playing field.

I am looking forward to doing this assignment.

My Trip to Bangladesh June 2011

The assignment in Bangladesh is to evaluate the performance of a department within an organization. The interesting aspect is that the objective / mission of the department is, Organization Development of its other departments as well as partners of the organization. It’s going to be an interesting assignment. This will be a long assignment where I will be staying for 4 weeks in Bangladesh and travel to the north of the country.
The journey here was uneventful and arrived at my hotel tired but happy to be here. I am staying at the Asia Pacific Blossom Hotel; http://www.blossomhotel.net/ this will be my second stay at this hotel. I stayed at this hotel in 2006 during my first assignment in Bangladesh.
The assignment itself got off to a tuff start as the day of the launch of the assignment was a “Strike Day” in Bangladesh and apparently there are more strike days planned in the coming weeks. I am no stranger to Strikes / Harthal in Bangladesh and was in the thick of them when I was here on assignments in 2006 and 2008. At least this time it’s in support of oil and gas committee on the ConocoPhillips deal. The once planed during the week is for political issues; these tend to get violent and can be dangerous.

Math Resources for Teachers

It has been a whirlwind couple of weeks! I went on a mini-vacation to a wedding in Nashville, and then I attended a 3-day workshop on The Role of Mathematics in the International Baccalaureate Primary Years Programme. I think this is the summer of math learning for me! I love attending workshops because I almost always leave with new ideas and new resources to explore. Even if you don’t work at an IB school, there were lots of useful resources worth exploring.

(Apologies in advance — this will be a long post!)

Book Resources

A Mathematical Passage: Strategies for Promoting Inquiry in Grades 4-6

This book was featured because of it’s Mathematician’s Bill of Rights on p. 139. The Bill of Rights lists the “rights” that all mathematicians have — things like “solve problems in ways that make sense to me” and “capitalize on mistakes as sites of learning.” I’m definitely interested in reading more from this book. I’ve read other things by David J. Whitin before, and they’ve been great.

Math Matters: Understanding the Math You Teach Grades K-8

I had a chance to browse this book during the workshop, and it looks like a good one for understanding how to approach math conceptually. May not be the most exciting read in the world (would you look at that front cover?!), but it looks like a very useful book if you’re going for an inquiry oriented math classroom.

Good Questions for Math Teaching



This book is great for creating open-ended questions that will really get students thinking about the math involved in problem solving rather than just looking for a specific answer. It uses questioning techniques to develop more sophisticated mathematical thinking, and it has a wealth of information.

Number Talks

I was a little surprised how many teachers at the workshop were already familiar with this book and using it given that I’m usually up on all the latest and greatest math books, but nevertheless, this book had rave reviews. Of all the books that I’m reading this summer, this is the one that I suspect will have the biggest impact on my teaching this August. I’ve really enjoyed reading it, and I have so many ideas about how I will put it into practice this year. If you haven’t gotten it already, I couldn’t recommend it more!

Good Questions: Great Ways to Differentiate Mathematics Instruction



I know I’ve talked about this book before, but we spent a lot of time talking about open questions and parallel tasks at the workshop, so I had to share this book again. I used this book non-stop at the end of the school year, and I loved how it was so perfectly aligned to Common Core in math. It couldn’t be more teacher-friendly.

Online Resources

Visible Thinking Routines

I’ve been introduced to the Visible Thinking Routines from Harvard’s Project Zero before, but it was good to be reminded about them. These are some great activities to prompt student discussions and thinking. One example of this is “OTQ – Observe, Think, Question.” For this activity, students see a picture and spend a few minutes describing what they see/observe. Anything they observe has to be rooted in the picture and not based on inferences. Step 2 is “Think” – what does this make you think about? This is where students can share their inferences and cite evidence in the picture to support why they think that. Finally, students “question” and share what they wonder about based on the picture. I like that these routines slow down student thinking.
Math Class Needs a Makeover

We watched this video in the workshop, and if you’ve never seen it, I highly recommend that you take the 10 minutes to watch Dan Meyer’s TED Talk. In it, he talks about the problems with current approaches to math instruction — largely fueled by larger textbooks and math programs — and how to turn those materials into the types of problems that will challenge your students to become patient problem solvers. I was really inspired by this video, and I hope that you will be, too.

Have a great weekend! I’ll be back to blogging more regularly next week!



Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

5 Ways to Use iPads in Math

Today I’m linking up with the Tune into Technology Linky to share some ways to integrate technology in Math. Since I teach in a 1:1 iPad fourth grade classroom, I’ll focus on how we use iPads in Math.

1. Build a Math Notebook in Evernote



Evernote is my all-time favorite note-taking app, and that extends to math as well. In addition to typing text notes, students can attach documents (handouts, activities, etc) that they’ve viewed on their iPads and they can also take pictures through the app or attach pictures from the camera roll. That’s helpful when they build models with manipulatives and want to archive their work.

2. Reinforce concepts or conduct inquiry research with math movies.

BrainPop
Khan Academy



Two of my favorite apps to use in math are BrainPop and Khan Academy. I often use these to introduce a lesson or to differentiate instruction. I often feel like I get stretched pretty thin during math instruction because I have such a range of skills in my classroom, but these apps help. If I’m working with a student and a second student needs help, I can direct that student to a video on Khan Academy and encourage the student to see if that will help him or her figure out the problem until I can get there. Often the additional examples help the student understand the problem better.

3. Make math movies to assess understanding

Show Me

Explain Everything

I often ask students to show their solution to a problem on an app like Show Me or Explain Everything. There they can model their thinking using pictures or drawings, and they can record their voice as they explain their work. I learn so much about their understandings through their explanations, and it helps to assess the Standards for Mathematical Practice included in the Common Core.

4. Make a Vocabulary Notebook in Keynote

Keynote


I like to use Keynote for their math vocabulary because we can create slides that use the Frayer Model for vocabulary instruction. In addition to typing definitions, examples, and non-examples, they can draw their own pictures on a whiteboard app, take a screenshot, and add them to the slide. They can also search for real-world examples to photograph and add. Once they’re finished, they can easily alphabetize their entries by rearranging the slides.

5. Use QR codes
Our math word wall has QR codes linking to the definitions of each term so students can quiz themselves about the meaning of a term or review terms they’ve forgotten. If you click on the image below, you can get a freebie example of this for the properties of multiplication.

My complete sets for grade 4, grade 5, and 4/5 combo are available at my TpT store.

We’ve also written riddles in Geometry where students could scan a QR code to find the answer. You can read my post about that here.

And we’ve used QR codes to help check homework assignments. I’ve written about that here.

I’m really just scratching the surface here — there are so many other possibilities and several math specific apps to use, but I’ll save those for future posts. I’m excited to read other examples of integrating technology into math, though, and if you haven’t visited the linky yet, you definitely should. I got so many great ideas for reading and writing from it last week!

How do you use technology in Math?

My Trip to Thailand

When traveling east from Sri Lanka I generally travel through Thailand and transit in Bangkok. However I rarely get an opportunity to meet the people on the road as I am in a rush of checking in and out of hotels and flights. In April I was in Bangkok for a training assignment and had the opportunity to interact with people in Bangkok. I enjoyed the interaction with shop keepers and street vendors. However, I saw a significant difference in the pulse of the ordinary people. There was a more tense feeling with quite a high degree of uncertainty given the political situation in Thailand. Even though the current Prime Minister has promised to hold elections the majority of the Thais feel that the Army has started a war along the Cambodian boarder to postpone or effectively suspend the constitution again.

The fight between the “old traditional Thai power base” and the “modern Thai power base” led by Thaksim. Some of the expatriates I met seem to think that Thailand is getting into a situation or a case of “Thailand having an Army that owns the country”; something similar to Pakistan. The Army seems to have a great say in the lives of the Thai people and the politicians.

Thailand still remains a polite and friendly place to visit, however it seems to have shot itself in the foot regarding the tremendous progress it had made in the economic and democratic frontiers. As I come from a country that has seen decades of civil war I hope that sanity will prevail and the Thai people can sort out their differences and get ahead.

Authors Are People, Too!

Oh, bloggy friends, I have missed you! This year is kicking my behind! I had high hopes that I’d still be blogging with great regularity this year, but alas…between my 28 awesome fourth graders, the start of my PhD, and my incredible two-year-old daughter, time is an oh-so-precious commodity. By the time my little one makes it to bed at night, I. am. wiped. out. And then I usually have textbooks to read and papers to write. But not today.

Today, I wanted to share with you the very awesome author visit we had at my school.

Granted, it’s old news by now. It happened during the Decatur Book Festival on Labor Day weekend, which, by the way, is one of the coolest things you can do in the Atlanta area if you’re ever here for Labor Day. But my experience was cool enough that I still wanted to share…four weeks later…

Every year as part of the book festival, 1 or 2 children’s authors come and talk at our school. This year, the fourth graders got to listen to Chris Grabenstein. If you’re not familiar with him, you should seriously run, not walk, but run to get his new book, Escape from Mr. Lemoncello’s Library.

This book is the story of Kyle Keeley, an avid game-player who wins a contest to spend the night in the new library built by master game-maker Luigi Lemoncello. As Kyle explores the library, however, he realizes that winning the contest was just the beginning, and a whole new game with high stakes, twists, and turns is starting. It reminds me a little of Willy Wonka and the Chocolate Factory, and Roald Dahl is just one of many authors referenced in the book. It’s very clever, fast-paced, and entertaining. I started it as a read-aloud when we found out that Mr. Grabenstein was coming, and we seriously couldn’t put it down. It was one of those books where I’ve had multiple students go out and buy it on their own because they couldn’t handle waiting for us to read it in class. It’s way up there on my recommendation list.

Mr. Grabenstein definitely inspired the students as writers. He shared a lot about his writing process, but his overall message was to just let it flow without editing yourself. To illustrate that, he modeled writing a story for the students. Prior to starting, he gathered 5-6 random words that students had written on sticky notes. He stuck those in his back pocket. Then, he projected a crazy picture.

He explained the difference between a protagonist and an antagonist, and he encouraged students to “Ask yourself, ‘what if…?'” He said that there are always a few questions you need to think about when planning a story.
  • Who is this guy?
  • What does he want?
  • Where is he?
  • Who wants to stop him?
  • Why?
He then took student suggestions to answer those questions and plan his story.
Next, he had students come up with a starting sentence: “My face hurts,” and an ending sentence: “He ate radioactive iridium isotopes” so we would know when his story was starting and ending. And then he just started telling the story. It was hilarious! At various points throughout the story, he would pretend to be stuck and pull a word out of his back pocket, and no matter what it was, he just rolled with it. He has a background in improv comedy, so I suspect that helps. Still, it really hit home the message that you shouldn’t censor yourself while you’re drafting — you can always go back and change things later if you need to. When you’re drafting, you should just let it flow to wherever creative place you’re led. 
 We were pretty inspired by his presentation, and we went back to the classroom to a) write, and b) read more of his book. The kids were so excited! We were totally unprepared, however, when he came into our classroom about an hour later. (So unprepared, in fact, that some of my students were still working on their vocabulary tests on Spelling City!) 

Usually when authors have come to our school, they’ve given their presentations, signed a few books, and then split. Mr. Grabenstein went above and beyond, happy to spend his day engaging with the kids and taking an interest in what they were doing. They barraged him with questions, and he answered openly and honestly, encouraging the kids the whole time. Needless to say, Mr. Grabenstein has secured quite a fan base in Eberopolis.

In the weeks since his visit, we’ve had countless conversations in writing about some of the little tidbits Mr. Grabenstein shared with us, but more than anything, I loved that my students got a chance to see that authors are real people, too. They have good ideas and bad, writer’s block and inner editors just like the rest of us. But they power through those hurdles, and we get some fantastic books as a result.

Thank you for visiting us, Mr. Grabenstein. It was definitely a highlight in our year.

What is the Best Way to Warm-Up?

There is a lot of controversy and conflicting opinions on what you should do for a warm-up for exercise.   One of the reasons is that warm-ups should vary based on the activity you are preparing for and your level of fitness.
As the name implies one of the key goals in warm-up is to literally raise the body temperature and gradually ramp up the cardiovascular system to be prepared for harder efforts.     The length of warm-up should be based on the intensity of the activity.     Low intensity activities like moderate pace walking really require no specific warm-up as you can simply ease into the activity itself as a warm-up.     For activities like competitive athletic events that involve high intensity effort the warm-up should be longer.
In the same way, you have to consider your fitness level because a warm-up for a highly fit individual may be relatively high intensity exercise for a deconditioned person.
For all warm-ups, a 1 – 5-minute period of escalating cardiovascular exercise that raises heart rate and body temperature is advisable.    For high intensity athletic events this should be extended until the athlete breaks a sweat without being fatigued.   
This literal warm-up can be done on a cardiovascular exercise machine or via dynamic bodyweight exercises like squats, lunges, planks, push-ups, etc.    
Once you raise body temperature you can include some dynamic stretching with an emphasis on movements that address key joints and muscles involved in the actual activity you are warming up for.   For example, for tennis warming up the shoulder joint and surrounding muscles is important while for cycling this is less relevant.
 A Proven Warm-up Protocol
Warm-ups for sports participation have been researched and there is one in particular protocol that is proven to reduce injuries by improving muscle strength, balance, and coordination.    This protocol is called the FIFA 11+ Program and involves doing 15 exercises.    For a complete how to guide click here:  https://www.slideshare.net/PedMenCoach/fifa-11-warmup-to-prevent-injuries 

Although this protocol was developed for soccer it can easily be modified to fit just about any competitive sport!

‘Setting Of The Month’: Bandicam’s Xvid Implementation (with Screenshots and Quality Analysis)

As the First Post of a new type of article here at The Game Tips And More Blog
[started due to popular demand!], I would like to explain a bit about my ‘Setting Of The Month’:
What is meant by “Of The Month” (at least at this blog), is less ‘lunar syzygy’ and more ‘what is currently being served’, in concept. Every once in a while I will post what Recording Settings or Rendering Settings I am currently using. I want to begin doing these posts in response to two things:

  • It was requested by you readers! Over the first half of the year, I run a Poll here at the Blog (it is located on the top right panel area) and currently, the single most popular Requested Topic For Future Posts is “Tips and Tricks of Video Capturing and Editing”. Therefore, as part of answering that call ‘by popular demand’, by my respected readers, I want to share as a ‘Tip’ what settings I have been using of late to capture – not to tell you ‘what to use’, but to simply give everyone a suggestion – perhaps even a place to start from, when recording or editing their gameplay adventures.
  • I see ‘settings’ asked about a lot, everywhere. Whether it is in game forums, technical forums, video editing and recording application forums, or even in my Inbox once in a while, people are constantly asking what settings to use, or “what settings do you use” – and that’s great! I’m glad to see helpful replies of others (and sometimes short explanations on how someone is using a specific setting and why). As anyone who has asked me directly knows, I enjoy helping others with suggestions on settings and usually try to explain why I am using one setting over another.
And so, here is the first edition of a new addition to this blog, without further adieu:

 

This Month’s Featured Setting

Bandicam’s Xvid Codec

For the past little while, I have been messing with the Xvid codec – not the ‘official’ one from XviD.org that you have to download – the one that is built-in to Bandicam, easily available via pull-down menu in the Format area, where you choose which codec you want to record with. As of the most recent version of Bandicam [at the time of this post], Xvid is now the Default Codec that is pre-selected, when you install/startup Bandicam. Where in previous versions, a ‘Bandisoft-optimized’ MPEG-1 codec was the Default, now a ‘Bandisoft-optimized’ version of Xvid is thrust into the limelight – and I wanted to test this puppy out and see what tricks it can do!

If you’ve were computing through the 1990’s, you may have heard about the Xvid codec. A competitor to the DivX codec around the turn of the millennium, I am actually going to skip over the history of the Xvid codec [other than this one paragraph]. Parts of such history may actually be a ‘dark affair’ (depending on who you talk to), worthy of it’s own short documentary, as the DivX vs XviD history has some aspects in common to the history of other products and companies that were popular over time [with Saturday Night Television Specials such as “Apple vs Microsoft”, “Xerox vs Apple” and more..]. As with many companies and products in popular use today, they all have “Origin Stories” that you won’t find on The Internet and never will… And Now, Back To Your Regularly Scheduled Program

The Xvid codec is a version of MPEG-4 (it is MPEG-4 Part 2 or “H.263/ASP”), so it is directly related to it’s younger-but-bigger brother, AVC (which is MPEG-4 Part 10 or “H.264/AVC”). As such, Xvid [ASP] does not have many of the functions that are found in H.264 [AVC], such as Deblocking, where the codec will try to ‘hide’ some compression artifacts that occur due to over-compression; but Xvid is still a great codec to record with, it’s main strength being speed. Because it doesn’t have many of the processing functions of it’s more recent and bulkier MPEG-4 versions, it can ‘figure out a frame and save it to a file’ very quickly – which is essentially what is happening, technically, when game recording.

Recording with Bandicam’s Default settings for their implementation of Xvid [designated herein as “Xvid(b)”**, to show that it is the “Bandicam-Optimized Version of Xvid”] will give you a Quality Setting of 80%. The capturing framerate, by Default, is set at 30 fps (Frames-Per-Second). The audio format, in this Default setting, is compressed “MPEG-1 Layer 2” format (MP2) for the Audio. Here is a screenshot showing what all of Bandicam’s Default settings, for their implementation of Xvid, looks like in one image:

The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Default Settings)
Click to see Full Size

Below, are a sampling of a handful of games and the framerate performance hits that were seen while recording with these Default Xvid(b) settings (i.e. the differences between ‘playing the game and not recording’ versus ‘playing the game and recording at the same time’):
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

Recorded Game Title                     Resolution      Performance Hit (Δ)
Hitman: Absolution Benchmark 1366×768 ~ 2 fps
Hitman: Absolution Benchmark 2560×1440 ~ 4 fps
FurMark (Full Run) 1366×768 ~ 2 fps
FurMark (Full Run) 2560×1440 ~ 0 fps
Unigine Valley Benchmark 1366×768 ~ 6 fps
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 4 fps
Batman: Arkham City Benchmark 2560×1440 ~ 9 fps
Skyrim (Introduction) 1366×768 ~ 0-8 fps
Skyrim (Introduction) 2560×1440
Minecraft 1366×768 ~ 0 fps
Minecraft 2560×1440 ~ 0 fps

table code created by Danny Sanchez (journalistopia.com)

As you can see in the table above, the difference in framerate between ‘Playing’ and ‘Playing While Recording’ is very minimal [the performance ‘drain’ being accentuated in higher resolutions for most games]. Although only a handful of games were tested, I did try testing both spectra of resolutions possibly in use by the average gamer today, by recording with an ‘enthusiast’ resolution (2K/1440p) as well as a commonly-run laptop/notebook resolution (1366×768) which could also be run by older or less-capable systems. Bandicam’s optimized Xvid performs very well in the tests, with almost as low of a performance change as the ‘super-light-performance-hitting’ MJPEG codec.

Like MJPEG however, Xvid’s weakness is the lack of tools to compensate for compression. Again, I mention here the MPEG-4/AVC ability to somewhat ‘hide’ compression artifacts, with code for utilities such as “Deblocking” built into the codec, where the edges of areas that the codec is making its calculations in are ‘softened’, so that the ‘blocky’ effect of high compression (called Macroblocking) is less visible. In Xvid, there is no such utility, so if too high a compression level is attempted [too low a bitrate is stipulated], then these ‘block’ artifacts can easily be seen, especially in ‘flatter’ areas of a frame (portions of the screen with less color and/or changes happening), as seen in the below frames, extractions from the actual recorded video frames themselves:

[In the examples below, when the compression artifacts aren’t as obvious, I will show the entire screenshot in compressed JPG format, then underneath I ‘zoom in’ to show the compression artifacts from the codec as magnified extractions from the original video frames, in BMP (BitMaP) format. I use sampled areas for that, as full 1440p Screenshots in an uncompressed format would be over 10MB each]

Xvid(b)** at 90% Quality [altered from Default 80% Quality Setting], Battlefield 3.
Click to see Full Size
The result when recording at 90% Quality (up from the Default of 80%) was very satisfactory, with only ‘nit-pickable’ parts to show the codec’s weaknesses, like the Upper Left area of this scene above (with the dark interior areas). Some artifacting can also be seen in the Middle Top area (slightly obvious even in this compressed JPG), where the plain sky areas take the brunt of the compression of this frame taken from the original game recording video produced by Bandicam.

Xvid(b)** at Bandicam’s Default of 80% Quality, Battlefield 3.
Click to see Full Size
The above image is taken from a game recording of Battlefield 3 that had some pistol action going on, with an explosion caught in the background. The quality of Bandicam’s Default setting isn’t too bad and high action scenes can actually look quite acceptable. For example, in this frame above, with the explosion occurring on an upper walkway, only the Right Edge of the explosion (with the debris) has obvious Macroblocking – and the sidewalk [and foliage] macroblocks had to be ‘looked for’ here – and are less noticeable in the moving video. The ‘flatter area’ (with less colour variations) in this scene, is the poster advertisement, which the codec punishes with compression, leaving colour banding and macroblocks evident. The rest of scene is more complicated material and demands the codec to utilize more bitrate, ending up looking not too bad at all, when VBR is used (Variable BitRate, “changing data rate”) mode).

[I personally found that in dark (as in nighttime) scenes, at 80% Quality there was distracting colour quantization (colour quality loss) and macroblocks (little square compression artifacts); but for most material, the 80% Quality setting seems ok to use for Xvid(b)**, most of the time]

Xvid(b)** at Bandicam’s Default setting for Xvid of 80% Quality, the Batman: Arkham City Benchmark.
Click to see Full Size
The above image is an extracted frame from a recording of the Batman: Arkham City Benchmark. A very difficult scene for any codec (unless you tell it to ‘keep all quality, use 100%’ and then don’t mind the larger file size that will be created) it is hard for a codec to decide what to compress and what not to, as particles fly all over the place and light and dark areas shift around as the Benchmark runs through this area with changing levels/regions of Luma [lightness, brightness]. Bandicam’s Xvid did a good job trying to keep the text sharp at 1440p – but at 80% Quality, macroblocks are everywhere (those present in the screenshot above are not from the JPG compression, they were present in the game recording itself). At 80% Quality, anything with subtle gradient colour changes are absolutely tortured by the codec, seen especially in the change from light to dark in the Center Top light fixture area and the Left Lower curtain region. Bright areas however, such as the light fixtures themselves and almost all of the particles flying around, are judged by the codec to be ‘important to human eyes’ and detail is kept high for those objects.

Xvid(b)** at Bandicam’s Default setting of 80% Quality, Minecraft.
Click to see Full Size
The above frame is taken from a recording of the Minecraft Demo starting shoreline, originally captured at 1440p (the image is resized down to 1280×720). I was interested in how Xvid would handle Minecraft, a difficult game to capture and compress, as hard edges and lines are everywhere. Bandicam’s version of Xvid did surprisingly well, as the video recording itself is a joy to watch, with compression artifacts barely noticeable (recording at higher resolutions helps with that, but uses more disk space for the game recordings). Magnification of the original video frame is just below (next image):

These two sampled regions are magnified to 200% (doubled in size). They were extracted from the game recording frame above, which itself came from the original game recording produced by Bandicam and the built-in Xvid codec.
Click to see Full Size
While not as obvious in the moving video, the above frame extractions (both Left and Right sides) show Gibbs Effects [‘ringing’ or ‘mosquito noise’] around the hard edges of Minecraft’s graphics. The colour gradient changes, blending slowly into the background/sky colour in the Right Half of the above image also cause Ringing and Macroblocks to occur. Distant water gets treated with extreme prejudice by the codec, as the jumble of lines and animation from the textures are ‘sluffed together’ [my technical term] and Macroblocks are obvious. Again, these artifacts are more obvious in the stills from the game recording – the video itself, when watched, was more appealing to the eye and these compression artifacts aren’t as noticed as the frames fly by and the cow looks at you in a wondering manner.

Regardless of some of Xvid’s compression shortcomings illustrated above, with the speed that it performs at, along with the ability to turn up the Quality setting in Bandicam, these artifacts shown will not occur as often in higher quality settings – and then Xvid can be a nice codec to run with, especially if a system cannot handle a codec that does higher processing on the frames [taking more time to do calculations on them and saving them to a file, creating ‘lag’]. Older systems or laptops that do not have the hardware to utilize GPU-accelerated game recording (with codecs such as NVIDIA’s CUDA and NVENC, AMD’s App Acceleration and Intel’s Quick Sync) can utilize Xvid as a less-taxing codec to record with [as another option on the Utility Belt of Game Recording Codecs to choose from]. Indeed, it is almost as speed efficient as the ever-compatible MJPEG codec, for capturing, editing and compression.

The default setting, when installing Bandicam, creates a GOP of 150 [GOP stands for Group Of Pictures or the number of frames between Information/Key Frames in a video]. This is fine for normal viewing (and it leaves a lot of headroom for compressing ‘only the differences’ between the frames, resulting in smaller filesizes), but a large GOP can create problems with editing, as many NLE’s (Non-Linear Editors, such as Sony’s Vegas/MovieStudio line, Adobe’s Premiere products, Lightworks and more) do not work well with so many frames in-between the Keyframes – however, editors such as Corel’s VideoStudio, CyberLink’s PowerDirector and Microsoft’s own Movie Maker do not exhibit this issue [I tested these three applications by hand, myself, just to make sure and they imported fine and were handled without the “glitchy-ness” or “trails” that were exhibited in (for example) Vegas].

Although originally captured for an article on the Xvid codec here (which can potentially also experience the issue mentioned in the above paragraph) this image shows an example of what the “trails” or “glitchy-ness” will look like, as it was captured from a video with a Large GOP (large keyframe interval) output produced by Vegas. (Click to see Full Size)

When editing a video with a large GOP, the video editing application must ‘seek’ to the next Keyframe whenever it has to process a request and calculate/build all of the frames from there (which slows things down and delays processing and editing). Also, depending on the application, with some programs video can only be ‘cut’ on keyframes (unless an application is coded to create keyframes where needed). All of these steps and problems created by ‘Long-GOP’ video can be avoided [when using the above-mentioned video editing programs] by simply adjusting the Keyframe Interval in the Xvid settings to “1”.

One caveat to keep in mind, with setting a Keyframe Interval of “1”: although it will now make for speedy/easier/morecompatible editing with many video editing applications, the codec will not have as much ‘headroom’ to work with, when compressing your game recording material. 
What this means is, that instead of only keeping track of the changes between frames (say, a person running by down the side of the screen), where the codec will literally only save those ‘differences’ in the file; it now has to save every single portion of the viewable screen in every single frame, complete and independent in ‘stand-alone’ frames (the KeyFrames), and while the video will be much faster in seeking and have increased editing compatibility, the codec requires much more bitrate now, to save ‘everything’ in every single frame.
The result: your video file size will end up larger than before. However, you can now edit the video in Vegas, Premiere, Lightworks and more… the choice of how to go about this aspect then, is up to you [whether to use a GOP of 1 for easier editing, or not]. If you do not use these specific video editing programs (perhaps instead, you are using PowerDirector or VideoStudio Pro or Movie Maker, which to not have as much trouble with ‘Long-GOP’ material, not needing the GOP to be one frame) or you are not having problems with whatever editor you are currently using, there is no need to make this change to the Xvid recording settings in Bandicam [this is why there is no green indicator arrow in my ‘Suggested Settings’ illustration coming up in a little while, for this option]
Staying on the topic of Bitrate [from the above paragraph] for a moment, “..what kind of file sizes are we looking at..?”, you might ask. Well, here is a sampling of some of the Bitrates that were seen when recording with Xvid(b)** at Bandicam’s Default Settings for the codec:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }
Recorded Game Title                    Resolution     BitRate (Mbps, GBph) 
Hitman: Absolution Benchmark 1366×768 ~ 34 Mbps, 0.97GB/hour
Hitman: Absolution Benchmark 2560×1440 ~ 83 Mbps, 2.4GB/hour
FurMark (Full Run) 1366×768 ~ 44 Mbps, 1.2GB/hour
FurMark (Full Run) 2560×1440 ~ 45 Mbps, 1.2GB/hour
Unigine Valley Benchmark 1366×768 ~ 37 Mbps, 1.06GB/hour
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 20 Mbps, 0.57GB/hour
Batman: Arkham City Benchmark 2560×1440 ~ 54 Mbps, 1.5GB/hour
table code created by Danny Sanchez (journalistopia.com)
Just to compare some file sizes of other codecs: the Low Quality setting for the Dxtory codec (with Compression) recorded a run of the Unigine Valley Benchmark (at 1080p) at about 326Mbps (9.3GB/hour), while FRAPS produced a recording of about 291Mbps (8.3GB/hour), with Lagarith (in Default/RGB Mode) creating a recording of the same material that ran at about 235Mbps (6.7GB/hour). Of course, bitrates fluctuate, depending on the complexity of the material (more movement/action/etc, which requires more bitrate to properly represent the material.. but a longer explanation of that is outside the scope of this post [believe it or not…I’m trying to keep them ‘short’! hah]).
The other setting that can be changed in the Bandicam interface for their version of the Xvid codec, is the Quality. Here is an example of the differences in quality output at the various Quality settings for Bandicam’s Xvid:
Comparison between varying Quality settings, for Bandicam’s version of Xvid (from Left to Right; Quality at 40%, 60%, 80% and 100% Quality). The JPG compression used for this composite [the four videos side-by-side] did not overly affect the Macroblocking occurring – the ‘blockyness’ seen in these frames is almost untouched, even though the videos from the original Unigine Valley Benchmark recordings were converted into this JPEG image – this is very close to how it looked in the video (although slightly more noticeable as still images). Click to see Full Size
As you can see, the perceived quality for Xvid goes down quickly, with Macroblocks becoming more obvious as the quality setting goes down. However, acceptable Quality can be maintained if the quality setting is kept high [in my opinion, stay at 90% or higher if you can]. Remember though, that with the higher quality settings, more space will be required by the codec, to save all of that data. Also, if using a Keyframe Interval of “1” (creating a GOP size of one frame, each frame in the video then being a Keyframe), the codec will also not have as much room to compress the images/video and your output size will increase. As stated above though, the benefit of using a Keyframe Interval of “1” is, then your game recordings will be easily importable/editable in NLEs like Premiere, Vegas, Lightworks, etc – if you are are having troubles with those specific applications [if you are not, there is no need to limit the GOP to one frame, which is why there is no green arrow indicator in the below illustration]. Below, are my Suggested Settings then, for this codec in Bandicam, in one image:
The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Suggested Settings):
Quality is at 90%, PCM (“Uncompressed”) Audio is selected [mainly for editing compatibility], a higher compression (“Smaller file Size” option) is chosen (and a Keyframe interval of “1” is suggested for compatibility with editing applications such as Vegas, Premiere, Lightworks, etc. if required [only change if needed as it increases file size, no green arrow indicator is shown on the Keyframe Interval])
Click to see Full Size

Overall, I think ‘Bandisoft’s version of Xvid’ in Bandicam does a decent job with Quality – and is downright excellent where Performance is concerned. On my system (and hopefully yours), Bandicam’s Xvid had very little drain on the performance of the game while recording with it, creating very little ‘lag’ while recording (it had a low ‘performance hit’). As long as the quality setting is kept high (90-100%), the recorded output Quality can be quite acceptable, with only a little Macroblocking (block shapes being visible) and Posterization [colour quantization, which is a reduction in the amount of colours, resulting in ‘colour banding’ or ‘bands’ seen] in the darker and ‘flatter’ areas of a frame in a game recording (Macroblocking may occur in areas such as skies, less-colourful regions, etc). Try out some recordings with Bandicam’s version of Xvid for yourself and see if you prefer using it for recording your gaming adventures.
Please note dear reader, that I am not saying “this codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – use what you prefer. 



See you in the games!


Personal Short Version/Opinion:


While the Bandisoft-optimized version of Xvid included in Bandicam works pretty well and is fast, I find myself not using it very often, other than this past month or so, for testing. After recording for a while with Xvid’s ‘successor’, h.264/AVC, the extra features of Deblocking and other tools in AVC have ‘spoiled’ me. Going back to the slightly more ‘blocky’ output of Xvid – even though it creates very little lag when recording – is slightly distracting to my eyes. When I see an Xvid game capture of mine now, my eyes are instantly drawn to the darker/flatter areas of the scene and those little tiny block shapes…and I sigh at the slowly-aging Xvid codec, remembering its’ heyday’ of compressing my TV shows recorded on my ATi TV Wonder PCI card. The late 1990’s and the 2000’s were ‘Xvid’s Time’ to me, when I used it for almost everything – and while it performs well in game recording today (even Xvid.org’s ‘Official’ version, with the right settings), I am now just too used to the benefits of more modern codecs, like h.264/AVC, which can even use the videocard/hardware, for GPU-accelerated recording.

I realize there are a lot of people gaming on laptops out there, and not everyone has a dedicated/separate videocard inside their system to record with, but the more I use my GPU to record with, the more I am impressed with the performance when recording most games [note that some games ‘don’t like’ GPU-accelerated recording (are not fully coded for compatibility with it) and these games have large hits to performance with it]. At the moment of this writing, I have two NVIDIA videocards running in my system (performing together in SLI mode) and I am enjoying using the GPU-accelerated CUDA offering in Bandicam to record with. Like AMD’s AppAcceleration and INTEL’s QuickSync, CUDA utilizes H.264/AVC through the hardware to record, having high performance [for most games] and producing nice output, utilizing some of the newer aspects of MPEG-4 (such as Deblocking) when recording, to hide compression artifacts [the little ‘glitches’ from compressing the video]. The speed, and presence of light ‘compression correction’ from this hardware implementation of MPEG4 has spoiled me now, and I am finding it hard to go back to the slightly more obvious artifacting in ‘older’ codecs, such as MPEG-1 or Xvid (which is ‘older’ MPEG-4), especially when those codecs are used at lower quality settings, to try and save hard drive space. (Turning up the Quality settings for these codecs helps a lot, if your system can handle it)

As CPU architecture evolves and modern CPUs have ‘mini-GPUs’ built into them, the differentiation of capability between ‘gaming rigs’ and ‘gaming laptops’ blurs [as far as game recording goes], as GPU-accelerated game recording is possible now by less and less expensive hardware (AMD APUs) and processors (INTEL’s QuickSync), even within laptops [as opposed to full desktop systems]. This means that “gaming laptops” now have much more capability when it comes to game recording, today. If your laptop is capable of using GPU-accelerated recording, give it a try. If it is not, systems that do not use the GPU to compress their video can still perform well recording games, as is shown with the above article, by using Xvid. “If you can’t choose the H.264 encoder in Bandicam, choose ‘Xvid'” ~ Quote from the Bandicam.com website.

Do some testing of your own dear reader – and have fun experimenting, finding a codec that you will eventually prefer to record with – and See You In The Games…
Last Remarks (in addition/continuation to the Prologue of this article): 
Another thing to keep in mind is, that my settings (both for Recording and Editing/Rendering) change slightly over time… I may have been able to purchase a new disk drive recently for instance, so then I will allow my recordings to take up more space [for a while anyway]. I may be trying out a Demo/Trial of a new version of a Video Editing Application, so I have been experimenting with some different Rendering settings. Perhaps a videocard driver or codec was updated, so now I will experiment a bit with the recording application settings, seeing if I can squeeze a little more Quality out of my recordings, while keeping the Performance high. All of these reasons and a few more, are why my settings constantly change over time. Don’t worry, I’ll try to remember to come here and share them with you, anytime I find a “Good Combination” that works well for either High Quality or Fast Performance, the ‘Holy Grail’ of course being a Perfect balance of both. 
As I have begun more dedicated testing over the past few years, I have found that specific games themselves ‘prefer’ certain recording and rendering settings over others. What I mean by “prefer” is: as new game rendering engines are written, hardware architectures change, and programmers utilize ‘something over another’ in general during a game’s development, this affects what settings a game ‘works better with’, whether it is a specific game recording program, hardware/GPU, or specific recording and rendering settings; hence my usage of the word “prefer”. 
This is why, for example, some games will perform better on an AMD/ATi-based videocard in Benchmarks and Reviews than an NVIDIA-based GPU – and then other games will have better results on an NVIDIA-based videocard over an AMD/ATi-based GPU – those games were simply being developed [the programmers wrote the code] on a system with that certain GPU installed in it at the time. This also means there is a chance of specific optimizations in programming that slightly favour one brand of GPU over another [and they may even have been ‘compensated for their efforts’ by that respective company, but *shhh* these things aren’t spoken of outside Mordor]. 
In regards to the above and game recording, I have found that some games will have better performance with different game recording applications as well. For example, one game may have less of a performance hit while recording with Dxtory and then another game will have better performance recording with Bandicam [as an example] – it all depends on the code and how it is written and being rendered. That’s why I ‘change it up’ so often, altering my recording settings (and rendering settings) as each game I play exposes its nuances. That’s what I mean if I ever say a game ‘seems to prefer’ recording with one game recording program over another. 
Keep this all of the above in mind then and also remember dear reader, that I am never telling you “you should use this”, I am always suggesting only a possibility in my posts, and it is always up to you to try it out and decide if you want to use a recommendation of mine or not.
 [I encourage everyone to always take the good ideas from others and leave the bad, making up a composite of their own liking and preferences and what they want to utilize – whether it is with game recording and editing, or Life In General – but, that last part is for another blog…] 

 **[designated as “Xvid(b)”, to show that it is the “Bandicam-Optimized Version of Xvid”]

My Trip to New Delhi & Hyderabad Cont…….

Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

No Backtracking

No Backtracking principles

This is a plan for life. You will carefully reintroduce certain carbohydrates into your diet — and find the balance that maintains your weight and keeps you feeling trim. This crucial phase will allow you to:

  • Establish the carbohydrate levels that you can eat in order to remain slim and supply your energy requirements
  • Break totally with bad habits made in the past
  • Never return to yo-yo dieting
  • Find a healthy attitude to food and a viable eating plan for the rest of your life.

No Backtracking rules

During this phase you need to:

  • Increase your daily carb intake by no more than 10g (1/3oz) each week
  • Add new foods one at a time
  • Eliminate a new food if it provokes weight gain; a return of physical symptoms lost during the Fast-Track Plan; increased appetite, cravings or water retention

Diet Start

  • Drop back to the next-lowest level of carbohydrate intake if you gain weight
  • Carry on eating adequate amounts of healthy fats and lean protein at every meal to ensure a balanced diet
  • Continue to take vitamin and mineral supplements regularly, drink masses of water and, of course, exercise regularly.

Make this diet the one that works

Once you have reached your target weight, you can start on the No Backtracking plan. Increase your intake of carbohydrates by 5-10 grams per day until you reach your optimum level for weight management This will probably be around 40 per cent of your total daily calorific intake, but remember that everybody differs, especially when you consider activity levels.

If you have high insulin resistance, then you may have to Keep on Tracking and be careful about how many carbohydrates you consume on a daily basis. But if you’re one of the lucky ones with low insulin resistance, you may be able to eat most vegetables (including starchy vegetables), fruit, pulses andwholegrains such as oats, barley, millet, wild rice, couscous and buckwheat. You can also begin to use recipes containing carbohydrate ingredients such as breadcrumbs; you may even be able to handle an occasional potato. But don’t eat all these things in one day. You still have to monitor your carbohydrate intake to stay where you are – healthy and energized. Remember the eating habits that got you here in the first place. You should have successfully gauged your ideal carbohydrate level, and be maintaining a stable weight and energy levels, within 4-12 weeks of following the No Backtracking plan.

Stick to the basic weight management tips and try to be good 80 per cent of the time. We are all allowed the odd slip up – if you want a slab of chocolate cake from time to time, make sure it is the best you find and enjoy it. If you ever see the scales creeping up, cut back, even go back to the Fast Track plan for a few days until your weight is back to normal, and then gradually raise your carbohydrate levels once again.

A template for life

Two portions of higher GI carbohydrates are included per day on the suggested eating plan. Treat this as the template you ought to follow from now on. And try some of these tricks to keep your carbohydrates at a moderate, healthy level:

  • Opt for rye bread, oatcakes and rye crackers instead of wheat-based bread. Even if you are not wheat-intolerant, it is worth considering this.
  • Eat fruit 20 minutes before eating anything else, not afterwards. Fruit takes less time to digest, but if eaten on top of a heavy meal, can cause bloating.
  • If you are going to drink alcohol, choose dry white wine or, even better, red, which contains flavonoids with antioxidant and anti-platelet properties thought to reduce deaths from coronary artery disease. If you have managed to kick the alcohol habit, opt for grape juice, which contains flavonoids similar to those in red wine.
  • Mix sweet potato with cauliflower as a mash or purée to go with roast chicken. The aim is to mix a high GI vegetable with a low one, to reduce the total carbohydrate level.
  • When making a rice dish such as risotto, reverse your ratio of vegetables to rice: add a little rice to a heap of vegetables. And try grating raw vegetables such as carrots and courgettes into the dish at the last moment – it adds texture and you get the benefit of all those raw phytonutrients.
  • Don’t give up on those whey-protein smoothies – they are still the most effective way of getting high-value biological protein.

The Incredible Pistol Squat

The pistol squat requires mobility and strength from the entire lower body and core, and once you work up to being able to complete them you can get a great lower body workout anywhere with no equipment. 
Most people will not be able to perform the pistol squat properly without working through several progressions that help develop the specific mobility, strength and stability required to get through the exercise for repetitions.
Pistol Squat Progressions
There are two basic ways to progress to a full pistol squat. Either use a progressively lower bench or step, or use something to hold onto while doing a full pistol to help pull yourself up and progressively use it less and less until it is no longer required.
For the step progression, you can use actually stairs or use a chair to start.    Stand facing away from the chair or staircase and put all your weight on one leg keeping the other leg straight with the hip flexed slightly so the non-standing foot is held off the ground in front of you.     Flex the hips and reach back with your butt towards the staircase or chair and lower yourself down under control keep your arms straight and in front of you parallel to the floor to counterbalance your hips moving backwards.    Let the standing knee and ankle flex along with your hip as you reach your butt backwards and go down.    However, you MUST keep the heel of the standing leg down and this requires a lot of flexibility of the soleus tendon (soleus is the single joint calf muscle).    
Try to lightly touch your butt down to a stair or the chair then drive the standing foot down, squeeze the glute extending your hip, knee and ankle to the starting position.  Perform sets of 5 – 10 reps each leg.    Overtime find progressively lower steps, benches or individual stairs so that you are progressively squatting lower and lower until you can perform a full squat on one leg all the way down to the ground and back up again keeping your non-standing leg straight and parallel to the floor while the hip is flexed.
The second option to progress to full pistol squats is to hold onto something that you can pull on while doing a full pistol squat thereby assisting the stance leg.    You can hold onto a suspension trainer, a cable machine handle, door frame, chair or table, or resistance training band or rope anchored above you.    A great way to do this is to anchor a suspension trainer or resistance band above you to a secure point then grasp the two handles and pull on them as required to do a full pistol squat.    Over time progressively use less and less assistance from the upper body, switch to just one hand, then lessen grip and assistance until you can perform full pistol squats.

Videos:  https://youtu.be/It3yvU0fomI or https://www.youtube.com/watch?v=PPksQCbeVZw

Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

[Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

And More: A Simple Explanation Why ‘Loot Boxes’ May Be Considered “Gambling”, In Games Like Star Wars Battlefront II, Et Al… [Editorial]

((Portions of this article
may or may not have
information obtained
from this unidentified
Imperial Officer))

Recently, in the game Star Wars: Battlefront 2 (EA, Dice), there was the introduction of “Loot Boxes”. These are purchasable ‘crates’ that can contain multiple items. These items are generated randomly (RNG, Random Number Generation) and are obtainable by using “RealLife™” Money [my superscript as pun] – and therein lies the problem being discussed.

In an attempt to explain it simply on a Steam Forum Thread a few days ago, I posted the comment below. I replicate it here, to share with others, so that this whole ‘issue’ may be understood more fully:

“If I may pop in, to explain the reason why “loot boxes could be considered gambling”; it is due to a few factors:

– There is an RNG factor in the potential items from the Loot Boxes (the items are random, and some items are worth more than others)

– The inclusion of the possibility of utilizing RealLife™ Currency to obtain them.
[Because of this element, more than anything, it could possibly be construed as “gambling”…]

– Because the items (1) can be exchanged in the game for other items that ‘cost RealLife™ Money (2), they are ‘gambling on the possibility’ that they will ‘save money’ if there are better/higher items in the Box purchased (i.e. they will ‘save money’ if the RNG produces higher/better items in the Box; they will not have to buy much more)

Together, all three points mean the game essentially has “gambling” within it…
I assume the reason why some parents are getting upset about it, is that there is a possibility of a Minor using their RealLife™ Money to obtain the Loot Boxes (in any game).

The solution is simple however; remove the possibility of utilizing RealLife™ money to obtain the Chests/Boxes/etc OR the possibility of getting ‘better items’ that will ‘deconstruct into elements that can accrue to get better items’ (“saving money” if the better items appear via RNG) and there is no longer the possibility of it being “gambling”, as it were.”


The above points, along with the fact that the ‘items’ can actually affect a players’ performance (i.e. a person with more items or better items can actually live longer or do more damage than someone without the items), is the sum of the whole problem that is upsetting many gamers, the entire issue becoming aflame in the recent release (Nov.17th) of “Star Wars: Battlefront II”.

Other games (eg. “Team Fortress 2”), handle this concern for the most part by making sure that the items contained in their ‘loot crates’ are only ‘cosmetic items’ (hats, skins, costumes, etc) that do not affect player performance against other human players. It remains to be seen whether the “RNG Factor” involved in such ‘Crates of Loot’ in these other games, like TF2, are going to still become a ‘gambling’ issue, or not.

Hopefully this helps you dear reader, in understanding the issue at hand and why some people are getting ‘up in arms’ about it at this time. 

~Troy from The Game Tips And More Blog

Solving the Weight Loss Puzzle Part 1

Have you tried to lose weight and failed? If so, you are not alone. 95% of the people who try to lose weight fail to reach their goal, and even less are actually able to maintain their weight loss once they achieve their goal. Obesity and the associated disease diabetes are increasing exponentially in the America despite the many published health warnings about the health risks associated with being overweight.
Why are people unable to lose weight? People are hopelessly confused about the factors controlling bodyweight regulation. This is not surprising when you understand that every single program, book, and guideline developed by various diet “experts”, including our own government, lacks crucial information, contains misinformation, or contains myths. The list of experts and programs seems endless: Dr. Atkins, Dr. Andrew Weil, The Pritikin Diet, Sugar Busters, Protein Power, Dr. Dean Ornish, the Paleo Diet, the Ketogenic Diet, and all the rest. To make matters worse much of the “information” from different experts seems to be completely contradictory.
Take this short True/False quiz to see how much you really understand about controlling your weight and bodyfat levels.
Eating a low fat diet is the key to losing weight
Eating a low carbohydrate diet is the key to losing weight
Most obese people have a slow metabolism
Obesity is a genetic disorder
Some people have a slow metabolism and some people have a fast metabolism
Exercise is not really effective for weight loss
You can eat all you want and lose weight if you do not eat carbohydrates
Low carbohydrate diets are unhealthy
If you eat foods in the right combinations you will lose weight
The key to weight loss is eating healthy not counting calories
Americans are eating more fat than ever before
Americans are eating less fat than ever before

Sound familiar? It should. All these statements have been made by various “experts”. Unfortunately, all but the last one is FALSE. If you want to control bodyweight you have to understand ALL the factors that govern bodyweight regulation and how they apply specifically to you. Stay tuned for part 2 of this article to learn more!

Ten Risk Factors That Cause Food Reactions (1-5)

The primary cause of most food reactions is incomplete digestion. At almost every meal, we eat foods that we don’t completely digest. The results are disastrous. When we eat foods we can’t digest, we almost always have some type of reaction.

Food that isn’t completely digested can enter our systems in large food macromolecules that cause a great deal of trouble. The body perceives these macromolecules of partly digested food as foreign invaders, similar to bacteria, viruses, or parasites. Then the body attacks them with the full force of the immune system.

This immune inflammatory attack creates the symptoms that you hate: fatigue, weakness, heartburn, aching joints and muscles, nasal stuffiness — and false fat.

There are several factors that most often cause incomplete digestion. To get started on the False Fat Diet, you’ve got to understand these factors and avoid them. In order of importance, here they are.

Risk Factor 1. We eat too narrow a range of foods.

It’s estimated that the average person gets about 75 per cent of his or her calories from just ten different foods. Most of us have our favourite foods, such as wheat and dairy products, and we rely on them far too much. When we overeat any one food, we exhaust our body’s ability to fully digest it.

Diet Start

Risk Factor 2. We eat too many fake foods.

We eat synthetic foods, such as fake fat and artificial sugar, that are manufactured in factories. No wonder we can’t digest this stuff! Furthermore, most of our packaged foods have been crammed with chemicals that human bodies cannot adequately metabolize. Often, a synthetic food has a long shelf life precisely because it can’t be broken down by nature.

Risk Factor 3. We have digestive enzyme deficiencies.

Many people are dangerously low in the enzymes that digest food. Even when these people eat healthy foods, they don’t have enough pancreatic enzymes to break the foods down properly.

Millions of people haven’t been genetically endowed with the right digestive enzymes to thrive on a modern, industrialized diet. For example, African Americans are ten times more likely than Caucasians to lack the enzyme that breaks down milk. Because a lack of enzymes is a common problem, the False Fat Diet generally includes supplementation with specific enzymes.

Another cause of enzyme insufficiency is our failure to ingest the natural enzymes that exist in foods. Many whole, unprocessed foods automatically come with the enzymes that are needed to help digest them, but before we eat these foods, we often kill the enzymes by cooking, processing, irradiation, and storage.

Because it’s important to eat foods with live enzymes still in them, patients on the False Fat Diet tend to eat a lot of fresh, whole, raw foods.

Another critically important digestive substance that millions of people lack is stomach acid, or hydrochloric acid. Unfortunately, production of this acid decreases as we age, which is why indigestion is more common among older people. Many people mistakenly think they have too much stomach acid, because they often get heartburn — but the opposite can be true. Heartburn can also be a sign of low acid. When you don’t have enough existing stomach acid from day to day, your stomach secretes too much when you eat to make up for the deficiency. Later on, I’ll tell you how to fix this deficiency.

Risk Factor 4. We eat food that is too refined.

Too much of our food is stripped of fibre and then shredded, pulverized, powdered — and finally stuck back together again with gluey fillers. By the time we eat it, it’s not much more than a predigested mush of starch and sugar. Unfortunately, this excessive processing often allows the food to rush into the bloodstream before it undergoes the complete digestive process. If this ‘predigested’ food still had its fibre, it would stay in the gut long enough to be fully digested, or it would be carried all the way through the system by the fibre and eliminated. Because of this factor, I urge people to avoid overly refined foods.

Risk Factor 5. We create our own intestinal problems.

One of the most common and harmful of these problems is a condition that allows undigested food macromolecules to slip through the intestinal wall. This condition is called ‘leaky gut syndrome,’ and doctors have only recently realized how hazardous it is. A leaky gut‘s wall is more permeable than it should be.

This permeability can be caused by eating chemical additives and also by drinking coffee or alcohol with meals. If you’ve noticed that you most frequently have food reactions when you have a cocktail with dinner or coffee with breakfast, you may have leaky gut syndrome.

Another primary cause of leaky gut syndrome is overgrowth of the natural yeast Candida albicans. Candida is usually present in the body and is mostly found in the mucous membranes — especially those in the intestines. It normally stays in balance with other healthy bacteria, but it can get out of control and increase gut wall permeability. It proliferates if you:

  • Take antibiotics, which kill all bacteria.
  • Take birth control pills.
  • Take steroid drugs.
  • Eat foods, such as sugar, that cause yeast to multiply.
  • Eat things that contain lots of yeast, such as bread and beer.
  • Have impaired immunity.

Candida is a major cause of bloating and often causes a ‘beer belly’ look. In fact, I think that many heavy beer drinkers with beer bellies aren’t nearly as far as they look, but are just swollen with candida, reactive gas, and fluids. I had one patient who lost his beer belly in a matter of days on the False Fat Diet. He was thrilled with his quick response, and it motivated him to stay with the diet.

Globesity

THE RISKS FROM OBESITY

Being overweight can induce:

¨ Diabetes (type 2: non-insulin‑dependent)

¨ Coronary heart disease and strokes.

It increases the risks of:

¨ Cancer of the colon, prostate, uterus, cervix, breasts and ovaries

¨ Gall-bladder disease

¨ Musculoskeletal disorders and respiratory problems.

We live in a world where half the population seems to be obsessed by dieting, while the other half is suffering from starvation and malnutrition. We have no control over the natural disasters that leave millions fighting to find enough food to survive, but why is it that so many people — not just in the Western world, but also in developing countries — are becoming overweight, leading to soaring levels of diabetes, cardiovascular disease and certain cancers?

We may have made huge advances in technology, but we seem to have lost our connection to nature, and nowhere is this better illustrated than in the food we eat. Our meat is sold in sterile packaging, and contains antibiotics, growth hormones and pesticide residue. We eat (well, some of us eat) fruit and vegetables that are sprayed, waxed, dyed and sometimes irradiated to make them look attractive. The grains that form the bulk of many people’s diets are stripped of their fibre and nutrient content. And the milk we drink is pasteurized.

Diet Start

Because there is so much choice, so little time and sometimes so little money, many people choose the convenient pre-packaged or fast-food option, rather than insisting on good-quality, naturally produced, locally available produce. They would rather sit and watch a cookery programme on television while eating a TV dinner or a take-out than get into the kitchen and cook a healthy meal for themselves.

According to the World Health Organization (WHO), in 1995 there were an estimated 200 million obese adults worldwide, and by 2000 that figure had increased to 300 million. But obesity is not just a problem restricted to adults -25 per cent of children and adolescents in the US are overweight. The problem is beginning to replace malnutrition and infectious diseases as the most significant contributor to ill health worldwide. Obesity is now recognized as a disease in its own right, but one that is largely preventable through changes in lifestyle – especially diet.

A lesson from dietary history

For years we have been fed the information that a low-fat/high-carbohydrate diet is the healthiest one for us. The ideal ratio, based on our calorie intake, is 55 per cent carbs, 15 per cent protein and 30 per cent fats. This ratio may work for some individuals, but it certainly isn’t right for everyone, particularly those whose carbohydrate intake is based on the wrong sort of carbs.

One of the most thought-provoking arguments for reducing the amount and type of carbohydrates that we eat is the story of Palaeolithic people. Genetically, there is very little difference between ourselves and our hunter- gatherer ancestors, although our diet has certainly changed.

Palaeolithic people were treading the Earth thousands of years before we started to cultivate crops and rear animals for food, and according to scientists they existed on a diet that was primarily protein. Between 60 and 90 per cent of their diet consisted of game animals, eggs, birds, reptiles and insects. The rest comprised green leafy vegetables and berries. Obviously they were leading a far more active life than the average 21st-century human being, but their diet must have been in part responsible for their healthy bones, flawless teeth and good musculature.

It was only at around the time of the agricultural revolution, about 10,000 years ago, that we started to rely on starchy vegetables such as potatoes and cereal crops for the bulk of our diet, and lifestyles became more sedentary. By 4,000 years ago the effects of the change in diet were beginning to be seen in the human body:

¨ There was a reduction in people’s stature

¨ Dental decay and malformation of the jaw had become widespread

¨ Disease and epidemics were starting to shorten the human lifespan.

12 Days of Fitness with WORKOUT ANYTIME

12 Days of Fitness with WORKOUT ANYTIME

Are you in need of a little inspiration to hit the gym this holiday season? Here’s a great workout routine to give a try this holiday season provided by the experts at WORKOUT ANYTIME. Enjoy! 

Week 1

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 
2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Squats
Push-ups 
Walking Lunges
Jumping Jacks
Burpees
Ab half roll backs (seated position, roll half way back, come up and exhale)

Week 2 

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with their moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Pop Squats
Push-ups w/alt knee
Forward Lunges with bicep curl
Plank Jacks
Mountain Climbers
Ab full roll up (lying position, roll all the way up, and exhale)

Week 3

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Squat swing with overhead tricep press
Spider-Man Push-ups 
Reverse Lunge with bicep curl
High Knees
Shoulder push-ups
Navy Seals (Ab exercise)

And More: Deals and Sales – 2014 Summer Super Sales

Just to let more people know, in case some didn’t already, there are a lot of great Summer Sales going on right now at various game distribution/retailer websites [think of them as ‘Winter Wonder Sales’ if you are in the Southern Hemisphere]. Here are a couple samples:

Good Old Games, now called GOG.com, have both ongoing sales and Time Limited Deals, with games such as The Hitman Series, Simcity2000, the Baldur’s Gate and Icewind Dale series, the Might & Magic series, the Wing Commander series, Quest For Glory and King’s Quest series, the Rollercoaster Tycoon series, and much more
(Click to see Full Size)

Steam is having it’s Summer Sale, that also has some ongoing deals with some Time Limited Sales, with games such as The Witcher series, Euro Truck Simulator series, the Left 4 Dead series, the Total War series of games, Red Alert 3, Civilization 5, and much more
(Click to see Full Size)
Some of these are Time Limited Deals, meaning that they are only ‘on’ for a few hours, or change after a few hours – so check back there once in a while and see if any games you have been waiting for are on sale – most of these are 80% or 90% off!
[For the most part, they seem to ‘stay’ on sale/remain on sale, but at a slightly higher sale price than within the ‘time limit’ (but are still available at less than regular price)]
I hope you find something you like and See You In The Games!

Men’s Body Click Diet part 4

Benign Prostatic Hypertrophy and Prostate Cancer

Benign prostatic hypertrophy is an enlargement of the prostate that’s called benign because it is not due to cancer cells. Still, the enlargement can be far from benign if it results in a lack of control over functions that we all take for granted, including urinating when you want to urinate and only then. A single urinary accident in front of your classmates in the first grade can constitute a major, unforgettable scar in one’s childhood; a repeat performance, like that of my sixty-year-old patient while standing in line at the check-in counter at O’Hare Airport, is no joke either. Nor is `benign’ the right word to describe the condition that underlies such loss of control. BPH may also involve getting up frequently at night to urinate, with the intense urgency to do so unfortunately combined with a disconcerting hesitancy of performance and a lack of reward in the volume of urine produced.

Although the symptoms of BPH can be severe, it is ironic that men with prostate cancer often have no symptoms. As they age, most men, on biopsy, show signs of prostate cancer. In fact, by the time they are in their eighties, nearly all men have prostate cancer, as defined by the typical cancerous appearance of cells under the microscope. Yet, because this particular cancer grows slowly and spreads infrequently, only a small percentage of men actually become sick or die from the disease. (A man’s lifetime risk of dying from prostate cancer is a little less than three per cent.)`’

Diet Start

Given the low odds of illness or death from prostate cancer, it’s confusing from a medical standpoint when a 60-, 70- or 80-year-old man has a prostate biopsy and is found to have cancer cells. Because the question of the actual malignancy of the condition — how likely it is that the cancer will grow quickly enough to cause problems — is difficult to resolve, it encourages a more aggressive approach to therapy than might otherwise be warranted. Since aggressive therapy frequently involves either removing testicles or taking female hormones, which can produce dramatic changes in a man’s body, this is not a trivial question.

Natural therapies for treating or, more important, preventing illness are not usually studied in the same way as pharmaceuticals, because no one can patent a naturally occurring substance like flaxseed powder and make enough money to justify the enormous expense of carefully conducted, controlled and double-blinded studies. Still, the studies show that consuming soy protein and other isoflavone and lignan-containing foods reduces the risk of prostate cancer. And the cancer data suggest strongly — and there is abundant anecdotal evidence to support it — that the same hormonal environment that leads to the high incidence of cancer in older men inour culture, but not in Chinese and Finnish men, is also associated with the risk for prostatic enlargement.5

The simple strategy for preventing the range and frequency of prostate problems is to consume more soy protein, flaxseed powder and rye fiber. If you happen to be a regular bacon, ham or sausage and eggs kind of guy, I urge you to substitute the shake, with its soy protein and flaxseed powder, at least four days a week. It’s good that you’re eating protein at your morning meal and getting the lift you need at the beginning of the day, but what you’re eating will not protect your health like soy protein and flaxseed. (If you don’t have time for breakfast, see the section for travelers in the appendix, where you’ll find a quick shortcut that will help you get your soy protein and flaxseed every day.

The Body Clock Diet and Heart Disease: It’s not Just the Cholesterol

Coronary heart disease (CHD) is the number one killer of both men and women in the United States. Each year, more than five hundred thousand Americans die of heart attacks caused by CHD. Soy intake has been shown to lower cholesterol and decrease cardiovascular disease associated with high cholesterol. There is growing scientific evidence to support this; for example, one recent study showed that a diet high in soy protein reduced cholesterol by as much as 20 per cent. 6 Other research has demonstrated that soy protein lowers triglycerides and reduces the oxidation of LDL or ‘bad’ cholesterol, which contributes to blood vessel problems linked to cardiovascular disease? And flaxseed has also been shown to lower both total and LDL cholestero1. The Body Clock Diet, which includes daily intake of soy protein and flaxseed powder, ensures that you get this important protection.

But cholesterol is not the exclusive evil agent in heart disease. Some people, especially those with complicating conditions of diabetes, tobacco smoking and a strong family history of heart disease and obesity, carry cholesterol-related risks. But most people who have heart attacks and other complications of ‘hardening of the arteries’ have fairly normal cholesterol levels.

The tide of medical thinking is changing when it comes to heart disease. It looks as if issues related to carbohydrate excess, insulin resistance and homocysteine and its control by folic acid will take center stage away from cholesterol. 9 The benefits of substances like flaxseed and soy are not due solely to lowering cholesterol. Soy and flaxseed do indeed lower serum cholesterol, but they also modify carbohydrate and fat metabolism, further decreasing your cardiovascular risk. You don’t have to be takingaim at your cholesterol to get benefits from soy, flaxseed and the Body Clock Diet.

Like many men, you may have a tendency not to think about your health, shrugging off warnings from your mother, spouse, doctor and children as well as newspapers and television programs that try to scare or educate you about activities that are dangerous to your well-being. Nor do you want to listen to me when I say that failure to adhere to basic circadian principles may eventually show up as something noticeably wrong with your health. But my advice is simple: there are some painless things you can do to reap what are potentially major rewards for your long-term health.

Globesity continue…

WHY WERE PALAEOLITHIC PEOPLE SO HEALTHY?

  • They had an active lifestyle
  • Their protein intake was far higher in polyunsaturated fats, because their animals were smaller and wild
  • Their consumption of fibre was far higher than ours, at around 100g (31/2oz) per day
  • The plants and berries they were eating were providing them with around 300 times more immune- boosting and antioxidant phytonutrients (plant nutrients) and vitamin C than the average diet offers today.

Warning signs from the present day

Diet Start

  • 300,000 American deaths per year are due to obesity-related non- communicable diseases. This accounts for 12 per cent of the entire US healthcare expenditure, costing the country $100 billion (270 billion) per year. The cost of a cheeseburger may be coming down, but its cost to the nation’s health most certainly is not.

In 2002 the Centre for Disease Control and Prevention (CDC) in Atlanta estimated that 17 million Americans, including 151,000 under the age of 20, now have diabetes. Type 2 (or adult-onset) diabetes is a disorder resulting from the body’s inability to make enough insulin (a hormone that regulates glucose metabolism in the body) – and it can be life-threatening. The risks of heart disease and stroke increase two- to fourfold and the death rate doubles in diabetics. The disease is also the leading cause of blindness, kidney failure and amputations.

  • In 2002 the National Audit Office in the UK revealed the following facts:

58 per cent of adults in the UK are technically overweight, and 20 per cent are clinically obese.

In 1998 around 30,000 people in England alone died prematurely as a direct consequence of being overweight.

In the same year obesity was responsible for 1.8 million lost working days, costing the National Health Service and the economy of the country an estimated 22.5 billion ($3.6 billion).

The number of people who are obese in England has tripled over the last 20 years, and if this trend continues, one in four people will be obese by the year 2010.

  • North American Inuits, whose native diet traditionally consists of whale meat, berries and moss, had no history of heart disease, diabetes or dental decay – until they introduced white flour and sugar into their diets.

Why you will lose false fat

Donna didn’t look fat, at least not in the leggings and long sweater she was wearing as she entered my office. Her legs looked slender and fit, and her sweater hid the rest. But she felt fat.

`I’ve got a guy’s type of weight problem,’ she said as she sat down. She was animated and energetic, but obviously frustrated. ‘Women are supposed to collect fat in their hips and thighs — aren’t they? — but mine sticks right here.’ She patted her stomach. When she was sitting, I could see that it bulged, even under the thick sweater. ‘I hardly ever overeat,’ she said, `but since I’ve hit 40, I get no forgiveness from my body. It’s like my metabolism took early retirement. I take two bites and I can feel the fat cells around my waist start to expand. Literally. I pinch my love handles, and they’re thicker before I even get up from the table.’ She looked at me expectantly, as if I might not believe her. ‘My last doctor,’ she said with a sour look, ‘told me there’s no way that food could make me fat that fast. But I can feel it happening.’ Again, she searched my face for reassurance. She had an upbeat personality, but she was almost ready to give up. She ate carefully, exercised hard, and still carried 20 extra pounds.

Diet Start

`It’s not your imagination,’ I said. ‘That feeling of instant weight gain happens to a lot of people. But it’s not fat you’re gaining. It’s fluid retention and bloating, and you’re probably getting it from food reactions. A lot of the swelling and bloating from food reactions occurs directly in and around the gut.

That’s why you feel it in your midsection right away.’

`If it’s not fat,’ she said, ‘why doesn’t it leave as fast as it comes? I look like this almost all the time.’

`Your biochemistry won’t allow it to go away, because your body is trying to protect you. When you eat reactive foods, your body sees them as foreign substances, almost as poisons, and it goes all out to protect you. It can take two to three days to stop reacting to some foods.’

Tut it’s not like I eat junk. I’m an old-time you-are-what you-eat type. I was eating granola before they even had a name for it.’ She smiled, but I could see she felt cheated. For many years, she’d followed all the rules — but the rules had been wrong.

`People can become reactive to healthy foods,’ I said, ‘even granola, if you eat it all the time. Do you eat a lot of non-fat and artificially sweetened foods?’

`Now that my metabolism has slowed down, I’ve got to.’

`I hate to say it, but some of those “lite” foods may be doing you more harm than good. If you’re reactive to a food, it can be virtually calorie-free and still make you gain weight. Even diet soda can cause bloating and swelling.’ She looked surprised. Most people these days are so accustomed to counting calories and fat grams — the quantity of their food — that they forget about the importance of quality.

`I don’t think you’re eating too many calories,’ I said. ‘And I don’t think your age is the real problem. Your metabolism is slowing down just 5 per cent every decade, and that’s not enough to cause what you’re experiencing. I think you’ve just developed some food reactions over a long period of time. When you resolve them, you’ll lost your weight.’

Tut I was tested for allergies and they didn’t find any.’ `Did they explain that not all food reactions are allergies?’ I asked.

`No.’

I wasn’t surprised. Most doctors don’t really understand food reactions. They usually have an all-or-nothing attitude; they think that you either have a classic food allergy, with hives and wheezing, or you have nothing at all.

I gave Donna a brief rundown on how food reactions work and how they cause bloating and swelling. I explained it out of respect for her. Some doctors think it’s acceptable to tell patients what to do, without telling them why, but I object to that approach. If patients are willing to change their lives by taking my advice, they deserve to know exactly why these changes will help.

As I gave all the details to Donna, she listened attentively and took notes. Over the next few weeks, she eliminated her false fat foods — one of which was oats, a primary ingredient in most granola — and dropped about 15 pounds.

Now I’ll give you the details on how food reactions get started. Then we’ll look at how they cause bloating and swelling.

If you’re going to make changes in your life, you deserve to know exactly what’s going on.

I’m sure some of this information will hit home. Often, when I tell patients about food reactions, they say, ‘That’s me you’re describing.’

My Trip to Pakistan – Islamabad December 2011

This is my first trip to Pakistan after 9/11. The last time I was in Pakistan was in 2008, most of the contacts I had made during my last visits have not resulted in any business. However I was able to secure a training assignment which; believe it or not took 2 years to secure. It just goes to show how some clients work. The need for this training was identified over 2 years ago but due to financial and other ground realities they were not able to run the training course in Pakistan.



The travel plans were made and I set off to Pakistan on the 9th of December. The journey started well as I got upgraded to business class and had a pleasant journey to Karachi. I was scheduled to take a domestic flight from Karachi to Islamabad. Things started to go bad when I landed. I made my way to the check in counter to learn that the PIA (Pakistan International Airlines) flight to Islamabad was cancelled. They just did not bother to contact the agents or the passengers to inform them of the cancellation. The PIA ground staff were however polite and quickly arranged me to stay at the Airport Hotel and take the first flight out to Islamabad on the 10th morning. I had to call my client and the hotel in Islamabad to inform them of the changes to my itinerary. Hurrah to mobile roaming!


My perceptions of an Airport Hotel were based on the other airport hotels which I had stayed in (Dubai, Bangkok, Amsterdam); however the Airport Hotel in Karachi is another matter altogether. It is a real dump. I am not running down Pakistan or its people as I have stayed in very good hotels in Karachi and Lahore on my previous visits to Pakistan. This was a real house of horror. The rooms were dirty and smelly, the bathrooms were dirty and the dining hall was something else altogether. The table cloths were full of food stains and looked like they have never been bleached since the day they were made.


The management of this hotel needs major overhauling if it is to be an airport hotel. The staff of the hotel belongs in a farm looking after animals and not in a hotel serving weary travelers. They have no idea of how to handle guest in the hospitality industry.


I left the hotel early morning (on the 10th) and made my way to the airport to catch the flight to Islamabad. Things ran smoothly from then on and reached Islamabad on time. I was met by the Islamabad Hotel (http://www.islamabadhotel.com.pk/ ) representative at the airport and was taken to the car park to embark on the short drive to the Hotel. In the car park I saw this amazing site of a fork lift being used to move cars that had parked violating the parking rules.

I settled in at the hotel and met the client in the evening to prepare for the start of the training. The training on Institutional & Organizational Development will run for 5 days with 25 participants.


The first day of the training went well and the atmosphere in the training room was good and positive the client was very happy at the end of the day and was keen to keep the same momentum during then next 4 days.


The second day of the training also went along as planned and was well received by the participants. After the training I went to the shops (Jinnah Super Market) with one of the participants as my guide. Islamabad boasts of quite a few good shopping areas with some well stocked shops in clothing. The main thing that struck me is that you do not see poverty on every corner. Islamabad seems to have a majority of middleclass to upper class people living in the city. Quite a contrast to Karachi and Lahore where you do see poverty as it is common in other cities of South Asia.


The third day of training went smoothly without incident. After the training I met the managing director of a company which I met last when I was in Lahore in 2008. We were unable to build a working business relationship since we last met (9/11, war in Sri Lanka and the deterioration of the security in Pakistan which led to the Sri Lankan cricket team being attacked). We discussed the opportunities for joint collaboration and agreed to take the business relationship to the next level. Only time will tell is we are able to do this.


The fourth day of the training too went well and we will be going out for dinner with all the participants. We all made our way to Monal Restaurant located about 4000 feet above sea level (http://themonal.com/monal.htm ) at the top of the hill at Margalla Hills National Park for a night time view of the city of Islamabad.

I recommend to all who visit Islamabad to go for dinner at this restaurant, the view and the food was exceptional and so was the service. After dinner we went to Gelato Affair (www.gelatoaffair.com ) at the Gole Market to have dessert. The ice cream selection available was enormous and great tasting.


The last day of training went according to plan and was able to conclude the training program on time as planned. The participants were appreciative of the efforts of the trainer and received excellent feedback through the training evaluation. After the customary goodbyes and promises to keep in touch we concluded assignment.


The trip back to Colombo was on schedule; unlike while arriving at Islamabad the flight back to Karachi was on time and managed to arrive at Karachi without any hassle.

Battlefield Play4Free – PlayTesting The AEK-971 Assault Rifle (One Full Round – Myanmar – Raw Gameplay [Unedited] Video)

Battlefield Play4Free and The Daily Draw

Just a quick primer for those that don’t know; Battlefield Play4Free is a Free-To-Play title, which means it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money. In this game, you do so by purchasing “Play4Free Funds” that you can then use in the in-game Store. There is also a nice feature offered where you can win ‘prizes’ (weapons, armor, clothing, etc) from a game called The Daily Draw at the main Battlefield Play4Free website. You can play once every day, choosing a card from a random draw of eight and the card you choose will be an item ‘underneath’.

The items possible to win range from temporary one-day-use-only weapons and clothing, to seven-day-use ones, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future. The Daily Draw also gives a chance to win ‘Boosts’, where you can earn extra Credits [for instance], as seen in the screenshot below:

The AEK-971 Assault Rifle

I recently won the AEK-971 in The Daily Draw on my Assault class soldier and thought I’d try it out and see how it felt and quickly write a post about it [I call these ‘PlayTests’]. Now, I am not a gun expert or know a lot about the statistics of the guns, so I will mainly be discussing briefly here how the gun ‘feels’ and ‘plays’, especially compared to the default G3A4 Assault Rifle.

The AEK-971 unlocks nice and early at Soldier Level 3, but the main reason for this seems to be that it isn’t supposed to be very different from the Default Assault Class Rifle. As you can see from the comparison above, which is the main Store/Inventory screen information for the weapons, the only real difference is the amount of damage it can do. It has the same accuracy rating as the G3A4, the same range, and the same amount of ammo in the mags. After winning it in The Daily Draw, I played a few rounds with AEK-971 and originally recorded a couple of full matches. Here is one full match, shared unedited for you [a ‘Raw Gameplay’ video], testing out the AEK-971:

I was also testing out the Trial of CyberLink’s PowerDirector 12 for editing.
A Review article about that application – with Tips – Coming Soon™!

Despite not being listed as any more accurate than the G3, I felt more ‘capable’ with the AEK (as though I could ‘put up a fight’ a lot better), probably due to the increased damage. It feels a little more accurate too, even though it isn’t really supposed to be, according to the Store/Inventory info for the gun. So, I figured this is a great time to do some testing! [Yay, tests! lol]

AEK-971 Accuracy Analysis

I did some basic analysis on the recoil pattern of this rifle and it is indeed similar to the default assault rifle, but the AEK is ever-so-slightly more accurate, in my opinion. Here is an example of a test I did, a screenshot of the spread patterns, collecting the bullet markings, below:

Coloured spray paint marking the AEK-971’s Bullet Spread, on average
(Click to see Full Size)
  • The left side is the spread while ‘shooting from the hip’, not using the sights, just standing there holding down the trigger  [the spray painted arrow is red-coloured as in, ‘try not to do this at all if you can, unless in very close quarters combat’]
  • The right side is the spread while ‘zoomed in’, that is, using the sights on the gun (it would use a scope if there was one), still just standing there holding down the trigger  [the spray painted arrow is yellow-coloured as in, ‘try to avoid this’]
  • In the middle is the spread while zoomed in/using the sights, crouching down, still holding down the trigger though – but also now compensating for the recoil of the gun (attempting to contain the spread into a small area) – in this case, slowly pulling DOWN the mouse while firing since the recoil of this gun pulls the barrel UP  [the spray painted box is green-coloured as in, it is recommended to do this (even better if you can tap the trigger instead of holding it down)]

As you can see, even though the rated accuracy for this gun is “Low”, you can get a pretty decent containment of the spread, by kneeling down, using the sights, and compensating for the recoil by moving the mouse accordingly [this little tip helps with all guns].

In most games, you can try to compensate for the recoil of a gun by slowly moving the mouse in the opposing direction to where the barrel travels. For instance, if the recoil pulls the barrel of the gun left, when shooting, moving the mouse to the right then, will cancel out some of the recoil and make for a smaller spread of bullets and easier/faster repositioning for the next shot. Try to remember that each gun will be  different in it’s recoil and which direction you should compensate, when using each weapon though. 
[Note that due to game programmers making bullets ‘miss’ (no matter what), in an attempt to imitate reality (which has imperfections in the gun and bullets, air changes, etc), it will never be possible to fully compensate/correct for the ‘spread’ of bullets in a gun (this goes for most games)]. 



In my tests, the Assault Default G3A4 seemed to pull up and away to the left slightly, when shooting it. Holding down the trigger longer, the gun climbs way up into the sky easily (hence the “Low” Accuracy rating, I assume). For the AEK-971, it does still pull up, but it does not pull to the left in the same way as the G3A4, especially when using the sights. It sort of does a light ‘stepping’ to the left and then to the right, somewhat randomly [whatever the algorithm is in the programming]. This, to me, makes it ever-so-slightly more accurate in the ‘feel’ of the gun, because while it still ‘goes all over the place’ when shooting, it sort of compensates for itself just a bit, and the end result is more of a direct climb up in the recoil, something that felt, to me, easier to compensate for than with the Assault default G3. (I assume this very slight change in the spread/recoil is not enough to win this gun a “Medium” rating in Accuracy, but it is enough to make you have to Level to 3 in order to be able to purchase it..).

Close-To-Medium Range Kill with the AEK-971 in Myanmar. Even with the ‘side-stepping’ that the gun does (and the enemy strafed around as he ran out towards me from behind the rock in the center of the screen) I still got the kill, mostly due to the Very High Damage Rating of the weapon
(Click to see Full Size)

In Conclusion

Overall, the AEK-971 was similar to the default Assault class rifle, the G3A4, when playing. To me, it did feel slightly more accurate, but not by much. If you are having a really hard time hitting people with the G3A4, your accuracy won’t increase very much at all if you purchased this rifle. However, if you are getting used to the default Assault gun, this one packs a lot more punch, and you’ll be getting more kills overall if you upgrade to it. Because I recently won this gun Permanently [during the course of compiling this article, yes it does happen in The Daily Draw! woot] I can’t see the current price for this rifle anymore, to purchase it from the in-game Store; but last time checking, it was only 300 Credits to try it out for one full day. It was also listed as [what I call] ‘Earnable’ because, if you can rack up 45,000 Credits, you won’t have to pay for upgrading to this rifle with any Real Money at all (you can just use the Credits). If you did buy some Play4Free Funds and have 1,250 to spare, you can purchase it at anytime (not having to wait until Soldier Level 3), permanently. So in closing, PlayTesting the AEK-971, I found it slightly better than the Default Assault Class Rifle, even if it only ‘felt’ that way due to the higher damage it does.

Long Range Kill with the AEK-971 in Myanmar. The thin iron sights of the gun (default sights) help a lot with targeting farther away. With the Very High Damage Rating – even though the gun has a Low Accuracy Rating – single-shot/tap shooting can still make it lethal at range, when needed
(Click to see Full Size)

Have fun trying it out for yourself sometime and See You In The Games!

Gameplay Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

My Trip to Bangladesh June 2011. Cont…..

The assignment is now over; managed to progress the milestones without much trouble given that I lost a total of 4 days to strikes. The draft evaluation report was well accepted by the client; now comes the tricky part getting comments on the report. There are basically 2 types of comments that a consultant is likely to get on a report. The first being, comments regarding the structure / formatting and style of the report and some times regarding the language. We have all had different educations and are used to a particular vocabulary; further at some point in our lives we have written a report and we generally stick to that structure while accommodating subject related topics. My rule of thumb is that I give in to these requests as it is just not worth the discussion regarding it. I prefer to use that time for some thing else. The second being, comments regarding the contents such as findings, recommendations etc. Here I generally play hard ball, unless I am presented with an argument backed by facts / proof. This goes to the hart of your position as an independent, unbiased professional consultant. I look forward to these comments as they challenge your thinking and help you to be a better consultant as well. I am supposed to get all the comments by next Friday as the end of the assignment / submission of the final report scheduled after 2 days of receiving all the comments.
During my last week in Dhaka my health deteriorated (food poisoning). My fault for eating some pastries (short eats) offered to me during a meeting. Momentary laps of concentration. . I have been coming to Bangladesh since 2006 and this is the first time this happened to me. My dread was the journey back to Colombo which I made with the aid of Imodium. I know this drug is banned in some countries but it is a life saver when traveling.
I do not have any other assignments lined up at this moment. Now that I am back in Colombo I need to tie up some outstanding issues. These are in fact 3 reports, 1) finalizing the report for the current Bangladesh Assignment, 2) finalize the Strategic Plan for my client in Batticaloa and 3) Submit a reflection I did for myself for the institute of consulting.

The 2017 Extra Life 24-Hour Gaming Marathon, In Support of The Children’s Miracle Network Hospitals [Post Updated All Weekend]

Wow, it’s that time again – time to try to play some games for a cause – in my case, I play as much as I can through the weekend for the Alberta Children’s Hospital Foundation (as I was born and raised in the province of Alberta, Canada).

This year actually ‘sprung up’ on me, as I haven’t been feeling well these past few weeks… I have had a bit of a fever [38C/100F+]  the entire time and have been extra sore and slow (I say ‘extra’ as I myself have a condition, called Myalgic Encephalomyelitis – which is basically an infection of the brain and spine that causes Fibromyalgia and Chronic Fatigue symptoms (pain and tiredness, respectively) – a condition I have had for 12 years now [wow it’s been that long]). So, playing for this charity every year is special to me and something I have tried to do every since I heard of Extra Life back in 2015.

Image Link to The Extra Life main website, where you can see all of the other wonderful people participating in this event, many of them streaming their marathon Live on Twitch and other streaming sites! (Link opens in a new window)

Due to my own illness then, I cannot play 24 hours straight through, but I count my gaming hours Playing For The Kids™ over the entire weekend of the event (in this years’ case, Saturday November 4th and Sunday November 5th), hopefully tallying 24 hours in total.. (in the case that I am not ‘up to it’ for that long, I allow myself to count my wife’s gaming time, as she generously tries to play beside me and add hours, for a “Total Household Hours” amount). [I always hope that in the spirit of the event and the intention, that my dear readers and those at Extra Life find this acceptable]

As has occurred in past years, I do not have the ability/energy to set up and maintain a constant Stream of some sort yet (through Twitch, YouTube and other streaming services); but what I do is I share some details and Screenshots (and Videos if I can) of what I am able to play, here at The Blog, in an ongoing and updated post – one that I will be adding to as the weekend progresses (including Sunday Night), right here!

So, follow along with me as I Play For The Kids™ all weekend, updating this very post as I go – and if you wish to take part, you can Pledge/Donate directly to the Extra Life charity via the Logo/Image just below or through this link for 2017: https://www.extra-life.org/participant/247989 – and whether you pledge anything or not, feel free to just return to this posting for gameplay time Updates, Screenshots, some Video Clips from the weekend – and more!

See You In The Game!

Update, Saturday 12:30PM MST: Beginning The Marathon, with the initial post above and gathering snacks and drinks to start Playing For The Kids™!

Update, Saturday 7:30 PM MST: As usual with this event, I always try to play some good’ol Minecraft Hardcore Mode (you only get one life!), to see how far I can get during the marathon.

Usually, I don’t get too far and starting out this year was no exception. I spawned in a new Hardcore world – in a wintery biome which I found out later was “Cold Taiga” – which meant, although there were plenty of Trees for Wood to use, there were no seeds to find and plant right away for food, there were no large hills in sight (for easy access to Stone and Coal to cook any foods I might come across) except in the far distance – and as night fell, I died right away to a band of two skeletons and a zombie that came out from behind one of the many, many trees…. Wow what a harsh start!

I began another Hardcore world, hoping to spawn in a relatively easier biome – and I did… I quickly collected Seeds from the Grass around me and began a Garden to grow Wheat RIGHT AWAY, heh. I had to cull some of the many Pigs I found around me in order to eat, planning on replenishing their numbers later on. I then carved out a little Mud Hut in the hillside nearby and settled in for the night…

Updates on that World as I play more – but for now I have to stop and take another break. More to come!

Total Gameplay Time: ~2.0 hrs

Update, Sunday 10:30 AM MST: I played last night right up until I fell asleep, starting a “Just One Life™” character in Fallout 4 (where I stop playing and delete that character upon dying just once), and was popping into various games for short periods of time, like Marvel Heroes (which has Daily Login Rewards, with small ‘gifts’ every few days you enter the game – and a Free Hero available at the no doubt-difficult-to-get-to, Day 300) [Even if I do not have the energy to play for a while, I try to pop in to register a login, heh – to see how far I can go].

I also popped into The Elder Scrolls: Legends, a Virtual Collectible Card Game based on The Elder Scrolls series [a good game for slow-paced-yet-still-kinda-flashy-and-enjoyable gameplay that you can play against the CPU/AI only, if you desire to]. I also ran a few Benchmarks and did a few quick driving tests in Grand Theft Auto V, trying out some settings I saw in YouTube videos online (to see if I get the same framerate with the same hardware) – but I felt a bit weird at the concept of playing GTA games for this Event [shouldn’t I be playing games kids would play, or at least Family-Friendly games? lol], so I didn’t stay in Los Santos very long.
Today, I plan on playing as much as I can, continuing my Minecraft: Hardcore Mode world, and my Fallout 4 “Just One Life™” character, along with some Elder Scrolls Online gameplay, hoping to get up to 24 hours in Total. I’ll also post more Screenshots next Update. Here I go!
Total Gameplay Time: ~ 5.0 hrs


Update, Monday 9:30 AM MST: Well I played as much as I could… 
In Minecraft, I continued my Hardcore Mode world (actually Marathon 2017 World 2.0, as I died without even leaving the first Biome in the first one (above)), making a nice Garden along the shore of a River nearby…
When night fell upon the world, since I was out on a ‘walkabout’, looking around the Biome, I quickly dug into the nearest hill, making myself a small mudhut house to Craft and Cook in… I should have maybe stayed in it all night, but I thought I would get started on collecting more Food, by killing a few Spiders and using their silk to make String, crafting a Fishing Pole.. And what happened? Two Skeletons came out from behind a tree and as I ran back toward my little ‘second mud hut’, they cornered me and filled me full of arrows, as I weakly flailed my Rock Sword back and forth… I hope my ‘Deeds Will Be Remembered’ [hehe Diablo2]
To make myself feel better, I popped in an out of a few games for the next few hours… I tried out Need for Speed: Most Wanted, which seemed like an open-world racing game, with good graphics.
Playing that game reminded me of a ‘test’ I wanted to do (I love running Benchmarks and Tests, heh) with Grand Theft Auto Five (GTAV), where I saw a video of someone running it on High Settings, to test out the differences between how it performed on two different CPUs (Processors, referring to the ‘main engines’ of a computer). So I started up GTAV and ran the Benchmark (to see if I got similar results) and drove around the city a bit.
While the game looked good, I felt a little weird playing such a ‘mature’ game during a Marathon for children’s charities [lol shouldn’t I be playing ‘family friendly games’? or does it matter?], so I just took a few Screenshots (of course), and then left it for now, for something else.

The Beta for Paladins, a MOBA-slash-FPS game by the makers of Tribes:Ascend and Smite, was going on, so I popped into that game, going through the Training and playing for a while afterward.


Total Gameplay Time: ~ 10.0 hrs

Alas, just like before, I couldn’t quite make the 24 Hours on my own… My own illness [where I am sore a lot and get tired easily] keeps me from playing for very long at one time. However, as I stated earlier, what I like to do, is include the game playing time that My Better Half does alongside me, as part of a “Household Total”… If I include her generous contribution, the new total becomes:

Total Household Time: ~23.0 hrs


Haha – even with her inclusion, I did not ‘quite’ make the 24 Hours in total… But, as stated above, I hope that in the spirit of the Marathon and its’ intention – and mine – I hope that what did accrue would be acceptable… In fact; I do not think that ‘total game time’ is the main goal of this Marathon… This time is perhaps to literally ‘take time’, to think about those that are much more unfortunate than us, and in the case of this Charity, much younger than most of us… During this Day or Weekend, whichever it is, I think, we remember those out there, those that are in need. In this spirit/state-of-mind; I thank you Dear Reader, for following along in this small adventure. Whether you donated at all or not, I hope that you played a little bit of some game, took a little bit of time, to think about those that are in much more pain and need than most of us are. And I thank you for following me on this small journey. Take care, my unmet friend – and perhaps See You In The Game.

1923 Buick Roadster with a cool spare tire lock and tool kit

July Currently

How did it get to be July already?!?!

I’m still recovering from 3 days of EdTech awesomeness at the ISTE conference and linking up with Farley at Oh’ Boy 4th Grade for this month’s currently.

Listening – My two-year-old has recently become obsessed with Sofia the First on Disney Jr. It’s a cute show, but not my favorite of the toddler choices…not that I’ve become a connoisseur of toddler TV or anything…

Loving – I started a garden last summer, but it became somewhat overgrown when Georgia had its monsoon season last summer, and it didn’t turn out as well as I’d hoped. This year, we’re in a new house, and while I don’t have the yard space (or HOA permission) for a full garden, I have space on my deck for a container garden. I’m growing bell peppers, jalapeno peppers, herbs, tomatoes, squash, cucumbers, and carrots, and they’re really coming along! My daughter and I check on them every afternoon, so it has become a fun summer project.

Thinking – This was my first year to attend ISTE, and I learned SO much. It was overwhelming, exhausting, and inspiring, and I just need a little time to process it all. I’ll start blogging tomorrow about some of the coolest stuff I learned.

Wanting – I’m moving into a new classroom this year, so I had to box up all of my stuff at the end of the school year. I’m hoping (*fingers crossed*) that it all got moved to the new room (in a different building on our campus) so I can begin unpacking soon.

Needing – I’m a little panicked that it’s July already. I have a lot of projects that are in various stages of completion, and while I know better than to think I’ll get them all done, I’d like to check a few more items off my list before I go back to school in a few weeks.

4th Plans – I’m looking forward to a three day weekend with my husband and daughter. We don’t have any big plans, but we may take Sydney to see her first fireworks extravaganza.

On a final note, as I prepare to move into my new classroom, I’m starting to think about decorating. The wall colors are very different in my new room, so my old stuff might not work. Here’s a quick pic of the new room from my Instagram account:

I’d love to hear your color schemes/decorating ideas if you have any! The move-in and shopping spree will start next week!

Have a great weekend!

Proven Ways to Avoid Holiday Weight Gain

As we head into the holidays most Americans will gain between 8 and 12lbs between Halloween and New Year’s Day.  However, there are ways to avoid this weight gain!
Here are some key tips:
Eat before you drink and celebrate and before holiday parties.     Going into a holiday party on empty and hungry is a sure-fire way to overeat.    Alcohol intake boosts appetite to begin with and if you start out without anything in the tank it just gets worse!    This does not mean overeating – eat a sensible meal about 2 hours before you go to the party.
Try to choose higher protein foods first because protein helps with satiety (feeling satisfied and not hungry).
Fill up on Fiber Rich Foods – which also help with satiety and help create a feeling of fullness when consumed with water.  Focus on the raw veggies and yes you can dip them in some dip that has some fat because together fiber and fat can really assist in managing hunger along with protein.
Eat some fat – that’s right eat some fat!   Fats also are key for satiety.   That being said a little goes a long way!
Bring your own food to a party.   Rather than having only high calorie, high sugar and high fat foods bring something you enjoy that is also healthy along with you!
Eat slowly and chew your food thoroughly – seems simple and it is.    It is also VERY effective for limiting food intake!
Use smaller plates, bowls and glasses – all of which help to slow down food and beverage intake and make you more conscious of how much you are consuming!
Try to Minimize Sugar and Starch Intake – both sugar and starch wind up as glucose (blood sugar) and high intake drives insulin which results in rebound hunger.      High sugar and starch intake increases hunger – particularly when drinking alcohol because alcohol acts like a super sugar and also drives insulin response.
Pause before getting seconds – as with slower eating and deliberately chewing food this can give your body time to realize it is no longer really hungry.
If you are doing the entertaining have extra containers you are ready to give away so guests can leave with some of the extra food!

Try not to eat in front of the T.V. which distracts you from how you feel and results in mindless eating!
Consider planning a cheat meal but have a plan for how much you are going to eat!   One meal can knock you off course but most of the holiday weight gain comes from completely giving up on healthy eating for many meals.   Planning one cheat meal every week and planning on eating a set amount of the foods you may be craving can work for many people rather than mindlessly eating.      If you plan your meal including your portions of alcohol, sweets, fat and sugar you can limit the damage and still have a great time!
Drink Water.   Often quoted and still true – water is the best beverage and avoiding sugar laden drinks in favor of still or sparkling water can make a big difference in minimizing holiday weight gain.
Workout!   Working out improves mental outlook and burns some calories while reducing stress levels!    When we are stressed we overeat!   Just 10 minutes a day can make a big difference!

Get Your Sleep.   Lack of sleep is terrible for your health and particularly bad for driving appetite and overeating.   Lack of sleep causes hunger and excessive eating because the normal feedback mechanisms that tell you that you are full do not work properly when you are tired.   Basically, a tired brain tells you to eat to feel better and it is VERY hard to resist these urges when tired!

The trip to Hyderabad India

I am starting my next assignment on the 3rd of October 2009 in Hyderabad India. This will be my 4th trip to India in the last 2 years. Going to india is a funny thing for me as I cant wait to get there. Once I am there I get the feeling that I need to get back home (Sri Lanka) soon.

I have applied for my visa nd waiting to collect it. will do it tomorrow.

Planetside 2 – Video Tutorial: How To Attack and Defend a Facility – Bio Lab (Subtitled) [Short Version]

In this brief Tutorial focused on New Players to Planetside 2, I present concepts to attacking and defending a large facility with multiple objectives, such as:

  • capture points
  • shields
  • generators
  • spawn rooms
  • terminals
and more…
In the video below, I am playing on the New Conglomerate FACTION. I CAPITALIZE full words that are either important structures and names to remember, or are important concepts to learn for battle.
During this battle at a large base, I show briefly how to use your HUD (Head Up Display) to locate OBJECTIVES, what some icons on the screen represent, where major structures are and important areas and aspects of the base.

Although my FACTION successfully takes over a Bio Lab, many of the concepts presented in the tutorial will carry over to battles at other large facilities, such as Amplifier Stations and Technological Plants.
[A separate tutorial for an Amp Station can be seen here:
http://gametipsandmore.blogspot.ca/2012/12/planetside-2-video-tutorial-how-to.html]

With subtitles over sections of a Bio Lab battle, playing as the NC (New Conglomerate), I go over some concepts a few times to make sure they set in for New Recruits, but for the most part, I stick to the main objectives of the base and how to quickly locate them, as well as the various ways to get inside..
Enjoy and See You In the Game!

WORKOUT ANYTIME in the Daily News

WORKOUT ANYTIME in the Daily News

Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
View the full article here. 

How to Cope with Too Many Snow Days

Ice and Snow, Go Away!

This has been the worst winter since I moved to Atlanta eight years ago. We have six-week terms, and during these last six weeks, we lost two days to extremely cold temperatures (by Southern standards), three additional days because of the “snowpocalypse” that buried Atlanta, and now I’m home again due to Winter Storm “Pax” that will likely shut us down the rest of the week. That’s nearly one-third of our term lost!

Adding to my dilemma, our calendar builds in week-long breaks at the end of each six week term. So we won’t be back in school next week either. It’s a serious wrinkle in my plans.

I talked to my fourth graders about this yesterday, and we worked out a plan so they could continue to work from home during these inclement weather days. It’s a really rainy, dreary day anyway (we’re at the “wintry mix” stage of the storm), so it’s not like they’d be outside sledding today. I also suspect that many parents are welcoming the activities at this stage of the winter!

Here are my suggestions for telecommuting with your class during winter weather.

Building a Virtual Classroom

1. Choose a mix of activities that can be shared with parents. I knew early last night that we’d be off today, so I found some activities that aligned with what we’re studying right now. While many of the activities require computer access, I purposefully included some that do not. For example, we’re building weather instruments out of household items, writing stories, continuing our reading, etc. But we’re also using some online resources.

2. Take advantage of online instructional videos. Two of my favorite free resources are LearnZillion and Khan Academy. I selected videos that align with the math and ELA content we’re working on now.

3. Stay accessible through your Learning Management System. We use Edmodo in our class, and it’s a great tool for turning in assignments and having class discussions. I’m checking in throughout the day to answer students’ questions and participate in the discussion questions I set up there earlier.

4. Take advantage of the resources students have at home. I teach in a 1:1 iPad classroom, so we’re constantly on iPads. There are lots of flash-based games that we can’t run on our iPads, however. I’m fortunate that all of my students have computers at home, so I’m incorporating more of those activities for students to complete. I’m also choosing some really fun and engaging simulation games that we just don’t ever get to in class. Two examples:

Law Craft – For the record, all of the games at iCivics.org are worth checking out. In this particular one, students work to craft a law and take it through the legislative process. They have to build support by making concessions, work out the details through committees, and ultimately get the president to sign it. It teaches a lot about how a bill becomes a law.

Edheads Weather – This aligns with the weather forecasting aspect of our weather unit. Students will work through different weather maps to report the weather and predict future weather events. It’s another great interactive game. I highly recommend the activities at the Edheads website. The only downside is that there are lots of ads, and sometimes pop-ups.

5. Be flexible – I can’t really help students troubleshoot tech issues on their home computers, and I can’t make them do the activities at home. I’m not making any of the activities mandatory, but they’re still available. I’m hoping that with the good mix of opportunities, parents and students will take advantage of the resources I’m offering. But I won’t punish a student who doesn’t. If even a few kids do the activities, it’s better than writing off the weather days as a complete loss.

Preparation is Key
It would be impossible to implement this plan with fourth graders if a lot of our technology norms and routines hadn’t already been established. My students are familiar with my class website, Edmodo, and my expectations. Integrating technology in the classroom makes the transition to our virtual classroom seamless.

How do you handle inclement weather days with your class? Do you have any plans resources to keep students engaged while they’re away from the classroom? I’d love to hear your ideas in the comments!

On an unrelated note, I have been MIA from the blogging world since October. As I’ve mentioned before, I’ve started working on a PhD in addition to teaching full-time and managing my toddler, so I’ve been insanely busy! I have an amazing student teacher this semester, however, so I’m starting to delegate more. I’m hopeful that will free up a little more time and energy so I can get back to blogging and reading all the stuff I’ve missed. Perhaps these weather days will also assist with that!

Exercise and Fall Prevention

As people get older one of the biggest threats to their health and independence are falls.  A brief review of the statistics on falls provides a sobering view of the threat.

 Falls are the #1 cause of death as a result of unintentional injury among people 75 and older and the #2 cause of death as a result of unintentional injury among people age 65 – 74.
Falls are the #1 cause of non-fatal unintentional injuries treated in hospital emergency rooms in every age group except ages 15 – 24.
Fall result in the second most expensive worker’s compensation claims with an average cost of $23,929.
One out of every three people older than 65 will fall this year.
50% of the people older than 65 who have fallen will fall again in the next 12 months.
Most falls are unreported (even serious falls) because senior fear losing their independence, and many seniors would rather die than lose their independence.
The treatment of osteoporosis with drugs is very ineffective at preventing fractures because it does nothing to prevent the primary cause of fractures which is falls.
Modifiable Risk Factors for Falls

Strength (in particular lower body and core strength)
Mobility (of ankle, knee and hip in particular)
Fear of falling from previous fall/s resulting in altered gate and restricted activity levels which further increases fall risk
Poor Balance which has three systems (visual, inner ear, proprioception)
Impaired Vision
Cognitive Status/Mood
Environmental Factors (slippery floors, rugs, poor lighting, etc.
Medication Side Effects
Exercise for Fall Prevention
Exercise can help address several fall risk factors including strength, mobility, balance along with improved cognitive status.
The most effective exercise boosts lower body and core strength while including a balance component that can be adjusted to each individual’s current capabilities.   This exercise should be weight bearing whenever possible and functional in nature.
reACT – Rapid Eccentric Anaerobic Core Trainer

One of the finest ways to address the exercise component of a fall prevention program is the use of the reACT Trainer.    The reACT Trainer provides a no impact training stimulus with a self-selected range of motion and allows for progressive balance challenge to fit just about any ability level.  
The reACT Trainer is a functional eccentric trainer meaning it provides eccentric dominant exercise that is highly functional in nature with strong emphasis on integrated functional movements in multiple planes of motion with the ability to adjust movement speed to increase or decrease the challenge level.   It is also a very safe training modality.
For more information on how the reACT Trainer can help prevent falls check out the following videos:
https://www.youtube.com/watch?v=IBjKkvuXrYE&t=213s

https://www.youtube.com/watch?v=WXljK8BbhLg&t=309s– instructional video

Quick Tip: Can’t Record Your Game At All? (64-bit/32-bit Fix)

Just a quick tip for when it seems like you cannot record your game ‘at all’:
64-bit computing is still relatively new for home users, which means that not all 64-bit hardware and applications communicate without problems. Many game recording apps simply can’t record games that operate in 64-bit modes. Just look for a 32-bit version of your game/gameclient and then your game recording program (no matter which one you use, be it Dxtory, Bandicam, MSI Afterburner..) should be able to record the screen. [For games that use Java (eg. Minecraft), download the 32-bit Java at their website]

See you in the games!

Interested in opening your own WORKOUT ANYTIME?

Think big. Keep it simple. Do it with integrity.”

Those are the guiding words of John Quattrocchi, co-founder of WORKOUT ANYTIME. Together with Steve Strickland, John and Steve have drawn from their 40 years of industry knowledge to create a proven, ready-to-run business opportunity for your success.

Proven Formula – The WORKOUT ANYTIME system operates with low-overhead and delivers high customer satisfaction. Our clubs fit into a range of retail spaces, can be run by a tiny staff, and offer the best workout per square foot in the industry. Unprofitable amenities like the pool, spa, courts, aerobics classes, and childcare have been eliminated in favor of a $15 no-commitment price that keeps members onboard month after month after month.

“People join a club to lose weight, build strength and feel better,” explains CEO Steve Strickland. “But eventually, they fall off because of two things: high price and inconvenience. We built a system that offers an unbeatable workout, an inexpensive recurring payment, and 24-7 neighborhood convenience.”

Matrix Equipment – Top equipment is a crucial component of the WORKOUT ANYTIME formula. Steve Strickland’s career experience in both the equipment and club sides of the industry has guided the equipment selection and floor plan. The WORKOUT ANYTIME fitness layout ensures that members never have to wait for the much-desired Matrix treadmills (10+) and cardio gear.

Easy to Get Started – Franchisees usually join WORKOUT ANYTIME with little or no experience in the fitness industry. Some even keep their existing jobs. Yet, our turnkey systems, vendor agreements, equipment sourcing and leasing support make it easy to get started and easy to succeed. Here’s how our ready-to-run approach guides you every step of the way:

Site Selection and Lease Negotiation

– We maintain a network of experienced real estate brokers nationwide who specialize in tenant representation
– Site selection/lease negotiation service offered at no-cost to franchise owner
– In most cases WORKOUT ANYTIME Franchisees receive a generous tenant improve allowance (cash), and up to 6-months free rent per deal
– WORKOUT ANYTIME’s site criteria includes demographics, access, parking, visibility, tenant mix, competition, and the economics of your club

Find out more here. 

“Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Happens Again Today! [Updated 2018-03-02 with Answer Image]

It’s the 15th of the month – and it is time for something that I re-re-started up, just last Month – The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

“Can You Guess Where The Screenshot Below Is From?”

(A Game Screenshot Identification Contest)

Having its’ Fifth Edition now, today – February 15th, 2018!

All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

1. Your guess for the game the image is from.
2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
That’s it!
**[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


The first correct answer submitted by a Skillful Identifier/Gamer will receive this month’s contest prize – which is: a gifted game from the Steam online store!

[Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

Can You Guess Where The Screenshot Below Is From – Contest #1
Can You Guess Where The Screenshot Below Is From – Contest #2
Can You Guess Where The Screenshot Below Is From – Contest #3
Can You Guess Where The Screenshot Below Is From – Contest #4

Are you ready? Here then, is the Screenshot image for this month, below:

[As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

After a week has gone by, if there is no correct guess as to what game the Screenshot is from, I will return here and put up a ‘Hint’ image – a larger portion of the Screenshot – to assist in Game Recognition-ing-ism…

Update!

A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the already-slightly-larger-than-normal CONTEST Screenshot for this month’s Contest)! Ready?

Here is the HINT image (with enlarged portion revealed), below:

[Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is still a portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

Update!
It has been two weeks since the Contest began and there have been no correct submissions! Aww….

To end The Mystery, here is the answer for February’s edition of
‘Can You Guess Where The Screenshot Below Is From’ (2018-02):


The Answer for this month’s Contest was: Just Cause 2!
[Captured in 2014, this Screenshot I took was back when I was playing games at 1600×900 – which is a ‘sweet spot’ I personally recommend [by my own testing] for Mid-Range GPUs (VideoCards). This was JC2 being played with a GTS 250, the ‘Black Knight Edition’ from ASUS which I paired at the time with an AMD X2 245, iirc**. Wow, I have been planning this identification game a long time – never getting around to it for a while of course – haha]
Click to see Full Size
Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Sixth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

See You In The Games!

[**Note: I am not affiliated in any way or degree with NVIDIA or AMD, and I have not and will not receive any compensation of any kind, for mentioning them here. I am merely an enthusiastic user of both companies’ products. I have utilized both and will continue to use both in the future ((on a personal note, I find I usually am ‘stairstepping’ with their GPUs, purchasing from one manufacturer, then the next ‘upgrade’ purchasing from the other, heh. I always Suggest to people who ask; to get whichever has Features you like – and only what you can afford at the time – it will be outdated in 3 years or so anyway; Enjoy what you have and be thankful because there are always people who have less!))]

(The Game Tips And More Blog Contest Game #2018-02)

ROOM SEVEN LEVITATION HOTEL PARIS DESIGN

SEVEN LEVITATION HOTEL PARIS

The Last weekend we were invited to spend a night in the bedroom of SEVEN LEVITATION Hotel Paris … A change of scenery, enchanting, and very pleasant … We’ve tested since the beginning of dozens of hotels – from very luxurious to the simple – but SEVEN Hotel remains one of our fondest memories in terms of wellbeing! We literally left “floating”in this room LEVITATION, amid clouds … Here, the amenities of modern life are available starting with a Nespresso coffee machine with tea and coffee and an iPod docking station to listen to your favorite music in this extraordinary place. You will also find a flat screen TV with 4 channels olfactory delight your senses!

The room of the hotel LEVITATION SEVEN is also a premium bedding, large shower – where you can shower couple – air conditioning, a desk … So comfortable!

Above a photo of the room SUSPENDED BATH offering a superb tub suspended, and below a small photo of the ABSOLUTE LEVITATION!

SEVEN LEVITATION HOTEL PARIS

SEVEN LEVITATION HOTEL PARIS

SEVEN LEVITATION HOTEL PARIS

Teenager’s Room Artist Theme

Teenager’s Room Artist Theme

Teenager’s Room Artist Theme

WORKOUT ANYTIME in Buffalo Grove Patch

WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

24/7 Gym Opens in Buffalo Grove
By: Cristel Mohrman

Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

“We really like this location a lot,” co-owner Eric Nagel said.

(Read More)

My Trip to Bangladesh Cont…..

The assignment is proceeding well, the evaluation questions have been designed and the questionnaire and show cards are prepared and translated in to Bangla. I will be using an “In Depth” interviewing technique. The evaluation itself has 2 aspects to it. Firstly; to looking at the internal mechanisms which either makes them effective or not as the case may be (As an internal service provider) and; secondly, getting conformation from outside the Unit (As an external service provider) to establish if they were effective. The main internal interviews have been conducted and now I have to conduct the external interviews. The external interviews are going to be held in the districts of Dinajpur, Nilphamari and Lalmonirhat. I will have to undertake an 8 hour journey over road to get to Sayedpur where I will be based. Hope to get back to Dhaka on the 15th.

HOME DECORATING WITH ASIAN STYLE

Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

And More: Deal and Sales – Battlefield 4 Expansion, Second Assault is Free from EA – Two Days Left [Notification]

Just a quick mention, for those who didn’t catch it yet or for those who play [or never stopped playing!] Battlefield 4Second Assault, the Expansion pack that adds Four Maps, Five Weapons, Ten Assignments and more, is currently being given away Free from EA/Origin until the 28th – that’s only two days left to go get it!

Battlefield 4: Second Assault Expansion Pack Information Panel
in the “On The House” Section [ Free Games > On The House] in EA’s Origin Game Client (Click to see Full Size)

Note that you need to already own Battlefield 4, as this is an Expansion Pack, but you can still get it now – even if you don’t own BF4 – and play it later. Go and Download it now! GOGOGO

Battlefield 4: Second Assault Expansion Promotional Wallpaper by EA, Unedited
(Click to see Full Size)

See You In The Game!

Quality Test – MSI Afterburner’s MJPEG Implementation (Part I) with Hitman: Absolution (Ultra Settings, 1080p)

Update: Added screenshot example of the RTV1 codec ‘color banding’ issue, with circled areas¹**
Update: Added Quality Test Comparison (Four 1080p samples of Hitman:Absolution) at different Quality Settings²**

Recording with the MJPEG (Motion JPEG) codec, every frame is an independent ‘Keyframe ‘or ‘I-Frame’ (short for “Information Frame”), which means it is a type of frame that can be ‘cut’ or started from in video editing programs (technically, every frame is a JPG picture!). This also allows for faster seeking and rendering in editing applications. MJPEG also requires less overhead (better performance/less ‘lag’ while recording) than many codecs. As well, the audio captured is PCM (“Uncompressed”) with MSI’s Afterburner, which means that any video editor should be able to recognize the sound data. Errors in programs like Virtualdub saying “Error initializing audio stream decompression” or Sony’s Vegas showing “Stream attributes could not be determined” will not occur and these will open the audio without associated problems.

Testing out MSI’s Afterburner as a game recorder and using the built-in MJPEG codec that comes with the program, I fired up some Hitman: Absolution, turned up everything to Ultra, captured some clips and put them together, uploaded it to YouTube, and collected some results with everyone:

This video compilation is a test of a few things:
1) Hitman: Absolution’s performance while maxed out (Ultra Settings in game Options)
2) Capture quality of MSI Afterburner and performance/lag of using it
3) H.264/AVC compression quality maintainability
4) Youtube’s quality maintainability

Recorded with:
MSI Afterburner
– v.2.3.0
– MJPEG codec, “Full Frame”, 80% quality, 30fps
– Audio automatically records into PCM (“Uncompressed”) format

Recorded Game: 
Hitman: Absolution @ 1920×1080 (1080p)
– “Ultra” settings (Preset)
– Anisotropic Filtering set to 4xAA
– “Texture Filtering Quality” set to High Quality (i.e.Off/NoFiltering) in Control Center

– “Morphological” Anti-Aliasing (MLAA) setting (AMD/ATi) set to ON
– “Surface Format Optimization” set to OFF in Control Center (AMD/ATi)

Framerate while not recording: ~31-79fps
Framerate while recording: ~28-64fps

I chose some Hitman: Absolution clips for a Quality Test because it was a good example of a recent game (at the time of this writing) that includes both fast movement/action areas on the screen, as well as slow/non-moving parts, including text. It has lots of dark and light areas, high contrast edges, particles (rain/filmgrain/sparks,etc) and tests area panning as well.
I was impressed with MSI Afterburner and it’s utilization of the MJPEG codec overall. It seems to be slightly optimized or tweaked somewhat. At 80% Quality (to be in the realm of comparison with Bandicam’s MJPEG Preset Default of ‘Quality80’), flatter/darker parts were not overly compressed – which would create excessive macroblocking and/or be too smoothed out, normally. This could be partially due to the ‘Film Grain’ effect within the game, however (seen mainly when the sky or a flat-coloured background is in view).
In other words, there was very little Gibbs Effects aka ‘Ringing’ (“mosquito noise”) around elements such as text when onscreen, and what effects were there, were ‘hidden’ somewhat by the grain effect. You had to look closely to see it, which is still pretty good for not recording in a 100% Quality setting – but again, the ‘Film Grain’ effect in this game is contributing to this ‘negative effect of the MJPEG codec’ not being as visible.

A small amount of Gibbs Effects/Mosquito Noise/Ringing can be seen around and within the UPC symbol  from this frame taken out of the original MJPEG recording. It is about as visible and even seems to be less so in the video itself, due to the “Film Grain” effect present in the game helping to hide it. Click to see Full Size

The very small amount of color banding present in the original recording was somewhat generated by the Game Engine and there is very little of it (what does occur is hidden somewhat with the film grain effect the game has).
In the recorded output, thankfully there is very little, partially because of a higher-quality setting when used and how MJPEG codec handles color dithering; color banding usually won’t be seen very much at higher bitrate/quality settings (which means low compression), but will be easily seen at lower bitrate/quality settings (which uses higher compression).
Keeping above 80% quality when recording with the MJPEG codec [I recommend recording at 90% if your system can handle it, as most games do not have the Film Grain effect present in Absolution to help hide compression artifacts, such as color banding, flat color/area macroblocks and Gibbs Effects] if you have the space, it should leave you satisfied with easily-editable captures.

²**Quality Test Comparison – Four examples of various Quality Settings (90%, 70%, 50% and 30%) when using MSI Afterburner’s MJPEG Codec in Hitman: Absolution. The differences are most apparent in the middle section, the bricks that the police officer is standing on, and the people milling around to the left of the gazebo, both areas showing colour loss (Posterization) and detail loss (Quantization), more obvious in the 30% sample (bottom). All sources were original output frame extractions from 1080p recordings.
Click to see Full size

[A quick note here that MSI Afterburner’s output/recording seems to be somewhat darker than other game recording programs. It even states this in it’s own Options, “captured video may appear darker than you see it while gaming” and offers a checkbox that will apply Gamma Correction. Since this article is more about MSI’s MJPEG optimization and utilization (performance and ability to maintain visible quality), this ‘darker recording’ will be explored further in a future Game Recorder Comparison article]

For people trying out any game recording software and finding your recordings are choppy/laggy on playback (that is, when you are looking at the generated/recorded file), you should find that if you use a player/viewer that has Acceleration (GPU, videocard, DirectX processing), it should play back much more smoothly. If your system does not have this option, you can also try converting what is captured to another file temporarily, one with a smaller bitrate/size, and you should then find it will play back that converted file just fine (especially when recording with lossless/high-bitrate codecs).



It was interesting to do some side recording with Afterburner’s included RTV1 codec as well*
The Riva Tuner Video codec is an iteration related to older codecs such as Indeo Video and S3TC compression techniques. It is similar to MJPEG and it seems to have very little effect on performance while recording – even performing slightly better than MJPEG at times, which was a nice surprise. Unfortunately, it suffers from ‘color banding’ (Color Quantization/Posterization) and the result is apparent lower quality, even at high bitrate/quality settings. Although it may not be as obvious in the below comparisons (depending on the settings of your monitor/colors/brightness), and while it certainly does not ‘destroy the quality overall’ in the game recording, in the captured video the color banding can be very distracting, especially when it includes motion through the color and light changes in an area as you move through it [it may not be to everyone, of course]. The size of the file produced is quite a bit larger than when recording with the MJPEG codec as well, but more on that in a future article..

*As this article is mainly a Test of Afterburner’s usage of the MJPEG codec, a future Game Recorder Comparison article will include the RTV1 codec found in MSI’s Afterburner and cover it in more detail than here

¹**An example of the RTV1 codec’s problem with Color Quantization (‘color banding’). This frame is extracted directly from a 100% Quality RTV1 codec recording (Batman: Arkham City Benchmark @ 1080p). The areas that contain the most obvious color banding problem have been highlighted with green circles.

If you are having problems with Color Banding that is not in the game itself, try to use a higher-bitrate setting (higher quality) for the codec you are recording with, resulting in lower compression and lowered loss of details, if you can do so.
[With the RTV1 codec, it appears that it will still remain a little, no matter what…]


Getting back to MJPEG testing with Afterburner, framerate was maintained close to non-recording performance (at ~30-60+fps for this game) when recording. I usually used MSI’s Afterburner only as a monitor/controller for the videocards installed and captured with another program such as FRAPS or Bandicam. Using MSI Afterburner alone and having to run one less application in the background to capture no doubt had at least some sort of streamlining affect on performance. It felt that way, slightly.

Clear, crisp textures can be seen in this frame taken from the original MJPEG capture.
MSI’s Afterburner and it’s utilization of the MJPEG codec seems to be even slightly superior to Bandicam’s implementation of it. [Hmm..something that must soon be tested!]
Click to see Full Size

The Average bitrate of the original MJPEG captures was about 30Mbps up to 70Mbps, which meant a writing stream to the disk of up to 8MB/s, which almost any hard drive can handle (recorded onto a drive capable of 150MB/s at the time).
The original generated recording files were about twice the bitrate and size of the final MPEG-4 compressed file uploaded to YouTube, the final file weighing in at about 600MB with a bitstream of 25Mbps on average (it is assumed that almost everyone will compress recorded material into a final output video compilation file of 8-20Mbps or so, for uploading to YouTube/Vimeo/etc (Blu-Ray’s standard bitrate is 36Mbps and most video editing application presets go up to 20Mbps by default).
This final utilized bitrate, with the efficiency of H.264/AVC, manages to keep most of the detail that was in the original MJPEG recordings, although sadly, most of the finer detail is lost after uploading, as can be seen in the screenshot comparison below:

Originally used in an earlier article testing out MJPEG on Diablo3 with Bandicam, this screenshot shows examples of the detail loss after uploading to YouTube, when the video is played back at 1080p and 720p. Click to see Full Size 

What was more disappointing was that YouTube feels the need to overly re-compress uploads. Much of the quality is lost, especially things like the film grain, one of the ‘first things to go’ in temporal video recompression. For instance, at 1:03-1:08 there is visible grain effect maintained in the settings I chose for the final compressed output file, keeping most of the grain from the original MJPEG recording from Afterburner. In the YouTube Video Player after uploading, it can be seen that much of that grain is lost. Another example of this is the dense cornfield against the much flatter sky textures at 1:30-1:36. I kept the complexity of the cornstalks and hard contrasts of the plant details versus the sky on purpose, yet after YouTube’s recompressing of the video, the result is blurred and smoothed details that were not like that in the recorded MJPEG video or the final H.264/AVC high-quality video output/final compress. I will attempt other uploads of the data at various settings for experimentation and put it just below this paragraph when an upload does not lose much of the finer details I wish to share**. I understand they must do it to save space (no doubt people upload huge, ‘FRAPS-original’ size files and recordings sometimes), it is merely unfortunate. At least it then becomes an example of what happens to some of the quality and detail once uploaded to YouTube (the extracted frame above, for example, is from the original MJPEG recording produced by Afterburner). There seems to be no use, at this time, to attempt to upload extremely high quality/fine detail. 

 The file originally uploaded to YouTube, the results of the MSI/MJPEG Quality Test, was previously compressed with a bitrate of 25Mbps. While this bitrate, using high-quality H.264/AVC codec settings, was enough to maintain details such as Film Grain and high contrast edges, much of this detail was lost after YouTube recompressed the uploaded file. 

**Another, higher-bitrate excerpt [in an attempt to compensate for YouTube’s recompression] of the original MSI/MJPEG video capture:

This video then, is an attempt to compensate for YouTube’s recompression and data loss, by uploading a video stream with a very high bitrate (an average of 60Mbps, up to 80Mbps, higher even than the original recorded data). As such, the duration is much smaller, a mere excerpt of the original intended upload.

Result: Even when a video stream is uploaded with the much higher bitrate, even when the original captured file is uploaded, even when I rendered the capture to a 2160p (4K UltraHD) file and uploaded that to YouTube, YouTube’s recompression of the uploaded material (while still watchable) loses far too much detail from the actual upload – at least for high-detail evaluation of a game recorder’s produced video streams. This is unfortunate. For now then, I will try to always show frames (screenshots) extracted from the original captured files created by game recording applications in Quality Tests…

Turning up the Recording Quality setting to 100%, the bitrate for MJPEG jumps up to over 275Mbps (over 30MB a second of file size being written to the drive). Quite a jump – and at that bitrate, the size becomes comparable to a YUV codec (or a FRAPS 1080p half-size recording) easily – but the quality ramps up as well. Color dithering and loss of detail is surprisingly near-negligible at 100% Quality with this game, yet the resource demand for using the MJPEG codec [especially MSI’s optimization of it] seems to remain small, as MJPEG was already a lightweight codec with somewhat smaller processing being done, to begin with. Today’s powerful videocards and CPU’s should be capable of pumping out a sequence of lightly compressed JPEG’s in a single file [no pun intended] without breaking a sweat. As long as your system isn’t chugging along already, adding some MJPEG capturing shouldn’t affect it very much. For those of you with slightly older systems with trouble recording in other codecs, give MJPEG a try, it should record smoother for you.

Overall, well done MSI.  /clap

If anyone is looking for a completely free Game Recording program (it might have even come on a disc with your videocard, as mine did) look no further than MSI’s Afterburner. Keeping the settings relatively high [especially with the MJPEG codec, to keep compression artifacts low] and/or doing your own tests to see what looks ‘good enough’ for you, I suspect many people will be happy (if you aren’t already) with using Afterburner and the low-resource-demanding and editing-friendly MJPEG codec to record your gaming adventures.

Please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – do a few short tests and use what you prefer.

Have fun recording with MSI Afterburner and the MJPEG codec – and See you in the games!




[Note: As noted throughout this article, this testing of MJPEG with Hitman:Absolution alone is not a full test of MJPEG quality maintenance potential, as this game utilizes a “Film Grain” effect, which hides some of MJPEG’s weaknesses in maintaining Quality. In a future post (Part II), a more in-depth examination of MJPEG as a video game recording codec, using other games and utilities, will be actualized. See you then!]

Tom Monaghan, founder of Dominos Pizza, and car collector had a lot of cars in his world

The first Domino’s “Javelin” official delivery vehicle being delivered to Tom Monaghan in 1969.

When Monaghan only had a few stores, he had red, white, and blue AMC Javelins for delivery cars.

When he and his brother started out in pizza delivery, they had a beat up ’59 VW bug, and when his brother wanted out of the company/business/partnership… he got the car as a settlement

His dad died when Tom was four, and his mom put the boys into foster homes that didn’t work out, then into a catholic nun orphanage. After 6 years she got her life together and thought she’d be able to care for her sons and found out, she wasn’t parent material, then committed the boys to juvie.

In his teens, Monaghan had been a penniless car buff; then he joined the Marines, went into pizza after his discharge and dropping out of college, acquired a fleet of automobiles, including a handmade Bugatti Royale, the Type 41 1931 Bugatti Royale Berline De Voyage, and the Packard that conveyed F.D.R. to his second inauguration.

Because he liked to fly, and get to meetings about franchisees faster, he bought a Gulfstream jet and a Sikorsky S-76 helicopter.

He had at least 3 annual antique engine shows on Domino Farms, the event featured eighty-six exhibitors of steam and gas engines, related paraphernalia and other contraptions. Also featured were classic cars from the Domino’s Pizza collection, two steam launches including the Olde English ‘D’ owned by Domino’s and a steam powered boat called Steamer Telegraph, owned by the show’s chairman, Jim Monaghan.

 When his pizza franchises took off, he built a 244-car collection, bought the Detroit Tigers, and became the owner of the largest Frank Lloyd Wright collection in the world. He was worth 480 million.

Eventually, he decided to sell everything. He got rid of his cars, yachts, planes, and baseball team, and in 1999, he sold Domino’s to Bain Capital.

one of the cars in his collection was the Barris AMX 400

another was a Model J Duesenberg he bought for a flat million

http://www.hotrod.com/articles/ccrp-0705-amc-amx/
http://mentalfloss.com/article/65604/11-facts-about-dominos-pizza-founder-tom-monaghan-30-minutes-or-less
https://www.newyorker.com/magazine/2007/02/19/the-deliverer
http://people.com/archive/tom-monaghan-vol-32-no-13/
https://www.nytimes.com/1999/02/14/business/taking-the-gospel-to-the-rich.html
https://www.hemmings.com/blog/2011/03/20/sia-flashback-million-dollar-duesy-harrahs-auctions-over-300-cars/
https://www.farmcollector.com/steam-traction/dominos-farms-sponsors-third-annual-steam-engine-show

And More: The EULA Keeps Popping Up When Starting Sony’s Vegas Video Editing Applications (FIX)

Since the most popular answer on the ongoing poll I have running here at the blog (“what type of posts would you like to see more of in 2014” [top right, it will run until the middle of the year]) is “Tips And Tricks Of Video Capturing And Editing”, I thought I would start more of these types of requested posts by sharing this fix for a problem that seems to pop up intermittently with Sony’s Vegas line of products.

Whether you have just re-installed it or whether it has been on your system for a while, ‘something’ is causing the EULA (End User License Agreement) to pop up and require you to agree to it, even if you have already done so and/or Registered the program. This question comes up once in a while on the Sony Creative Software Official Forums and I have seen it elsewhere. I was recently reminded of it again because it is also something that just happened to me on my system! I didn’t re-install Vegas or make any large changes related to Vegas, yet this little guy started popping-up every time I started up Vegas Movie Studio HD**:

The popup that comes up for some people, every time they start Vegas

The fix is a simple one, originally suggested by a Sony Forum Moderator and quoted/forwarded frequently on the official forums, to those who come and ask the question there. Although it seems more like a ‘workaround’ than a ‘fix [in my opinion], it works just fine and since it is officially supported by Sony and I just tested it for verification myself [that it does indeed solve the problem], so now I share it here with you:

  • To stop the EULA popping up every time you start Sony Vegas, simply open Windows Explorer and navigate to the folder where you installed it on your system. 
  • Then, find the file that is titled, simply, “eula”. There will be no Extension showing, even if you have the Windows option to ‘Hide Extensions For Known File Types’ turned off. 
  • Rename (or delete) the file. That’s it! 

Now the EULA cannot pop up anymore and won’t, every time you start up Vegas to edit your game captures.

**Although this example shows steps for the Movie Studio version of Sony’s Vegas Video editing line, the EULA ‘fix’ is the same steps for Vegas Pro, Vegas Edit or other versions of Vegas

Enjoy popup-free video editing once again – and See You In The Games!

Hello, 2015!

Another year is in the books, and as always, I’m excited to be seeing the start of a new year. Last year will be remembered for its big highs and deep lows, but I know that everything happens for a reason, and I feel like I’m in a good place to start 2015.

And one place I plan to start is being a better blogger! So here’s my Currently post for January 2015.

Listening – It’s my daughter’s bedtime here, and my husband has bedtime duty tonight. It’s a rare moment when the TV is off, the dogs are asleep, and all is quiet in the house. I’m savoring it.

Loving – I think that New Year’s Day may be my favorite day of the year because it is a fresh start where it feels like anything is possible. I often feel this way at the beginning of the school year, too, but I think I prefer this time of year because there’s more predictability with everything. I already know my students very well; we’ve built our routines and expectations, and the only things that need to be changed are the things I *want* to change. It’s an empowering holiday.

Thinking – A major reason why I haven’t been blogging much lately is because of my Ph.D. program. It feels weird to be writing something that doesn’t have a lengthy bibliography attached to it! I continue to be excited about my dissertation topic, though, and I’ve been thinking about it more and more. I plan to write about the role of social media in teacher professional learning. The short version is that I’m going to study how reading and writing about classroom practices through blogging affects teachers’ feelings of effectiveness in the classroom (self-efficacy beliefs). I think connecting with other teachers through blogging and other social media has been one of the best moves I’ve ever made as a teacher, and I’m curious to find out if others feel the same way and what consequences it might have. One of my classes this semester is actually requiring me to blog about my research, so I’ll be setting that up in the next week. It will be a separate blog as I doubt my classmates in other programs will really want to read about Eberopolis, but I’ll share a link here if you’re interested in following or learning more.

Wanting – I had 18 blog posts in 2014. Pathetic. I have a notebook full of ideas, so now I need to get them out here. My goal is to blog at least once a week, and as I’ve been getting other things in my life better organized, I think that’s realistic.

Needing – I set some big goals for this vacation as far as getting myself organized for the new year, and so far, I’ve done a great job. For example, I already have 2 months of healthy meals planned for my family (written on sticky notes so I can shuffle them around when stuff inevitably comes up).

And I’ve been cleaning closets and creating a new workspace to boost my productivity in the new year. I even made my annual pilgrimage to The Container Store today! I just need to wrap up my remaining projects tomorrow so I can enjoy my weekend before returning to school on Monday. (I’m @eberopolis on Instagram if you want to see more about those projects…). 
Finally, my three areas:
YES to my health. I lost nearly 20 pounds between Labor Day and Christmas, and while my trip to see my family for the holidays reversed that trend a little, I’d like to continue to focus on my health in 2015. I’ve been doing Weight Watchers, and losing weight has been easy when I’ve taken the time to plan what I’m going to eat and track what I eat throughout the day. I’m ready to get back on track.
Maybe to becoming a morning person. I already get to work by 7:15 each morning, but I would hardly call myself a morning person. I read The Miracle Morning by Hal Elrod over break, and it has me thinking about whether I should try to get up earlier to add things like meditation and exercise to my morning routines. I’m thinking I’ll try it for a month and see how it goes. (The book was good, btw. An easy read to be sure). 
I wish…I love my job–I really do–but I’m starting to feel like it’s time for me to tackle a new challenge. I want to be able to work with other teachers to help them troubleshoot issues in their classrooms, improve their teaching, and use technology more effectively. I purposefully chose to go into an Educational Leadership PhD program for that reason; ultimately I want to teach in higher ed and/or become an administrator. I’m not ready to do all of that yet, but I wish that I could find an instructional coaching position or something similar that would let me work more directly with teachers while I keep working on my program. It might be time to start that hunt this year. 
Okay, I promise I will be back soon…I have a couple of other posts in draft mode almost ready to share about some of the new things I’ve been doing in my classroom this year. Hopefully you’ll FLIP when you read them! 😉
Happy new year!

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

Good ideas that we can see these concrete houses the Netherlands have been totally inspired and inspiring call to us to try. Most of the ideas that we can see the space was not available outside of this house. concrete material, which come from the use of brick and stone was looking for a huge ornate and extraordinary. We can try to come to our ideas to make this house looking for a pleasant as well as ourselves and our families.

The concept of an interior provides ample room to combine the ideas. Integration space that stands between the living room, dining room and kitchen area is desirable for those who like social live and love to watch their children. These applications are rustic room in search of other great ideas that make us who see this house completely. The decorations of great gold bathroom also feel comfortable. Honestly, the more attractive space in this house was the place of these decorations ideas outdoor dining. Designed by Arjen Reas

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

See You In The Games!

WORKOUT ANYTIME on Entrepreneur

WORKOUT ANYTIME on Entrepreneur

WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

You can view the full article here. 

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME VP of Development Randy Trotter was recently featured in the Albuquerque Business First. The article begins with information about WORKOUT ANYTIME and why Albuquerque is ripe for the concept to enter the market and grow. Randy is quoted about the franchise opportunity and they provide information about financing needed to open a location. The article goes on to touch on the real estate footprint. The article is ended by providing Randy’s cell phone number for anyone interested in a franchise.
You can view the full article here.
 

Choose Your Poisons

Food additives vary tremendously in character, from diethylstilbestrol (DES), a synthetic female hormone used to stimulate cattle growth by 15 percent and boost efficiency of feed by 12 percent, to butylated hydroxyanisole (BHA), an antioxidant used to retard or prevent rancidity and flavor deterioration. Then there is glycerol monostearate, an emulsifying agent derived from partial decomposition of fats, which is used in making ice cream, and a wide variety of artificial coloring compounds (there are now thirty-three permitted in Britain, only nineteen in the EEC, ten in the U.S., and four in the U.S.S.R.). Much of our animal food is laced with antibiotics, which are given to retard meat spoilage. They are also used to suppress evidence of disease in animals that are raised in adverse circumstances and are, therefore, prone to illness. They offer no nutritional benefits.

There are three main ways that food additives can be threats to health: they can be carcinogenic (tending to produce cancer), teratogenic (tending to harm the unborn child in the womb), and mutagenic (tending to produce changes in the gene pattern which can be passed on to future generations). One can add the danger of producing genetic changes in the cell material which promote early aging in the body—of particular concern to a woman intent on preserving her youthfulness and good looks.

Diet Start

Government agencies try to regulate the safety of additives in fabricated foods, but judging from the Canadian and American records of failure and the number of permitted additives that have in recent years been suddenly whisked off the market, this is an impossible task. Only 60 percent of the additives used in Britain have been tested at all and even then only for acute toxicity—that is, to determine whether or not they bring immediate adverse reactions to an organism ingesting them—not for teratogenicity nor for possible genetic effects. In fact, there is simply no way for them to be tested. The tests that are done are carried out on animals, not humans, and as the thalidomide tragedy showed, a substance can appear quite safe from teratogenic effects in laboratory animals, yet result in tragic consequences for a human fetus.

But even our methods of testing are outdated. According to Ross Flume Hall, this is because we have all our assumptions wrong. “Both the standards of nutrition by which these foods are judged and the methods of toxicology used to determine their safety are outmoded nineteenth- century models,” he says. Nineteenth-century nutritional theory is based on the notion that all we need from food is protein, carbohydrates, fat, vitamins, and minerals regardless of their source. It is unaware of the interrelationships in natural foods, and of the implications of possible nutrients as yet undiscovered (as with fiber until fifteen years ago) which may be vital for good health. “This limited concept of what constitutes nourishment persists,” says Hall, “even though it has been completely outmoded by the enormous advances in understanding of cell and molecular biology.”

The nineteenth-century toxicology still practiced today assumes that each chemical tested has its own level of toxicity. As long as one’s consumption of that chemical remains below that level, it says, one is safe. It gives no consideration to how different chemicals, tested separately, affect an organism when they are consumed together; nor is any thought given to the cumulative effects of taking a substance regularly over the years.

“What we are beginning to realize,” says Hall, “is that not only can chemicals poison in the short term, they can also cause long-term subtle and undetected changes in personal biology. These changes can show themselves in devastating ways such as cancer and other degenerative diseases and birth defects.”

Food additives are not the only problems with convenience foods either. Their simple nutritional worth is highly questionable. For in addition to their lack of fiber (natural fiber is largely removed in the manufacture of convenience foods), government surveys in Canada and the United States—where 80 percent of food eaten is now factory-produced —show that in spite of the great wealth of these countries and the availability to the public of a vast variety of foods, in general people are not getting enough vitamins and minerals in their diet. This is in large part because so many of the nutrients are lost in processing.

Researchers at Rutgers University experimented with frozen chicken pies to see what vitamin loss, if any, had taken place in the processing. They chose vitamin C levels. To their amazement, researchers found no vitamin C whatever in commercially prepared frozen pies. Then they added vitamin C to the pies and refroze them. When they were reheated two days later, three quarters of the vitamin had disappeared.

A random sampling of 6.5 million elderly people in Britain, in an investigation sponsored by the Ministry of Health, revealed that four out of five were suffering from vitamin deficiencies—a factor that is probably responsible for a large number of illnesses, including many mental disorders suffered by the elderly. According to Dr. Geoffrey Taylor, who has made a long study of the problem in Britain, “There is every reason to believe these deficiencies are present in other age groups of the population as well.”

These are a few of the reasons why the Lifestyle Diet does not include convenience foods. For lasting health and beauty you need the very best complement of nutrients you can get. The McCarrison Society, an organization of doctors and dentists in Britain dedicated to the study of the relationship between nutrition and health, issued a directive that expresses it very well: “Food should be left as close as possible to its natural state. It should be grown on healthy soil. Stored, canned, packaged or precooked food should, whenever possible, be replaced by fresh food. The protective value of a wide range of fresh vegetables, fruits, and low-fat dairy produce is particularly important. Cereal carbohydrates should not be refined and sugar consumption should be at an absolute minimum.” These are the basic principles of the Lifestyle Diet. Now let’s see how to put it all into practice.

Easy or Hard to Digest

The faster your body can digest a carbohydrate, the higher its dieting index value. There are two major types of digestible polysaccharides or complex carbohydrates: amylose and amylopectin. Both contain many glucose units, but the foods with more amylopectin raise the blood glucose levels much more readily than foods containing more amylose. The branches in amylopectin starch have many surface areas, which make it easier for digestive enzymes to break it down faster.

Diet Start

These easy-to-break-down starches include foods such as most breads, white potatoes, white flour, and snack foods such as pretzels, donuts, and cookies. Most of these foods are also processed or refined carbohydrates, but some natural unprocessed carbohydrates have higher amylopectin levels, including parsnips, russet potatoes, and rutabagas.

Starches that contain more amylose include some whole grains and legumes (lentils, dried peas, and beans) and some of the starchy vegetables such as yams and sweet potatoes. These foods are best for your dieting index weight-loss program.

Dietary Fiber

Most dietary fiber is not digestible. In other words, you might consume the fiber, but there’s a good chance most of it will not be digested such that the nutrients enter your bloodstream. Instead, the fiber is excreted in your stool. There are two major types of fiber: soluble and insoluble. Mostly it is the insoluble fiber that does not get digested, but both types of fiber slow the rate of carbohydrate breakdown into blood glucose. Because of this, it’s great for you to eat lots of dietary fiber. Ideally, you should consume 25 grams or more every day.

Don’t overdo the fiber. But you’d need to consume a virtually unpalatable amount of fiber supplements, such as psyllium husks, to eat too much fiber—such as 4 or 5 tablespoons a day. With too much fiber, you could actually block the absorption of important vitamins, minerals, amino acids, and more. Overeating fiber can, in essence, make you undernourished. (And undernourished doesn’t equate to being thinner.) More than 45 grams of fiber a day is generally too much for most of us.

Popcorn Cart, Warren, Ohio, circa early 1910s

https://www.facebook.com/neatoldphotos.m.lucas2/photos/a.400823796751664.1073741829.400758923424818/908779272622778/?type=3

High-quality protein

Our bodies are composed mainly of protein, which (after water) is the most abundant substance in the body. It is the major constituent of our muscles, tissues, skin, hormones, enzymes, antibodies and blood. Even after childhood protein plays a vital role in maintaining and rebuilding our bodies as they cope with the wear and tear of daily life.

Proteins are broken down by the process of digestion into units called amino acids, and the body requires 22 amino acids to form human protein. All but nine can be produced in the body. These nine are known as ‘essential amino acids‘ and have to be provided in the diet. Foods that contain all nine are termed ‘complete proteins’, and they include meat, fish, dairy and soya protein. Fruit, vegetables, grains and pulses are ‘incomplete proteins’ and have to be carefully combined to provide sufficient amino acids in the diet.

Diet Start

Protein is fundamental to rebalancing blood-sugar levels, because it encourages production of the hormone glucagon, which helps the body to release stored glycogen for energy and encourages the burning of fat. Glucagon also helps to balance excess insulin production.

What is Biological Value?

In order to be efficient, protein foods have to be of a high quality and have what is termed a high Biological Value (BV) — this indicates how much of theprotein is retained by the body. Eggs used to be classed as having the highest BY, but micro-filtered whey, whey-peptide blends and lactalbumin (whey- protein concentrate) are even higher. Micro-filtered whey protein used to be a useless by-product of cheese manufacturing. Now it is processed at very lowtemperatures and turned into a protein source with a very high BV that contains all essential and non-essential amino acids.

The only whey to go

To maintain a healthy immune system, blood, skin and muscles, you need to consume protein with a high By. Whey protein (which is derived from milk, see Q&A opposite) is an excellent supplement that has long been used by bodybuilders and athletes alike. It has many uses in a dietary regime:

¨ It encourages the formation of lean muscle mass

¨ It increases glutathione levels, which has great antioxidant and immune- boosting properties

¨ It helps to build healthy new collagen

¨ It provides an invaluable source of protein for vegetarians who are attempting to balance their diets

¨ It is a quick and easy way of having a high-protein meal or snack

¨ It can be incorporated into recipes as a replacement for carbohydrate ingredients.

There are a multitude of whey products on the market — some better than others. Many come in sweet flavours, which are great when making shakes and smoothies, but you need to source natural, unflavoured products if you want to incorporate whey-protein powder into savoury dishes such as soups. These are widely available through health-food stores and on the Web. Just make sure you don’t confuse them with slimmer’s meal-replacement powders, which are usually laden with carbohydrates.

The average serving of whey protein is a 25g (1 oz) scoop, but check on the label to see how much of that scoop comprises protein: the lower the protein content, the higher the carbohydrate content. And beware of `blends’: these are likely to be bulked up with milk and soya derivatives. To get the best out of your whey products, go for the highest protein concentration possible.

Happy New Year from The Game Tips And More Blog! [NewYears’ Greetings 2017]

“Happy New Year 2017 Greetings”
by The Game Tips And More Blog
(Just Cause 3 capture, Highest Settings and FXAA, with Text and Effects added)

I personally wish you all much better things in 2017!

[To help celebrate the end of a crazy 2016 (for almost everybody, it seems) and the beginning of a hopefully-better 2017, this was simply a fireworks celebration captured in Just Cause 3 (Highest Settings, FXAA). I then added a ‘crowd’ overlay that had a bit of ‘glitter’ effects in it (used with License from CyberLink’s PowerDirector 12) and put some Just Cause 3 – styled text  on top of it all (using a free font called “Dirty Old Town” which looked somewhat like the JC3 font and another one whose name escapes me at the moment). Lastly, I put a “Text FX” Overlay effect to show the year, an effect that was also in PowerDirector 12. As always, it was seemingly simple to think of, but took longer than expected to complete the composition (almost a day late for NewYear’s, heh). 
HAPPY NEW YEAR ! ]

Game Material by Avalanche Game Studios (avalanchestudios.com) and Square Enix (square-enix.com)
Captured and Edited by Troy from The Game Tips And More Blog

The Easiest Way to Implement a Classroom Economy

As my life continues to get crazier, I am constantly looking for ways to simplify and improve the things that I do. This year, for example, I decided to merge Class Dojo with my classroom economy, and so far, it’s going very well! Here are some of the tweaks I made to make this merger work.

My Classroom Economy

I’ve been using a classroom economy since I started teaching, and every year, I make a few tweaks. The basic idea is that every student applies for a class job at the beginning of each term (our terms are 6 weeks long). I’ve previously posted about my classroom jobs here. I display the jobs in my classroom so that we’re constantly reminded who is responsible for what. This year, I’ve used a pocket chart for my classroom jobs (sorry for the blurry photo).

I used to give students $100/week as their salary, or about $20 per day. They’d have weekly and monthly expenses, and then they could use any remaining money to purchase items in our class store. The complete program is detailed in my Classroom Economy Megapack on TpT.

I love the system, but I felt like I wasn’t as consistent as I wanted to be in tracking student behaviors to give fines or bonuses, and there were many Friday afternoons when I was so involved in whatever we were working on that day, that I just didn’t leave enough time for them to shop. 
Meanwhile, I was dabbling with Class Dojo, and I wanted to figure out a way to tie that in as well. If you’re not already familiar, Class Dojo is an online behavior management system that allows you to give and take away points from students. You can create your own categories for points, and you can access the class info from any device — laptop, computer, iPad, iPhone, etc. I liked that portability because I always have one of those devices in my hands, and I could give or take away points without really interrupting what I was doing. 
The solution came for me this year when Class Dojo allowed for the creation of weighted point values! Before, you could only give or take away a single point at a time. Now you can create points on a scale of 1-5 and weight particular behaviors accordingly. This is done in the set-up for behaviors. 
1. Go to Edit Class on your class screen and select “Edit students and behaviors.”


2. Select “Behaviors” and either click on one of the exiting behaviors, or the plus symbol to customize the behaviors.


3. Change the icon (optional), name or rename the behavior, and then click the box to access a pull down menu of point values to weight that item.

And that’s it! You can weight both the positive and negative behaviors according to your needs. Here are the settings I have now for my classroom economy.

I basically divided the $100 weekly salary by 10, and scaled everything else back the same way. Students now get 2 points daily for their salary (10 points per week) and bonuses for different behaviors. The only other positive behavior that I’ve weighted more currently is helping others because I’m really trying to encourage that in my classroom. I’m also going to add a +4 for a class compliment because I like when they do a good job with other adults in the building.

For negative behaviors, I deduct more points for breaking rules outside of my classroom and for disrespecting people or materials. I also now deduct their taxes and rent through Class Dojo, and when they shop, I deduct their points in here. I price everything in multiples of 2, but then I found that I wanted a -5 shopping once they had enough points for some of the larger ticket items in our class store. I dislike that it shows up in the “Needs Work” tab, but I don’t think it’s a problem overall. The parents know what is happening from the descriptors, and we just talk about it in class from the stance of making or spending money. It’s the easiest way to deduct some points without resetting the points entirely.

Since transitioning to this modified system 7 weeks ago, my classroom economy has become more accurate and effective in a fraction of the instructional time. Class Dojo has replaced the clip chart that I used to use, and it helps with some of the accounting. I’m still using the bulk of the resources from my Classroom Economy Megapack, however.

If you’re interested in trying out Class Dojo with the rest of my Classroom Economy Megapack, I’ll be offering the product on sale at half price through Tuesday. It is one of my best sellers, and if you’re looking to change up your classroom management routines or enhance your existing classroom economy, I don’t think you’ll be disappointed. I’ve also discounted the rest of my TpT store 20% to celebrate my return to blogging after a busy start to the school year. Those sale prices will go now through Tuesday, so check them out!

Join the Mailing List! 

Did you know that I have a mailing list so that you’ll never have to miss a post? Use the link at the top right of this page (under Never Miss a Post) to subscribe to my mailing list. You’ll get my posts delivered to your inbox, and you’ll also get access to some extra resources that I’ll be offering to my mailing list only. Given that my PhD work has really cut in to my blogging time this past year, the mailing list is the best way to make sure you see my new content. I promise not to spam you or share your contact information ever. 
Have a great week!

Atlanta Blogger Meet Up

Yesterday, I had the privilege of meeting some fantastic teacher-bloggers as part of the Atlanta Blogger Meet-Up.

If you ever get a chance to meet up with other teacher-bloggers, I’d highly recommend doing it! It was wonderful to meet so many sweet and enthusiastic teachers who share similar interests, and now I can finally match names and faces with the blogs that I read all the time.

We met at the Swan Coach House in Atlanta for brunch, and it was wonderful. Amanda from Collaboration Cuties made us each a placemat with everyone’s name on it.

And Stacia (the other half of Collaboration Cuties) made us name tags.

Jivey from Ideas by Jivey made us a little goodie jar filled with treats of both the sugary and teachery kinds.
And Elizabeth (Fun in Room 4B) and Brandee (Creating Lifelong Learners) made us this adorable to do list that is dry erase. 
There were 9 of us in all, and I’m so glad that I went. I’m typically a really shy person, but it felt like I was getting together with old friends! I’m so grateful to be a part of the teacher blogger community, and I love learning from other teachers. This group in particular has so much to offer, and if you don’t already follow each of these bloggers, you’re definitely missing out.
From left to right:
Amanda – Teacher at the Wheel
Jivey – Ideas by Jivey
Brandee – Creating Lifelong Learners
Denay – The Gemini Teacher
Liz – Polka Dot Firsties
Stacia & Amanda – Collaboration Cuties
Me!
Elizabeth – Fun in Room 4B
If you missed out on the meet up, no worries — I have confidence that this will become an annual tradition. And for those of you who are interested in classroom technology, the International Society for Technology in Education (ISTE) is holding its annual conference in Atlanta next summer on June 28 – July 1. Wouldn’t it be great to have a teacher blogger meet up around that? 
After lunch, most of us ventured to Ikea where I once again spent too much money on my classroom despite not needing anything in particular. I’d show you all of my finds, but I’m going to wait until my complete classroom reveal. Given that I start preplanning THIS THURSDAY and have students on August 1, that really won’t be too long to wait!

Have a great week!

My Trip to New Delhi & Hyderabad Cont………

My 4th OCA was done for an organization in Hyderabad and I experienced something I came across the last time I did an OCA in Hyderabad. Readers of my Blog may recall my last visit to Hyderabad and the post of 10/12/09. Talk about déjà vu it was very similar on this occasion as well, but the difference was that it was led by the senior members of the board, who were eminent individuals in their own right. (I am talking about an attempt by the organization to cover up facts that directly deals with their capacity during the OCA). What made it very unpalatable was that they gave a presentation on the history and activities of the organization and conveniently omitted these facts from the presentation. This to me is a bad sign and a major put off. The irony is that even with these capacity issues the organization is a relatively capable organization and can be developed to do better; and the purpose for the assessment is exactly to identify these gaps so that they may be able to qualify for a grant to develop their organizational capacity.

Other than this the rest of the assignment went as usual and finished the OCA by 4 PM on the 3rd of March. I went directly to the airport to take a flight to New Delhi for the 5th and last OCA. While waiting to board my flight I noticed a very weird thing. The displays at the Hyderabad airport that give flight departure details were giving a lot more information than it is logically required for passengers waiting to board flights. Let me explain; it starts with the information tag against the flights numbers as “Gate Open” and then as time goes by it proceeds to change the tags to “Final Call”, “Gate Closed”, “Boarding” and finally to “Departed”. In my experience this is the extent of the information which can be relevant to any passenger in the terminal and it stays for at least 10 to 15 minutes on the information board and then it is deleted from the board. However in Hyderabad Airport this is followed by another information tag saying “Airborne”; now who needs to know this? Does it mean that if you are late for the flight and that if the flight is not airborne they will put you on it? Don’t think so; as they say “gate closes 15 minutes before departure time”. Further given today’s security climate well-wishers are not allowed in the terminal. So go figure this one out.

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

For furniture, I love the few pieces I have and does not change, but as a blogger we discover daily news, it’s hard not to crack …

Above the living-dining room where Jo Yana chose to paint the main wall in pink – small nod to her favorite designer Karim Rashid … You’ll also notice the suspension ATOMIUM in Kundalini the most beautiful effect!

This room also houses the home theater installation conducted by Dynamic Home Cinema. In front of these gorgeous wooden drops are pregnant Y21.2 Audio Linear …

At the entrance, a picture of Miles Aldridge sets the tone of the apartment, and FIDELIO Philips broadcasts Playlist place … On the side of the dining room, chairs LOUIS GHOST EROS and greet guests.

The main hall lit by the luminaire BLOB M Karim Rashid …

The cuisine is inspired by Parisian apartment signed Périchon we mention above, because the walls and ceiling were painted in gray have to emphasize the white lacquered furniture. Yellow light under the bar and a nice bin Brabantia bring the strand of color …

We love the headboard PARROT signed by photographer Solve Sundsbo …

The workspace of blogger … A reading area with ottoman LEBLON DELIENNE-QUAD and library. An office signed K-DESIGN, and the now famous chair VERTEX signed Karim Rashid.

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

Marathon Training Tips

As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
Determining Starting Point

The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
Training Mix

Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!